Quantification of carbon nanotube dispersion and its correlation with mechanical and thermal properties of epoxy nanocomposites

An experimental study is carried out to quantitatively assess the dispersion quality of carbon nanotubes (CNTs) in epoxy matrix as a function of CNT variant and weight fraction. To this end, two weight fractions (0.05% and 0.25%) of as-grown, oxidized, and functionalized CNTs are used to process CNT/epoxy nanocomposites. Scanning electron microscopy, X-ray diffraction, and Fourier transform infrared analysis of different variants of CNTs are used to establish the efficiency of purification route. While the relative change in mechanical properties is investigated through tensile and micro-hardness testing, thermal conductivity of different nanocomposites is measured to characterize the effect of CNT addition on the average thermal properties of epoxy. Later on, a quantitative analysis is carried out to establish the relationship between the observed improvements in average composite properties with the dispersion quality of CNTs in epoxy. It is shown that carboxylic (-COOH) functionalization reduces the average CNT agglomerate size and thus ensures better dispersion of CNTs in epoxy even at higher CNT weight fraction. The improved dispersion leads to enhanced interfacial interaction at the CNT/epoxy interface and hence provides higher relative improvement in nanocomposite properties compared to the samples prepared using as-grown and oxidized CNTs. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48879.     

The critical organic modifier aliphatic tail length for the formation of poly(methyl methacrylate)-montmorillonite nanocomposites

In this article, we report the influence of organic modifier structure (alkyl chain length C8-C20, single vs ditallow) and thereby, the effect of hydrophobicity on the structure, thermal and mechanical properties of poly(methyl methacrylate) (PMMA)-clay hybrids. Melt processed PMMA-clay hybrids were characterized using wide-angle X-ray diffraction, transmission electron microscopy, and differential scanning calorimetry. The organoclays having an alkyl chain length of more than 12 CH₂ groups resulted in the formation of nanocomposites. The glass transition temperature (T_g) of PMMA increased in the presence of clay. The mean-field lattice model was used to predict the free energy for nanocomposite formation, which showed a reasonable match with the experimental results and provided a general guideline for the proper selection of polymer and organoclay (ie, organic modifier) to obtain nanocomposite. Tensile modulus showed maximum improvement of 58% for the nanocomposites compared to 9% improvement for the composites. Tensile modulus increased with increases in the alkyl chain length of the organic modifier and clay loading. The level of improvement for the tensile properties of nanocomposites prepared from primary and secondary ammonium-modified clay is the same as that obtained with the commercial organoclays.     

Identification of monofloral honey using voltammetric electronic tongue

Quality assessment of honey is often related to its floral origin which is a complex task to evaluate. Traditional technique of floral assessment is made by melissopalynological method. However, this method is quite time consuming and also often operator dependent. Thus, the fallout is a large range of error in interpretation of the result and hence there is considerable demand for instrumental methods to assess the identification of pollen in honey. In this pursuit, an electronic tongue based on cyclic voltammetry is developed to discriminate honey samples based on their floral types and is described in this paper. The technique has been investigated using platinum as the working electrode and the resultant current from the potentiostat has been considered for data analysis. The use of principal component analysis (PCA) and linear discriminate analysis (LDA) proves to be useful in clustering honey samples. Finally, classification performances are investigated using back-propagation multilayer perceptron (BP-MLP) and radial basis function (RBF) neural network models for identification of different floral origin of honey.     

Detection of Adulteration of Meat and Meat Products with Buffalo Meat Employing Polymerase Chain Reaction Assay

The primer pair was designed based on mitochondrial d-loop gene for detection of adulteration of buffalo meat in admixed meat and meat products by polymerase chain reaction (PCR) assay. Amplification of 537-bp DNA fragments was observed from buffalo, without any cross-reaction with cattle, sheep, goat, pig, and chicken. The amplification was further confirmed by BamHI restriction enzymes. No adverse effect of processing was found on PCR amplification of buffalo meat DNA extracted from processed meat and meat products, even from meat emulsion autoclaved at 121 °C, 20 psi for 15–20 min. The detection limit for buffalo meat was found to be 1% in the admixed meat and meat products; however, very faint and inconsistent results were obtained in autoclaved meat emulsion at 1% level. The developed PCR assay was found to be specific for buffalo and could be a useful tool for detection of meat adulteration.     

Estimation of convective mass transfer in solar distillation systems

In this article a thermal model has been developed to determine the convective mass transfer for different Grashof Number range in solar distillatiOn process. The model is based on simple regression analysis. Based on the experimental data obtained from the rigorous outdoor experimentation on passive and active distillation systems for summer climatic conditions, the values of C and n have been calculated. The modified values of C and n for Nu=C(GrPr)ⁿ, are proposed as C=0.0322; N=0.4114 for 1.794 × 10⁶6 in a passive solar still and C=0.0538; N=0.383 for 5.498 × 10⁶6 in an active solar still. The percentage deviation between experimental and theoretical results are found within an accuracy of 12%.     

Photochemistry on a polarisable semi-conductor: what do we understand today?

The continued development of ferroelectric materials into more and more consumer led applications has been at the forefront of recent ferroelectric material research. It is, however, possible to view a ferroelectric as a wide band gap semi-conductor that can sustain a surface charge density. This charge density arises from the movement of ions in the crystal lattice and the need to compensate for this charge. When viewing ferroelectrics as polarisable semi-conductors a large number of new interactions are possible. One such is the use of super band gap illumination to generate electron–hole pairs. These photogenerated carriers can then perform local electrochemistry. What is most interesting for ferroelectric materials is that the REDOX chemistry can be chosen by selectively modifying the domain structure of the ferroelectric—we can perform oxidation and reduction on the surface of the same material at spatially separate locations, or use the material to drive photoexcited carriers apart. This means we can separate the REDOX products or produce patterns of photogenerated material in places we have predetermined. This review aims to introduce the background research that has led to the current understanding as well a highlight some of the current areas that require further development.     

Failure Analysis of AISI 440C Steel Ball Screws Used in the Actuator System of a Satellite Launch Vehicle

In view of its excellent wear and corrosion resistance, AISI 440C steel is the material of choice for the fabrication of ball screws used in actuator systems of satellite launch vehicles. During the routine acceptance test of a ball screw, longitudinal cracks were observed at the shaft location of the ball screw. The optical microstructure of the ball screw material (AISI 440C) revealed the presence of aligned carbides (carbide banding). Fractographic observations revealed the cracking to be along the carbide bands. Based on detailed optical and scanning electron microscopic observations, the cracking of the ball screws was attributed to the carbide bands.     

Estimation of internal heat transfer coefficients of a hybrid (PV/T) active solar still

In this paper, an attempt is made to estimate the internal heat transfer coefficients of a deep basin hybrid (PV/T) active solar still. The estimation is based on outdoor experimental observation of hybrid (PV/T) solar still for composite climate of New Delhi (latitude 28°35′N and longitude 77°12′E). The internal heat transfer coefficients are evaluated by using thermal models proposed by various researchers. The comparison of hourly yield predicted using various thermal models to the experimental has also been carried out by evaluating the correlation coefficient and percentage deviation. It is observed that, Kumar and Tiwari model (KTM) better validate the results than the others model. The average annual values of convective heat transfer coefficient for the passive and hybrid (PV/T) active solar still are observed as 0.78 and 2.41 W m⁻² K⁻¹, respectively at 0.05 m water depth.