The Measurement of Internal Stress in Electrodeposits

The fundamental principles and underlying methods of measuring internal stress in electrodeposits are reviewed and special attention is given to the bent strip methods. The advantages of the Hoar-Arrowsmith continuous measuring null instrument (Trans Inst Metal Finishing, 1957, 34, 354) are emphasized and a refined theoretical treatment is presented. A comparison is made between the formulae derived by various authors, and approximations involved are examined. Percentage errors, which are frequently quite large, are presented for many of the cases.     

Characterization of Impact Damage in Ultra-High Performance Concrete Using Spatially Correlated Nanoindentation/SEM/EDX

Little work has been done to study the fundamental material behaviors and failure mechanisms of cement-based materials including ordinary Portland cement concrete and ultra-high performance concretes (UHPCs) under high strain impact and penetration loads at lower length scales. These high strain rate loadings have many possible effects on UHPCs at the microscale and nanoscale, including alterations in the hydration state and bonding present in phases such as calcium silicate hydrate, in addition to fracture and debonding. In this work, the possible chemical and physical changes in UHPCs subjected to high strain rate impact and penetration loads were investigated using a novel technique wherein nanoindentation measurements were spatially correlated with images using scanning electron microscopy and chemical composition using energy dispersive x-ray microanalysis. Results indicate that impact degrades both the elastic modulus and indentation hardness of UHPCs, and in particular hydrated phases, with damage likely occurring due to microfracturing and debonding.     

A comparison of thromboelastography with heparinase or protamine sulfate added in vitro during heparinized cardiopulmonary bypass

Thromboelastography (TEG) has been used after cardiopulmonary bypass (CPB) to diagnose excessive postoperative hemorrhage. Conventional TEG during CPB is not possible due to the sensitivity of the TEG to even small amounts of heparin, which produces a nondiagnostic tracing. The purpose of this study was to compare heparin neutralization using heparinase or protamine in TEG blood samples obtained during CPB. TEG testing was performed on 48 patients before, during and after CPB. Tissue plasminogen activator activity and antigen were measured on a subset of 32 patients. We found: 1) heparinase neutralized at least 10 IU/ml heparin while 1.6 ug/ml protamine neutralized up to 7 IU/ml heparin, 2) in samples with complete heparin neutralization by both methods, there was no significant difference in the R values, 3) while there was good correlation for other TEG parameters between heparinase and protamine treated samples, heparinase treatment produced shorter K values and higher angle, MA and A60, 4) while fibrinolysis was detected using both methods, heparinase treatment suppressed fibrinolysis in the TEG in both samples from patients and after in vitro addition of tissue plasminogen activator, 5) TEG was not a sensitive indicator of t-PA activity, detecting only 21% of samples with increased t-PA activity during bypass, and 5) heparinase was at least 100 times more expensive than protamine. We conclude that while both heparinase and protamine can be used to neutralize heparin in TEG samples obtained during CPB, protamine neutralization is more sensitive to fibrinolysis and less expensive, but the protamine dose must be carefully selected to match the heparin level used at individual institutions.     

DC transport measurements at 77 K of high Jccryostabilized melt processed YBCO monofilament

DC transport critical current density measurements, with J_c values up to 1.4×10⁵ A/cm² in zero field and 4.4×10⁴ A/cm² in 1 T, performed in liquid nitrogen on melt-processed YBCO fiber from 0 to 1 T, are reported. The measurement technique is described, and the effects of contact heating and cryostabilization are discussed     

Climate change and energy policy in Eastern Europe: Two scenarios for the future

The citizens of Poland, Eastern Germany, Czechoslovakia, Hungary, and Romania inhabit perhaps the most polluted environments in the world, largely because of their countries' inefficient use of energy. Energy use is two to three times greater per unit of economic output than in Western Europe. Energy inefficiency also constrains economic growth by diverting capital to unproductive use. As much as 40% of all industrial investment in Poland was consumed in energy production.The emerging democracies of Eastern Europe have embarked on reforms to make their economies more efficient. We assess their potential for energy efficiency and apply end-use analysis in an energy end-use economic model to evaluate future energy use in the region. We assume that Eastern Europe will approach current Western living standards over the next three decades and that this will in turn increase energy consumption. We have found, nevertheless, that Eastern European nations could hold energy demand virtually constant through structural reform and technical energy-efficiency improvement. The six countries in the region could save as much as 3.5 exajoules per year, with savings yielding an economic benefit of $300 million annually.Capturing the energy-efficiency potential in Eastern Europe would require a combination of market forces and policy initiatives. Such optimistic prediction, however, should not be taken at face value. Financial and technical constraints will impede some of the potential gains in energy efficiency in Eastern Europe. Overcoming them will require national leadership and decisive international cooperation.     

Learning and understanding science instructional material.

Learning and understanding of science instructional material was examined from a cognitive load perspective. It was suggested that instructions can be difficult to learn if multiple elements of information need to be simultaneously processed through limited working memory. Diagrams were expected to reduce cognitive load by allowing students to process information using fewer elements in working memory than an equivalent text-based format. However, if instructional information could be processed serially, then working-memory load should be light, and both diagrammatic and text-based instructions were hypothesized to be equally effective. Two experiments using different chemistry instructions confirmed these hypotheses and so highlight the role of cognitive load factors in instructional design. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

In situ strength criteria for tunnel design in highly-stressed rock masses

The selection of rock mass strength parameters and the approach to assessing the mechanical and thermal-mechanical rock mass behaviour around tunnels are important aspects of designing underground openings for a spent nuclear fuel waste repository. This paper demonstrates how strength criteria based on in situ observations can be used to design stable underground openings in rock masses subjected to adverse stress conditions. The findings are based upon work conducted at AECL’s Underground Research Laboratory (URL) regarding rock mass strength around tunnels in sparsely fractured granite.