Effects of microelements on soil nematode assemblages seven years after contaminating an agricultural field

Long-term effects of Cd, Cr, Cu, Se and Zn were studied 7 years after artificially contaminating plots of an agricultural field on a calcareous chernozem soil. Effects of three to four different contamination levels (originally 10, 30, 90 and 270 mg kg⁻¹) were studied. Nematode density was significantly reduced by 90 and 270 mg kg⁻¹ Se as well as by 270 mg kg⁻¹ Cr, while 90 and 270 mg kg⁻¹ Se also reduced nematode generic richness. Maturity Index values (calculated for c-p 2–5 nematodes) consistently decreased with increasing Cr and Se concentration and to a lesser extent in Zn plots as well. Structure Index showed decreasing trends in increasing Cr, Se and (to a lesser extent) in Zn treatments, while in Cd it shows a moderate increase. Distribution of c-p groups was negatively affected by the increasing Cr and Se concentration, while in Zn plots, this decrease was not significant. Response of feeding groups to pollutions was similar to other parameters: Cr and Se caused significant changes toward the loss of variability. The proportion of the most sensitive omnivorous and predatory nematodes decreased clearly as a consequence of Cr and Se treatments. Zn pollution also resulted in a slight decrease in this group, while Cd caused an increase. Nematode diversity profiles showed a significant decrease in the plots of increased Cr and Se concentrations, while increased concentrations of Cu and Zn resulted in ambiguous effects. Besides providing evidence on the harmful effects of Cr and Se on a soil nematode assemblage, our results suggest that simultaneous analysis of Maturity Index, Structure Index and diversity profiles provide a promising tool in nematological indication of soil pollution.     

Deoxynivalenol in wheat,maize, wheat flour and pasta: surveys in Hungary in 2008–2015

Among Fusarium mycotoxins, deoxynivalenol (DON) is the most common contaminant in case of cereals and cereal-based foods in Hungary. In this study, Hungarian wheat (n = 305), maize (n = 108), wheat flour (n = 179) and pasta (n = 226) samples were analysed (N = 818). The samples were collected during 2008–2015 in Hungary. Applied methods of analysis were enzyme-linked immunosorbent assay and liquid-chromatography coupled with a mass spectrometer. Results were compared and evaluated with Hungarian weather data. Among cereal samples, in 2011, wheat was contaminated with DON (overall average ± standard deviation was 2159 ± 2818 µg kg^?1), which was above the maximum limit (ML). In case of wheat flour and pasta, no average values above ML were found during 2008–2015, but higher DON contamination could be observed in 2011 as well (wheat flour: 537 ± 573 µg kg^?1; pasta: 511 ± 175 µg kg^?1).     

Defect detection in analog and mixed circuits by neural networks using wavelet analysis

An efficient defect-oriented parametric test method for analog & mixed-signal integrated circuits based on neural network classification of a selected circuit's parameter using wavelet decomposition preprocessing is proposed in this paper. The neural network has been used for detecting catastrophic defects in two experimental analog & mixed-signal CMOS circuits by sensing the abnormalities in selected parameters, observed under defective conditions and by their consequent classification into a proper category. To reduce complexity of the neural network, wavelet decomposition is used to perform preprocessing of the analyzed parameter. Moreover, we show that wavelet analysis brings significant enhancement in the correct classification, and makes the neural network-based test method extremely efficient & versatile for detecting hard-detectable catastrophic defects in analog & mixed-signal circuits.     

3-D route-planning support for navigation in a complex indoor environment

Three-dimensional (3-D) route-planning support offers a promising solution to overcome problems with wayfinding in complex indoor environments. An experiment was conducted to test the effect of 3-D route-planning support in a realistic setting, a large hospital building, during normal operation. Forty participants performed navigation tasks either with (n?=?20) or without (n?=?20) 3-D route-planning support. Support resulted in faster navigation, more use of artwork specifically installed to aid wayfinding, fewer navigation errors, less disorientation and less anxiety. In addition, participants used different strategies for wayfinding: without navigation support they used signs and route colour, but with navigation support they used not only the artwork, but also the existing furniture and other landmarks. The acceptance of 3-D route-planning support was high. Overall, the results support the value of 3-D route-planning support.     

Hybrid MCM-41 grafted by a general microwave-assisted procedure: a characterization study

Hybrid materials obtained through a Microwave-assisted grafting of organic functional groups on mesoporous silica (MCM-41 type) have been characterized by X-ray powder diffraction, TG-DSC, N₂ adsorption, solid state ¹³C- and ²⁹Si-NMR, TEM and SEM. The studied grafting procedure is effective in the preparation of hybrid organosilicas under solvent-free conditions. Microwaves allows an ultra-fast and clean functionalization of the mesoporous materials and the method has been applied to produce a wide series of functional materials. The hybrid materials maintain the original mesoporous structure when the loading of linked organic groups does not exceed 10 %. In this cases, the slight pore volume reduction is linearly correlated to the organic amount in the product. If functional groups able to interact among them through hydrogen bond are used, hybrid materials exhibit high Organic/SiO₂ ratios and low pore volumes due to the formation of a network occluding the pores, where functional groups of free organosilane molecules interacts with the functional groups of molecules linked to the matrix. NMR data confirm that the network is composed by organosilane molecules linked or not to the framework. Acid washing is able to labilize hydrogen bond and open the network. In the case of bulky but chemically inert functionalising agents the network is not produced.     

Biosynthesis and PBAN-Regulated Transport of Pheromone Polyenes in the Winter Moth, Operophtera brumata

The trienoic and tetraenoic polyenes, (3Z,6Z,9Z)-3,6,9-nonadecatriene, (3Z,6Z,9Z)-3,6,9-henicosatriene, and (3Z,6Z,9Z)-1,3,6,9-henicosatetraene were found in the abdominal cuticle and pheromone gland of the winter moth Operophtera brumata L. (Lepidoptera: Geometridae), in addition to the previously identified single component sex pheromone (3Z,6Z,9Z)-1,3,6,9-nonadecatetraene. The pheromone biosynthesis activating neuropeptide (PBAN) is involved in the regulation of polyene transport from abdominal cuticle to the pheromone gland. In vivo deuterium labeling experiments showed that (11Z,14Z,17Z)-11,14,17-icosatrienoic acid, the malonate elongation product of linolenic acid, (9Z,12Z,15Z)-9,12,15-octadecatrienoic acid, is used to produce (3Z,6Z,9Z)-3,6,9-nonadecatriene and (3Z,6Z,9Z)-1,3,6,9-nonadecatetraene.     

Optical gain in 1.3-μm electrically driven dilute nitride VCSOAs

We report the observation of room-temperature optical gain at 1.3 μm in electrically driven dilute nitride vertical cavity semiconductor optical amplifiers. The gain is calculated with respect to injected power for samples with and without a confinement aperture. At lower injected powers, a gain of almost 10 dB is observed in both samples. At injection powers over 5 nW, the gain is observed to decrease. For nearly all investigated power levels, the sample with confinement aperture gives slightly higher gain.     

Compressive properties of pristine and SiC-Te-added MgB2 powders,green compacts and spark-plasma-sintered bulks

Pristine and (SiC+Te)-added MgB₂ powders, green and spark plasma sintered (SPS) compacts were investigated from the viewpoint of quasi-static and dynamic (Split-Hopkinson Pressure Bar, SHPB) compressive mechanical properties The amount of the additive (SiC+Te) was selected to be the optimum one for maximization of the superconducting functional parameters. Pristine and added MgB₂ show very similar compressive parameters (tan δ, fracture strength, Vickers hardness, others) and fragment size in the SHPB test. However, for the bulk SPSed samples the ratio of intergranular to transgranular fracturing changes, the first one being stronger in the added sample. This is reflected in the quasi-static K_IC that is higher for the added sample. Despite this result, sintered samples are brittle and have roughly similar fragmentation behavior as for brittle engineering ceramics. In the fragmentation process, the composite nature of our samples should be considered with a special focus on MgB₂ blocks (colonies) that show the major contribution to fracturing. The Glenn-Chudnovsky model of fracturing under dynamic load provides the closest values to our experimental fragment size data.     

Heat-treatment of isomorphously substituted ZSM-5 (MFI) zeolites An ESR and Mössbauer spectroscopy and kinetic study

Fe-ZSM-5 zeolites comprise of three types (I, II and III) of iron (Fe³⁺) sites in both as synthesized (AS) and heat-treated states. Previous evidence could be confirmed by the assignment of ESR lines, registered in the X-band, stating: (i) type I framework Fe³⁺ sites (in T_h oxygen coordination), where charge compensation occurs mainly by Na⁺ ions and the crystal field (cf) approximates cubic symmetry, produce resonances at near to g = 2.00; (ii) type II and probably type III binuclear Fe...Fe dioxo- and oxo-bridges manifest themselves in producing slightly distorted surroundings of axial symmetry, and the relevant powder-averaged subspectrum is superimposed on the previous one in the g  2.45–1.98 interval. As the temperature of the heat-treatment (HT) is raised, type II and III sites will be annihilated with preference, under concomitant production of amorphous Fe₂O₃ possessing molecular dispersity. (iii) The weak ESR signal (2–4%) at g  4.27 is attributed to T_h coordinated framework sites in the surface layers (≈ 1 u.c. thick) under the influence of solid surface tension, giving rise to fully rhombic cf symmetry.

The size of the ejected Fe₂O₃ particles, as estimated from Mössbauer spectra (no hyperfine structure at 77 K) is less than 2.9 nm. The extremely large electron affinity of Fe³⁺ ions manifests itself in decreased ionicity (and unexpectedly dominant cubic symmetry), activity in biomimetic oxidations, autoreduction and spontaneous reoxidation etc.

In the liquid phase oxidation by hydrogen peroxide of n-hexane and cyclohexane the heat-treated Ti-ZSM-5 samples exhibited both activity- and selectivity dependence on HT. On the basis of experiences drawn from the heat-treatments proposal is made for the structures of the defect site (producing the 960 cm⁻¹ IR signal) and the active centre of selective oxidation. The proposal seems to be in accord with the experimental observations (isotopic exchange, MAS-NMR behaviour etc.) published so far.