The Vortex Path Model Analysis of the Field Angle Dependence of the Critical Current Density in Nanocomposite YBa2Cu3 O 7−x – BaZrO3 Films Obtained by Low Fluorine Chemical Solution Deposition

In the present paper, we analyze the role of in situ grown BaZrO₃ (BZO) inclusions in YBa₂Cu₃O_7?x (YBCO) thin films prepared by chemical solution deposition using a low fluorine coating solution, on the field angle dependence of the critical current density, J _c (??), data using the vortex path model. In order to form a coherent picture on the BZO doping influence on the pinning properties of the YBCO matrix, detailed structural analyses performed by X-ray diffraction techniques and microstructural evaluation by transmission electron microscopy are also presented. The evaluation of different contributions to the overall, J _c , permitted us to prove the effectiveness of the BZO inclusions acting as isotropic pinning centers, reflected in a uniform component of high relative value with respect to other components. For the studied 10 mol % BZO doping concentration, a threefold increase in the critical current density, J _c , of the YBCO host is measured, in self-field at 77 K, corresponding to a value of J _c =2.9MA/cm², whereas a factor 10 is measured at 1 T (J _c =0.35 MA/cm²).     

CFD models in the development of electrical waste recycling technologies

Nowadays electrical waste (EW) recycling has become a practical way to provide raw material for new devices. Computer parts such as memory, motherboard or other parts contain large amount of metals from which the recovery of precious metals and copper represents the highest economical potential. With a proper chemical treatment these metals can be efficiently extracted and separated from the actual waste. For this task a specially designed leaching reactor, equipped with a perforated rotating drum, was used. This work is aimed at investigating if computational fluid dynamics (CFD) tools can be efficiently applied to model the chemical reactor used to dissolve the metals from the EW. First a hybrid CFD-compartment approach was developed to describe the dissolution process in the leaching reactor while the CFD models were used to model the hydrodynamics of the process. Based on the detailed model containing momentum and component mass balance the developed simulator could be used to enhance the performance of the existing reactor system. For the modelling studies COMSOL Multiphysics was used as CFD software.     

Interactions in the complement-mediated lysis of blood group AB erythrocytes sensitized simultaneously with anti-A and anti-B monoclonal antibodies

The lysis of group AB erythrocytes by human complement was studied by different anti-A and anti-B IgM monoclonal antibodies (mabs) in a 51Cr-release assay. The concentration of membrane-bound immunoglobulin was detected by ELISA, and the amount of C1q and C3 bound to sensitized red cells was measured by using purified, 125I-labelled molecules. We have demonstrated that there is an exponential relationship between the concentration of the sensitizing IgM mabs and C1q binding to the sensitized AB cell. The efficiency of binding was related to the number of antibodies bound; thus, anti-A sensitized cells bound 3-6 times more C1q than anti-B sensitized cells did. AB cells, on the other hand, bound similar amounts of C3 whether anti-A or anti-B was present. The lytic efficiencies of the various IgM mabs during short incubation times were different, suggesting that the complement activation rates vary widely with different antibodies on the AB cell membrane. The binding of C1q to an antibody-sensitized target activates a cascade, whose components may migrate away from the sensitizing antibody; interactions between the activation processes generated by the anti-A and anti-B antibodies may thus occur. Choosing appropriate pairs of anti-A and anti-B mabs for the simultaneous sensitization of AB cells has indeed resulted in stimulation in some and inhibition in other combinations of mabs. It is suggested that stimulation is observed when the activated intermediates are produced in excess, whereas inhibition occurs when a shortage of activated intermediates prevents mutual utilization.     

Switched-Capacitor Track-and-Hold Amplifiers With Low Sensitivity to Op-Amp Imperfections

This paper describes high-precision switched-capacitor (SC) track-and-hold amplifier (THA) stages. They use a novel continuous-time correlated double sampling (CDS) scheme to desensitize the operation to amplifier imperfections. Unlike earlier predictive-CDS amplifiers, the circuits do not need a sampled-and-held input signal for their operation. During the tracking period, an auxiliary continuous-time signal path is established, which predicts the output voltage during the holding period. This allows accurate operation even for low amplifier gains and large offsets over a wide input frequency range. Extensive simulations were performed to compare the performance of the proposed THAs with earlier circuits utilizing CDS. The results verify that their operation is far more robust than that of any previously described SC amplifiers     

Ragweed allergy: correlation between skin reactivity and in vitro complement activation

Recently we have reported on several observations which indicate that allergen-induced complement activation contributes to the development of the symptoms of ragweed allergy. In the present paper a new finding that supports this assumption is summarized. In 48 ragweed-allergic patients individual skin reactivity to ragweed allergen extract (RWA) was assessed using dilution skin prick testing. Sera of these patients were incubated with 20, 100, and 400 U/ml RWA and generation of two complement activation products, alternative pathway C3-convertase (C3bBbP) and terminal pathway activation complex (C5b-9) was measured by ELISA methods. A strong positive correlation (Spearman correlation coefficient r = 0.495, P = 0.0004, and r = 0.454, P = 0.0012, respectively) was found between individual skin reactivity to RWA and C3bBbP generation induced by 20 and 100 A allergological units/ml (U/ml) RWA. This finding further supports the role of complement activation products in the aggravation of the basic IgE-mediated immunopathology of ragweed allergy.     

In situ electrochemical impedance spectroscopy of Zr–1%Nb under VVER primary circuit conditions

Oxide layers were grown on tubular samples of Zr–1%Nb under conditions simulating those in VVER-type pressurised water reactors, viz. in near-neutral borate solutions in an autoclave at 290 °C. These samples were investigated using electrochemical impedance spectroscopy which was found to be suitable to follow in situ the corrosion process. A –CPE_oxR_ox– element was used to characterise the oxide layer on Zr–1%Nb. Both the CPE_ox coefficient, σ_ox, and the parallel resistance, R_ox, were found to be thickness dependent. The layer thickness, however, can only be calculated after a calibration procedure. The temperature dependence of the CPE_ox element was also found to be anomalous while the temperature dependence of R_ox indicates that the oxide layer has semiconductor properties. The relaxation time – defined as (R_oxσ_ox)^1/ – was found to be quasi-independent of oxidation time and temperature; thus it is characteristic to the oxide layer on Zr–1%Nb.     

Neural network methods for the modeling and control of welding processes

While welding processes are of great importance in manufacturing, their modeling and control is still subject of research. The highly nonlinear, strongly coupled, and multivariable nature of these processes renders the use of analytical tools practically impossible. In this article a novel approach is presented which employs networks of simple nonlinear units: a neural network. A widely used welding process, the Gas Tungsten Arc Welding is presented and the problem of its modeling and control is exhibited. A very brief introduction to neural networks is followed by presenting the experimental results for modeling the static and dynamic behavior of the process, as well as some practical recommendations regarding the use of the neural network techniques for controlling these processes.