Usefulness of a set of simple in vitro tests for the screening and identification of probiotic candidate strains for dairy use

A set of simple in vitro tests (identification by species-specific PCR, genetic diversity, phage sensitivity, growth and viability in milk, resistance to salts and flavor compounds, bacterial interactions, tolerance to simulated gastric juice and bile, bile salts deconjugation, hydrophobicity and β-galactosidase and antibacterial activities), that can be carried out in almost every laboratory of microbiology, mainly in developing countries where there is often limited access to sophisticated techniques, allowed us to identify, among 19 intestinal human isolates, a potential candidate for new probiotic dairy foods for the local market. Lactobacillus gasseri LgF_37/1 performed well in the culture media used for the enumeration of probiotic bacteria in argentinian dairy products. This strain showed also high tolerance to the technological challenges assessed, bile salts resistance, the capacity to produce bacteriocin-like metabolites, to inhibit pathogenic bacteria, to deconjugate bile salts and high hydrophobicity. Further in vivo research should be carried out with this strain before claiming probiotic properties for it. However, the use of a set of simple in vitro techniques proved to be important to determine which strains should undergo future and more complex studies.     

Invertebrate communities in Compensation Creek,a man‐made stream in boreal Newfoundland: The influence of large woody debris

Benthic invertebrate communities were examined in Compensation Creek, a man‐made stream in south‐central Newfoundland, Canada. Samples taken in September 2006 and September 2007 from large woody debris (LWD) were compared with samples from benthic environments to determine whether LWD supported a more diverse and abundant invertebrate community. Benthic habitats in a nearby natural stream were also sampled. Taxa composition was similar between the man‐made and the natural stream, highlighting successful colonization for the majority of taxa. Within Compensation Creek, taxa richness was higher in benthic habitats than on LWD, likely influenced by the successional age of the stream and surrounding habitat. The more complex benthic substrate provided refugia and allowed for the accumulation of fine detritus as a food source. Scrapers were almost completely absent from LWD and collector‐gatherer abundance was greater in the benthos. Collector‐filterer abundance was more than six times greater near the pond outflow than farther downstream when discharge was high, but abundances were almost equal when discharge was reduced. Riparian vegetation has not fully established around the man‐made stream, whereas it is overhanging and extensive at the natural stream, leading to more leaf‐litter input for shredders. As the morphology of Compensation Creek changes, the invertebrate community will continue to develop and likely increase utilization of accumulated detritus at LWD. Copyright © 2009 John Wiley & Sons, Ltd.     

Spatial distribution and habitat characterization of schistosomiasis host snails in lake and land habitats of western Kenya

Intermediate host snails of schistosomiasis were surveyed in this study to determine their abundance and distribution in the lake and land aquatic habitats of Lake Victoria basin of Kenya. Several sites were sampled at eight locations, both in the lake and on the land. The habitat and/or vegetation type (i.e. open water, hippo grass, hyacinth, ambatch trees, other vegetation, stream, swamp, pond, dam) of the sampled aquatic sites within the locations were also differentiated, water physicochemical parameters were determined, and the abundance of different species or taxa of phytoplankton and zooplankton were enumerated and correlated with the abundance of schistosomiasis snails in the sites. The results indicated significantly more Biomphalaria sudanica snails than Bulinus africanus snails in different physical habitats on land (Student's t‐test, P < 0.05), as well as in different locations on land (Student's t‐test, P = 0.026). Regression analyses revealed that several physicochemical parameters, including dissolved oxygen (R² = ?0.659; n = 8; P = 0.014), pH (R² = 0.728; n = 8; P = 0.007) and turbulence (R² = ?0.616; n = 8; P = 0.02), were predictive of Biomphalaria spp. abundance, while pH (R² = 0.610; n = 8; P = 0.02) and turbulence (R² = ?0.578; n = 8; P = 0.028) were predictive of Bulinus spp. abundance in different locations in the lake. Cyanobacteria (R² = 0.638; n = 8; P = 0.02) and chlorophyceae (R² = ?0.50; n = 8; P = 0.05) were shown to be predictive of both Biomphalaria spp. and Bulinus spp. abundance in different locations in the lake. Zooplankton abundance varied significantly between different locations in the lake (One‐way anova , P < 0.001). Bosmina spp. were found to be predictive of both Biomphalaria spp. (R² = ?0.627; n = 8; P = 0.01) and Bulinus spp. (R² = ?0.50; n = 8; P = 0.05) in different locations in the lake. The results from this study will help inform policy regarding control measures for schistosomias and intermediate snail hosts in Lake Victoria waters, as well as in adjacent terrestrial aquatic habitats and even beyond.     

Power consumption reduction through elastic data rate adaptation in survivable multi-layer optical networks

Network survivability requires the provisioning of backup resources in order to protect active traffic against any failure scenario. Backup resources, however, can remain unused most of the time while the network is not in failure condition, inducing high power consumption wastage, if fully powered on. In this paper, we highlight the power consumption wastage of the additional resources for survivability in IP/multi-protocol label switching (MPLS) over dense wavelength division multiplexing multi-layer optical networks. We assume MPLS protection switching as the failure recovery mechanism in the network, a solution interesting for current network operators to ensure fast recovery as well as fine-grained recovery treatment per label switched path. Next, we quantitatively show how elastic optical technologies can effectively reduce such a power consumption by dynamically adjusting the data rate of the transponders to the carried amount of traffic.     

Liquid Metal Based Island‐Bridge Architectures for All Printed Stretchable Electrochemical Devices

The adoption of epidermal electronics into everyday life requires new design and fabrication paradigms, transitioning away from traditional rigid, bulky electronics towards soft devices that adapt with high intimacy to the human body. Here, a new strategy is reported for fabricating achieving highly stretchable “island‐bridge” (IB) electrochemical devices based on thick‐film printing process involving merging the deterministic IB architecture with stress‐enduring composite silver (Ag) inks based on eutectic gallium‐indium particles (EGaInPs) as dynamic electrical anchors within the inside the percolated network. The fabrication of free‐standing soft Ag‐EGaInPs‐based serpentine “bridges” enables the printed microstructures to maintain mechanical and electrical properties under an extreme (≈800%) strain. Coupling these highly stretchable “bridges” with rigid multifunctional “island” electrodes allows the realization of electrochemical devices that can sustain high mechanical deformation while displaying an extremely attractive and stable electrochemical performance. The advantages and practical utility of the new printed Ag‐liquid metal‐based island‐bridge designs are discussed and illustrated using a wearable biofuel cell. Such new scalable and tunable fabrication strategy will allow to incorporate a wide range of materials into a single device towards a wide range of applications in wearable electronics.     

Multiphase reactor scale-up for Cu–Cl thermochemical hydrogen production

This paper examines selected design issues associated with reactor scale-up in the thermochemical copper–chlorine (Cu–Cl) cycle of hydrogen production. The thermochemical cycle decomposes water into oxygen and hydrogen, through intermediate copper and chlorine compounds. In this paper, emphasis is focused on the hydrogen, oxygen and hydrolysis reactors. A sedimentation cell for copper separation and HCl gas absorption tower are discussed for the thermochemical hydrogen reactor. A molten salt reactor is investigated for decomposition of an intermediate compound, copper oxychloride (CuO·Cl₂), into oxygen gas and molten cuprous chloride. Scale-up design issues are examined for handling three phases within the molten salt reactor, i.e., solid copper oxychloride particles, liquid (melting salt) and exiting gas (oxygen). Also, different variations of hydrolysis reactions are compared, including 5, 3 and 2-step Cu–Cl cycles that utilize reactive spray drying, instead of separate drying and hydrolysis processes. The spray drying involves evaporation of aqueous feed by mixing the spray and drying streams. Results are presented for the required capacities of feed materials for the multiphase reactors, steam and heat requirements, and other key design parameters for reactor scale-up to a pilot-scale capacity.     

Toward a direct measure of video quality perception using EEG

An approach to the direct measurement of perception of video quality change using electroencephalography (EEG) is presented. Subjects viewed 8-s video clips while their brain activity was registered using EEG. The video signal was either uncompressed at full length or changed from uncompressed to a lower quality level at a random time point. The distortions were introduced by a hybrid video codec. Subjects had to indicate whether they had perceived a quality change. In response to a quality change, a positive voltage change in EEG (the so-called P3 component) was observed at latency of about 400-600 ms for all subjects. The voltage change positively correlated with the magnitude of the video quality change, substantiating the P3 component as a graded neural index of the perception of video quality change within the presented paradigm. By applying machine learning techniques, we could classify on a single-trial basis whether a subject perceived a quality change. Interestingly, some video clips wherein changes were missed (i.e., not reported) by the subject were classified as quality changes, suggesting that the brain detected a change, although the subject did not press a button. In conclusion, abrupt changes of video quality give rise to specific components in the EEG that can be detected on a single-trial basis. Potentially, a neurotechnological approach to video assessment could lead to a more objective quantification of quality change detection, overcoming the limitations of subjective approaches (such as subjective bias and the requirement of an overt response). Furthermore, it allows for real-time applications wherein the brain response to a video clip is monitored while it is being viewed.     

A contribution to the interpretation of polymer viscoelasticity in DMTA testing

Some ideas relevant to the prevailing viscoelasticity interpretations of dynamic mechanical thermal analysis (DMTA) experiments are presented. The main aspect is the inclusion of kinetic energy and inertia as variables, seeing the relaxing mass constantly increasing during strain, assigning inertial variation and not viscosity to energy dissipation. The equations developed make it possible to obtain the values of important viscoelastic properties, under in any experimental condition, with the data taken from previous experiments.     

A new cooling scheme for the HCLL TBM

The Helium Cooled Lithium Lead (HCLL) blanket is one of the two blanket concepts selected by the European Union to be tested in ITER. It is based on the use of Eurofer as structural material, helium as coolant and eutectic lithium–lead as breeder/neutron multiplier material. The design of the corresponding Test Blanket Module (TBM) for ITER has undergone several revisions in the last years. This paper presents an alternative cooling scheme for the HCLL-TBM, where the First Wall (FW) is cooled by vertical (poloidal) instead of horizontal (toroidal) channels. New Finite Element models have been developed and thermal and thermo-hydraulical analyses of the new design have been performed. Results show that the new cooling scheme presents several advantages with respect to the previous one: (i) the total number of cooling channels in the FW can be reduced; (ii) the overall pressure drops in one cooling channel are lower; (iii) the temperature profile in the breeding zone is more uniform.