Chemical doping of single-wall carbon nanotubes

Single-wall carbon nanotubes can be doped, or intercalated, with electron donors or acceptors, similar to graphite and some conjugated polymers. The resulting materials show many of the same features: enhanced electrical conductivity, conduction electron paramagnetism, partial or complete reversibility, and cyclability. Reactions may be carried out in vapor or liquid phase, or electrochemically. Structural information is sketchy at best, due to the limited quality of currently available materials and solvent-related effects. Recent developments in coagulation-based fiber extrusion and partially aligned materials offer new opportunities for novel material modifications by chemical doping.     

Relationships between psychophysically acceptable and maximum voluntary hand force capacity in the context of underlying biomechanical limitations

This research investigated if proportional relationships between psychophysically acceptable and maximum voluntary hand forces are dependent on the underlying biomechanical factor (i.e. whole body balance or joint strength) that limited the maximum voluntary hand force. Eighteen healthy males completed two unilateral maximal exertions followed by a 30 min psychophysical load-adjust protocol in each of nine pre-defined standing scenarios. Center of pressure (whole body balance) and joint moments (joint strength) were calculated to evaluate whether balance or joint strength was most likely limiting maximum voluntary hand force. The ratio of the psychophysically acceptable force to the maximal force was significantly different depending on the underlying biomechanical factor. Psychophysically acceptable hand forces were selected at 86.3 ± 19.7% of the maximum voluntary hand force when limited by balance (pulling exertions), 67.5 ± 15.2% when limited by joint strength (downward pressing) and 78 ± 23% when the limitation was undefined in medial exertions.     

Thermochemische Kennwerte für die Reaktion,Mo + O2 ⇌ MoO2 sowie in Eisenschmelzen

Zusammenstellung von Schrifttumsangaben für die Änderung der freien Standardenthalpien der Reaktionen , Mo + O₂ ? MoO₂ und in Eisenschmelzen. Neubestimmung der Temperaturabhängigkeiten der Größen ΔG^oCr₂O₃, ΔG^oMoO₂ und ΔG^o_O im Eisen bei Temperaturen zwischen 1460 bzw. 1530 und 1725 °C. Nachweis der Anwendbarkeit der neu ermittelten thermodynamischen Funktionen durch EMK-Parallelmessungen an ThO₂ (Y₂O₃)- und ZrO₂ (MgO)-Festelektrolytzellen mit Cr-Cr₂O₃- und Mo-MoO₂-Referenzelektroden in Reineisenschmelzen bei 1600 °C. Ermittlung des Parameters p_e′ der Elektronenteilleitfähigkeit für einen teilstabilisierten ZrO₂-Festelektrolyten mit einem Stoffmengengehalt von 5% MgO.     

A new version of AAKF (Reduced Tensor Matrix Elements) adapted to spectroscopic notation

Title of program: REDUCED TENSOR MATRIX ELEMENTS 2 Catalogue number: AAKP Program obtainable from: CPC Program Library, Queen's University of Belfast N. Ireland (see application form in this issue) Computer: Installation: IBM 360/75 University of Waterloo, Waterloo, Ont. Canada Operating system: OS/360 HASP II Programming languages used: FORTRAN IV High speed store required: 102 K bytes No. of bits per byte: 8 Overlay structure: None Other peripherals used: Card reader, line printer No. of cards in combined program and test deck: 1524 Card punching code: EBCDIC 029CPC Library subprograms used:

     

105.

Magnetic and nonmagnetic impurities in some A-15 structure systems. II. Magnetic properties     

Bongi  G. H.  Treyvaud  A.  Flükiger  R.  Fischer  ø. 《Journal of Low Temperature Physics》1976,23(5-6):571-597

We present measurements of the susceptibility of the A-15 structure systems NbyPt_100–y–x M _x where M = Fe and Ru (y = 73–78). These measurements correlated with those of the critical temperature T _c permit us to conclude that there is a saturation of the effective number of magnetic impurity atoms and that these atoms are situated on the chains. We find also that the magnetic moment of the Fe atoms depend on the value of y. The high value of the Curie temperature and its variation is discussed with the aid of a model of pairs with antiferromagnetic interaction. In order to describe the formation of the localized moments we have taken into account the effect of the environment around each impurity. Depending on the number and the nature of the nearest neighboring atoms, we deduce a magnetic or nonmagnetic behavior of the impurity. The variation of the moment as a function of the nearest neighbors is explained by supposing electronic redistribution between the atoms, which is the same as supposing an interatomic charge transfer.     

106.

Analysis of temperature-dependent optical gain in GaN-InGaN quantum-well structures     

B. Witzigmann V. Laino M. Luisier U.T. Schwarz H. Fischer G. Feicht W. Wegscheider C. Rumbolz A. Lell V. Harle 《Photonics Technology Letters, IEEE》2006,18(15):1600-1602

The temperature dependent spectral gain in InGaN-GaN multiple quantum-well structures with 10% In content is investigated. Mode gain is measured in a temperature range between 239 K and 312 K using the Hakki-Paoli technique and compared to simulations. The simulation accounts for temperature-dependent polarization dephasing, and hence homogeneous broadening, in a rigorous fashion, without any fit parameter. It is found that the evolution of the gain spectrum with temperature at different drive currents can be modeled using a temperature-independent single value for inhomogeneous broadening. The resulting compositional fluctuations are compared to structural measurements.     

107.

A Study on the Buckling Behaviour of Strips and Plates with Residual Stresses     

Franz Dieter Fischer  Nikolaus Friedl  Andreas No  Franz G. Rammerstorfer 《国际钢铁研究》2005,76(4):327-335

During and after rolling or flattening of metal strips and plates the permissible deviations from flatness are described by the permissible absolute wave height and the flatness index. Both values can be determined on a measuring table while the material is not subjected to global tension. Because this procedure is expensive, time‐consuming and allows measurement only at discrete positions along the strip length, on‐line flatness measuring systems are used which can detect the distribution of longitudinal tensile stresses distributed across the strip width allowing for the calculation of the flatness index. This value does not always agree with the value obtained directly by measuring on the table even when the measurement of the longitudinal tensile stress distribution operates perfectly. It can be shown that the measurement of the tensile stress distribution does not give a direct indication on the wave height in the tension‐free state determined on the measuring table. To explain the relationship between tensile stress distribution in the strip and the flatness measurement on the measuring table, the buckling behavior is analysed both with and without dead load for simple symmetrical residual stress distributions resulting, e.g., from the rolling process. Based on the knowledge of the distribution of the longitudinal residual stresses across the strip width, the flatness index and the wave height can be determined by using a specialized finite element model. If the direct measurement is performed under action of dead load, large differences between the directly and indirectly obtained flatness index are observed. Below a certain limit of the intensity of the residual stress distribution the strips and plates lie flat on the measuring table. Above this limit the strip lying on the table exhibits post‐bucking deformations. In the latter case, the wave height increases with strip thickness and intensity of residual stresses.     

108.

A Comparative Study of the Use of Visual Communicative Signals in Interactions Between Dogs (Canis familiaris) and Humans and Cats (Felis catus) and Humans.     

Miklósi  áam; Pongrácz  Péter; Lakatos  Gabriella; Topál  József; Csányi  Vilmos 《Canadian Metallurgical Quarterly》2005,119(2):179

Dogs' (Canis familiaris) and cats' (Felis catus) interspecific communicative behavior toward humans was investigated. In Experiment 1, the ability of dogs and cats to use human pointing gestures in an object-choice task was compared using 4 types of pointing cues differing in distance between the signaled object and the end of the fingertip and in visibility duration of the given signal. Using these gestures, both dogs and cats were able to find the hidden food; there was no significant difference in their performance. In Experiment 2, the hidden food was made inaccessible to the subjects to determine whether they could indicate the place of the hidden food to a naive owner. Cats lacked some components of attention-getting behavior compared with dogs. The results suggest that individual familiarization with pointing gestures ensures high-level performance in the presence of such gestures; however, species-specific differences could cause differences in signaling toward the human. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

109.

Crack Tip Shielding or Anti-shielding due to Smooth and Discontinuous Material Inhomogeneities     

N. K. Simha  F. D. Fischer  O. Kolednik  J. Predan  G. X. Shan 《International Journal of Fracture》2005,135(1-4):73-93

This paper describes a theoretical model and related computational methods for examining the influence of inhomogeneous material properties on the crack driving force in elastic and elastic-plastic materials. Following the configurational forces approach, the crack tip shielding or anti-shielding due to smooth (e.g. graded layer) and discontinuous (e.g. bimaterial interface) distributions in material properties are derived. Computational post-processing methods are described to evaluate these inhomogeneity effects. The utility of the theoretical model and computational methods is demonstrated by examining a bimaterial interface perpendicular to a crack in elastic and elastic-plastic compact tension specimens.     

110.

Conservative availability analyses including dependent failures in redundant I&C-systems with recurrent tests     

H. D. Fischer   《Nuclear Engineering and Design》2003,222(1):955-88

In this paper analytic formulae are derived to estimate conservatively the unavailability of a two out of four digital safety Instrumentation and Control (I&C) system with recurrent tests. The analytic formulae disclose the influence of the different parameters on the system’s unavailability. In particular, the choice of a proper test interval is essential to guarantee the required low unavailability. The extraordinary self-checking capabilities of digital systems are taken into account by use of an appropriate failure model together with the treatment of dependent failures of the integrated software–hardware system. The underlying methodology is approved by licensing experts of nuclear facilities in Germany.     

[首页] « 上一页 [6] [7] [8] [9] [10] 11 [12] [13] [14] [15] [16] 下一页 » 末  页»

Cat. numbers	Titles	Refs. in C.P.C.
ACQB	P SHELL CFP	1 (1969) 15
ACRN	A NEW D SHELL CFP	6 (1973) 88
AAGD	NJSYM	1 (1970) 241, 2 (1971) 173
AAGD0001	ADAPT NJSYM FOR WEIGHTS		2 (1971) 180
AAGD0002		ADAPT TO INTEGER ARITHMETIC	5 (1973) 161

Magnetic and nonmagnetic impurities in some A-15 structure systems. II. Magnetic properties

We present measurements of the susceptibility of the A-15 structure systems NbyPt_100–y–x M _x where M = Fe and Ru (y = 73–78). These measurements correlated with those of the critical temperature T _c permit us to conclude that there is a saturation of the effective number of magnetic impurity atoms and that these atoms are situated on the chains. We find also that the magnetic moment of the Fe atoms depend on the value of y. The high value of the Curie temperature and its variation is discussed with the aid of a model of pairs with antiferromagnetic interaction. In order to describe the formation of the localized moments we have taken into account the effect of the environment around each impurity. Depending on the number and the nature of the nearest neighboring atoms, we deduce a magnetic or nonmagnetic behavior of the impurity. The variation of the moment as a function of the nearest neighbors is explained by supposing electronic redistribution between the atoms, which is the same as supposing an interatomic charge transfer.     

Analysis of temperature-dependent optical gain in GaN-InGaN quantum-well structures

The temperature dependent spectral gain in InGaN-GaN multiple quantum-well structures with 10% In content is investigated. Mode gain is measured in a temperature range between 239 K and 312 K using the Hakki-Paoli technique and compared to simulations. The simulation accounts for temperature-dependent polarization dephasing, and hence homogeneous broadening, in a rigorous fashion, without any fit parameter. It is found that the evolution of the gain spectrum with temperature at different drive currents can be modeled using a temperature-independent single value for inhomogeneous broadening. The resulting compositional fluctuations are compared to structural measurements.     

A Study on the Buckling Behaviour of Strips and Plates with Residual Stresses

During and after rolling or flattening of metal strips and plates the permissible deviations from flatness are described by the permissible absolute wave height and the flatness index. Both values can be determined on a measuring table while the material is not subjected to global tension. Because this procedure is expensive, time‐consuming and allows measurement only at discrete positions along the strip length, on‐line flatness measuring systems are used which can detect the distribution of longitudinal tensile stresses distributed across the strip width allowing for the calculation of the flatness index. This value does not always agree with the value obtained directly by measuring on the table even when the measurement of the longitudinal tensile stress distribution operates perfectly. It can be shown that the measurement of the tensile stress distribution does not give a direct indication on the wave height in the tension‐free state determined on the measuring table. To explain the relationship between tensile stress distribution in the strip and the flatness measurement on the measuring table, the buckling behavior is analysed both with and without dead load for simple symmetrical residual stress distributions resulting, e.g., from the rolling process. Based on the knowledge of the distribution of the longitudinal residual stresses across the strip width, the flatness index and the wave height can be determined by using a specialized finite element model. If the direct measurement is performed under action of dead load, large differences between the directly and indirectly obtained flatness index are observed. Below a certain limit of the intensity of the residual stress distribution the strips and plates lie flat on the measuring table. Above this limit the strip lying on the table exhibits post‐bucking deformations. In the latter case, the wave height increases with strip thickness and intensity of residual stresses.     

A Comparative Study of the Use of Visual Communicative Signals in Interactions Between Dogs (Canis familiaris) and Humans and Cats (Felis catus) and Humans.

Dogs' (Canis familiaris) and cats' (Felis catus) interspecific communicative behavior toward humans was investigated. In Experiment 1, the ability of dogs and cats to use human pointing gestures in an object-choice task was compared using 4 types of pointing cues differing in distance between the signaled object and the end of the fingertip and in visibility duration of the given signal. Using these gestures, both dogs and cats were able to find the hidden food; there was no significant difference in their performance. In Experiment 2, the hidden food was made inaccessible to the subjects to determine whether they could indicate the place of the hidden food to a naive owner. Cats lacked some components of attention-getting behavior compared with dogs. The results suggest that individual familiarization with pointing gestures ensures high-level performance in the presence of such gestures; however, species-specific differences could cause differences in signaling toward the human. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Crack Tip Shielding or Anti-shielding due to Smooth and Discontinuous Material Inhomogeneities

This paper describes a theoretical model and related computational methods for examining the influence of inhomogeneous material properties on the crack driving force in elastic and elastic-plastic materials. Following the configurational forces approach, the crack tip shielding or anti-shielding due to smooth (e.g. graded layer) and discontinuous (e.g. bimaterial interface) distributions in material properties are derived. Computational post-processing methods are described to evaluate these inhomogeneity effects. The utility of the theoretical model and computational methods is demonstrated by examining a bimaterial interface perpendicular to a crack in elastic and elastic-plastic compact tension specimens.     

Conservative availability analyses including dependent failures in redundant I&C-systems with recurrent tests

In this paper analytic formulae are derived to estimate conservatively the unavailability of a two out of four digital safety Instrumentation and Control (I&C) system with recurrent tests. The analytic formulae disclose the influence of the different parameters on the system’s unavailability. In particular, the choice of a proper test interval is essential to guarantee the required low unavailability. The extraordinary self-checking capabilities of digital systems are taken into account by use of an appropriate failure model together with the treatment of dependent failures of the integrated software–hardware system. The underlying methodology is approved by licensing experts of nuclear facilities in Germany.