Effect of aspect ratio on entropy generation in a rectangular cavity with differentially heated vertical walls

In the present study, entropy generation in rectangular cavities with the same area but different aspect ratios is numerically investigated. The vertical walls of the cavities are at different constant temperatures while the horizontal walls are adiabatic. Heat transfer between vertical walls occurs by laminar natural convection. Based on the obtained dimensionless velocity and temperature values, the distributions of local entropy generation due to heat transfer and fluid friction, the local Bejan number and local entropy generation number are determined and related maps are plotted. The variation of the total entropy generation and average Bejan number for the whole cavity volume at different aspect ratios for different values of the Rayleigh number and irreversibility distribution ratio are also evaluated. It is found that for a cavity with high value of Rayleigh number (i.e., Ra = 10⁵), the total entropy generation due to fluid friction and total entropy generation number increase with increasing aspect ratio, attain a maximum and then decrease. The present results are compared with reported solutions and excellent agreement is observed. The study is performed for 10² < Ra < 10⁵, 10^− 4 < ? < 10^− 2, and Pr = 0.7.     

A comprehensive study on neutronics of a lead–bismuth eutectic cooled accelerator-driven sub-critical system for long-lived fission product transmutation

The aim of this study is to investigate the high-level waste (HLW) transmutation and fissile breeding potentials of a lead–bismuth eutectic (LBE) cooled accelerator-driven system (ADS) for the various configurations (the target radius, R_T = 10–50 cm and the radial thickness of the sub-critical core, δ_SC = 50–80 cm) and for the various fuel compositions (the fuel volume fraction, VF_F = 10%, 12%, 15% and 20% and the fissile fraction, FF = 10–24%) under sub-critical condition. The long-lived fission products (LLFPs: ⁹⁹Tc, ¹²⁹I and ¹³⁵Cs nuclides) and the uranium mono carbide (UC) ceramic fuel are considered as the HLW and the fissile fuel, respectively. The neutronic calculations have been performed per the incident proton (1000 MeV) with the high-energy Monte Carlo code MCNPX in coupled neutron and proton mode using the LA150 library. The numerical results bring out that the case of R_T = 30 cm, δ_SC = 80 cm, VF_F = 10% and FF = 23% is the optimum configuration and fuel composition, from the energy gain point of view, and has a high neutronic performance for an effective LLFP transmutation and fissile breeding.     

Time-dependent Neutronic Analysis for High Level Waste Transmutation in a Fusion-driven Transmuter

This study presents time-dependent transmutations of high-level waste (HLW) including minor actinides (MAs) and long-lived fission products (LLFPs) in the fusion-driven transmuter (FDT) that is optimized in terms of the neutronic performance per fusion neutron in our previous study. Its blanket has two different transmutation zones (MA transmutation zone, TZ_MA, and LLFP transmutation zone, TZ_FP), located separately from each other. High burn-up pressured water reactor (PWR)-mixed oxide (MOX) spent fuel is used as HLW. The time-dependent transmutation analyses have been performed for an operation period (OP) of up to 10 years by 75% plant factor (η) under a first-wall neutron load (P) of 5 MW/m². The effective half-lives of the MA and LLFP nuclides can be shortened significantly in the considered FDT while substantial electricity is produced in situ along the OP.     

Bond strength and adaptation of pulp capping materials to dentin

This study evaluated the shear bond strength (SBS) and internal marginal adaptation of pulp‐capping materials to dentin. Flat occlusal deep dentin surfaces were produced and randomly assigned to two groups (sound or artificial caries‐affected dentin). The specimens in each group were assigned to one of seven subgroups according to the materials used: Biodentine, Theracal LC, Ultra‐Blend plus, Calcimol LC, ApaCal ART, EQUIA Forte, and Ionoseal. Buildups (3‐mm inner diameter and 2‐mm deep) were made over the dentin surfaces. The bonded specimens were tested under shear forces at a crosshead speed of 0.8 mm/min and fracture modes were determined using a stereomicroscope at 25× magnification. The materials were applied to the pulp floor of prepared Class I cavities and then the cavities were restored with composite resin. Restored molar teeth were subjected to 5,000 thermocycles and sectioned in a bucco–lingual direction. Resin replicas were made to determine the adaptation at the pulp floor with scanning electron microscopy. Significant differences were determined among both bond strengths and gap formations of the materials. EQUIA Forte applied to both dentin substrates had a significantly higher SBS than the other materials. The bond strength of each material was not influenced by the dentin condition. Biodentine (3.03%), EQUIA Forte (7.83%), and Theracal LC (13.37%) had lower gap formations compared to other materials but were not significantly different from each other.     

Plasma-modified multiwalled carbon nanotubes with polyaniline for glucose biosensor applications

Multiwalled carbon nanotube (MWCNT) was modified through plasma polymerization of aniline by applying different radio frequency (radio frequency (RF): 13.56?MHz) powers. The modified MWCNTs were investigated in terms of morphology, chemical structure, and thermal behaviors, indicating the formation of composites based on the surface modification of MWCNT with polyaniline (PANI). These composites were then used in amperometric glucose biosensor, which was constructed by immobilizing glucose oxidase on premodified Pt electrode with PANI/MWCNT composites. The biosensor based on the composite obtained under RF power of 60?W exhibited the high sensitivity of 54.91?µA mM^?1 cm^?2 to glucose.     

Removal of basic dyes from aqueous solutions using starch‐graft‐acrylic acid copolymers

Graft copolymerization of acrylic acid (AA) onto starch was carried out with ceric ammonium nitrate as initiator under nitrogen atmosphere. The grafting percentages (GP%) of starch‐graft‐AA (St‐gr‐AA) copolymers were determined. When the AA molar concentrations were 0.3 and 0.5 mol/L, GP% of St‐gr‐AA copolymers were 10.5% (St‐gr‐AA‐1) and 14% (St‐gr‐AA‐2), respectively. St‐gr‐AA copolymers have been used for the adsorption of basic dye (Safranine T) from aqueous solutions. Effects of various parameters such as treatment time, initial pH of the solution (pH = 2–6), initial dye concentration (50– 500 mg/L), and GP% of starch graft copolymers were investigated.Basic dye removal capacities of the copolymers increase along with the augment of initial concentration of the adsorbate, GP% of the copolymers, and pH. The adsorption capacities for St‐gr‐AA‐1 and St‐gr‐AA‐2 reach 116.5 and 204 mg/g, respectively. Equilibrium adsorption data were obtained and fitted very well to Freundlich model. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Competitive removal of heavy metal ions by cellulose graft copolymers

The effect of composition of graft chains of four types cellulose graft copolymers on the competitive removal of Pb²⁺, Cu²⁺, and Cd²⁺ ions from aqueous solution was investigated. The copolymers used were (1) cellulose‐g‐polyacrylic acid (cellulose‐g‐pAA) with grafting percentages of 7, 18, and 30%; (2) cellulose‐g‐p(AA–NMBA) prepared by grafting of AA onto cellulose in the presence of crosslinking agent of N,N′‐methylene bisacrylamide (NMBA); (3) cellulose‐g‐p(AA–AASO₃H) prepared by grafting of a monomer mixture of acrylic acid (AA) and 2‐acrylamido‐2‐methyl propane sulphonic acid (AASO₃H) containing 10% (in mole) AASO₃H; and (4) cellulose‐g‐pAASO₃H obtained by grafting of AASO₃H onto cellulose. The concentrations of ions which were kept constant at 4 mmol/L in an aqueous solution of pH 4.5 were equal. Metal ion removal capacities and removal percentages of the copolymers was determined. Metal ion removal capacity of cellulose‐g‐pAA did not change with the increase in grafting percentages of the copolymer and determined to be 0.27 mmol metal ion/g_copolymer. Although the metal removal rate of cellulose‐g‐p(AA–NMBA) copolymer was lower than that of cellulose‐g‐pAA, removal capacities of both copolymers were the same which was equal to 0.24 mmol metal ion/g_copolymer. Cellulose did not remove any ion under the same conditions. In addition, cellulose‐g‐pAASO₃H removed practically no ion from the aqueous solution (0.02 mmol metal ion/g_copolymer). The presence of AASO₃H in the graft chains of cellulose‐g‐p(AA–AASO₃H) created a synergistic effect with respect to metal removal and led to a slight increase in metal ion adsorption capability in comparison to that of cellulose‐g‐pAA. All types of cellulose copolymers were found to be selective for the removal of Pb²⁺ over Cu²⁺ and Cd²⁺. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2034–2039, 2003     

Higher order operator splitting methods via Zassenhaus product formula: Theory and applications

In this paper, we contribute higher order operator splitting methods improved by Zassenhaus product. We apply the contribution to classical and iterative splitting methods. The underlying analysis to obtain higher order operator splitting methods is presented. While applying the methods to partial differential equations, the benefits of balancing time and spatial scales are discussed to accelerate the methods.The verification of the improved splitting methods are done with numerical examples. An individual handling of each operator with adapted standard higher order time-integrators is discussed. Finally, we conclude the higher order operator splitting methods.     

Learning from abstract and contextualized representations: The effect of verbal guidance

An experiment examined the effects of providing explicit verbal guidance to learners in integrating information with abstract or contextualized representations during computer-based learning of engineering. Verbal guidance supported learners in identifying correspondences and making mental connections among multiple textual and diagrammatic representations. Results from a 2 (abstract (A) or contextualized (C) representation) × 2 (no guidance or guidance) design showed that without guidance, abstract representations led to better transfer than contextualized representations. Moreover, learners in the contextualized representation group benefitted from the guidance, while the abstract representation group did not benefit from guidance. These findings suggest that abstract representations promote the development of deep, transferrable knowledge and that verbal guidance denoting correspondences among representations can facilitate learning when less effective representational formats are utilized.