Design of a 3D aligned myocardial tissue construct from biodegradable polyesters

The heart does not regenerate new functional tissue when myocardium dies following coronary artery occlusion, or if it is defective. Ventricular restoration involves excising the infarct and replacing it with a cardiac patch to restore the heart to a more healthy condition. The goal of this study was to design and develop a clinically applicable myocardial patch to replace myocardial infarcts and improve long-term heart function. A basic design composed of 3D microfibrous mats that house mesenchymal stem cells (MSCs) was developed from human umbilical cord matrix (Wharton’s Jelly) cells aligned in parallel to each other mimicking the native myocardium. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), poly(L-D,L-lactic acid) (P(L-D,L)LA) and poly(glycerol sebacate) (PGS) were blended and electrospun into aligned fiber mats with fiber diameter ranging between 1.10 and 1.25 μm. The micron-sized parallel fibers of the polymer blend were effective in cell alignment and cells have penetrated deep within the mat through the fiber interstices, occupying the whole structure; 8–9 cell layers were obtained. Biodegradable macroporous tubings were introduced to serve as nutrient delivery route. It was possible to create a thick myocardial patch with structure similar to the native tissue and with a capability to grow.     

Migration behavior of landfill leachate contaminants through alternative composite liners

Four identical pilot-scale landfill reactors with different alternative composite liners were simultaneously operated for a period of about 540 days to investigate and to simulate the migration behaviors of phenolic compounds (phenol, 2-CP, 2-MP, 3-MP, 4-MP, 2-NP, 4-NP, 2,4-DNP, 2,4-DCP, 2,6-DCP, 2,4,5-TCP, 2,4,6-TCP, 2,3,4,6-TeCP, PCP) and heavy metals (Pb, Cu, Zn, Cr, Cd, Ni) from landfill leachate to the groundwater. Alternative landfill liners of four reactors consist of R1: Compacted clay liner (10 cm + 10 cm, k = 10⁻⁸ m/sn), R2: Geomembrane (2 mm HDPE) + compacted clay liner (10 cm + 10 cm, k = 10⁻⁸ m/sn), R3: Geomembrane (2 mm HDPE) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn) + bentonite liner (2 cm) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn), and R4: Geomembrane (2 mm HDPE) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn) + zeolite liner (2 cm) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn). Wastes representing Istanbul municipal solid wastes were disposed in the reactors. To represent bioreactor landfills, reactors were operated by leachate recirculation. To monitor and control anaerobic degradation in the reactors, variations of conventional parameters (pH, alkalinity, chloride, conductivity, COD, TOC, TKN, ammonia and alcaly metals) were also investigated in landfill leachate samples. The results of this study showed that about 35-50% of migration of organic contaminants (phenolic compounds) and 55-100% of migration of inorganic contaminants (heavy metals) to the model groundwater could be effectively reduced with the use of bentonite and zeolite materials in landfill liner systems. Although leachate contaminants can reach to the groundwater in trace concentrations, findings of this study concluded that the release of these compounds from landfill leachate to the groundwater may potentially be of an important environmental concern based on the experimental findings.     

Special issue on microscopic image processing

The applications of biometric technology for automated personal identification become ubiquitous. Iris recognition is well known for high accuracy and reliability among the biometric traits. This paper presents an efficient noise-removing approach for non-cooperative iris recognition systems. Proposed method removed the noise factors including eyelids, eyelashes, reflections, out of framework, pupil and sclera. The novelty is to detect eyelashes and reflections through finding appropriate thresholds using a procedure called statistical decision making. The eyelids are detected using parabolic Hough transform in normalized iris image to increase computational speed. In addition, a coarse-to-fine strategy for accurate and fast iris localization is proposed. The Gabor-wavelet and a novel encoding strategy proposed in our previous work are also used here to generate the iris codes. We elaborate the principle of mask code generation to assign noisy bits in an iris code to exclude them in matching step. Experimental results on CASIA-IrisV3-Interval database show superiority of the proposed scheme among other state-of-the-art methods available in the literature.     

The effect of Sn concentration on some physical properties of zinc oxide films prepared by ultrasonic spray pyrolysis

The effect of Sn concentration on zinc oxide (ZnO) film properties has been investigated by depositing films with various Sn concentrations in the solution (Sn/Sn + Zn ratio from 0 to 50 at%) at a substrate temperature of 350°C by ultrasonic spray pyrolysis (USP) technique. The deposited films were characterized for their electrical, structural, morphological and elemental properties using current-voltage and conductivity-temperature measurements, X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectroscopy. Electrical investigations showed that the resistivity of ZnO films decreases for lower Sn concentration (at 10%) and then increases for higher Sn concentration (at 30–50%). Also, depending on the increasing Sn concentration, energies of donor-like traps for ZnO films decreased and activation energy of donors for ZnO films increased. The XRD patterns showed that the as-deposited films have polycrystalline structure and the crystalline nature of the films was deteriorated with increasing Sn concentration and a shift to amorphous structure was seen. The effect of Sn concentration was to increase the surface roughening and change considerably the morphologies of ZnO films. The most homogenous surface was seen in ZnO films. EDS results showed that all elements in the starting solutions were in the solid films and Zn element is more dominant than Sn on the surfaces. After all investigations, it was determined that Sn incorporation dramatically modifies the properties of ZnO films. ZnO and ZnO:Sn (10 at%) films have a low resistivity and high transparency in the visible range and may be used as window material and antireflecting coating in solar cells while the other films may be used in gas sensors where high conductivity is unnecessary.     

Estimation of limit angle using laminated displacement discontinuity analysis in the Soma coal field, Western Turkey

Determination of the limit angle at the Manisa-Soma-Eynez coal field, a major coal production area in Turkey, is difficult because of the presence of a landslide caused by the waste from a neighboring open-pit site being dumped over the underground mine at the Soma-Eynez basin. In fact, it is not possible to determine the effect of extraction on the surface from field studies. Thus, in order to determine the limit angle, in-situ subsidence measurements, geophysical measurements, rock-based tests in the laboratory and the data obtained from a physical model have supported numerical modeling studies. The software, LAMODEL, used for the numerical modeling was developed by National Institute for Occupational Safety and Health (NIOSH), and is based on the Boundary Element Method. The results obtained from modeling have been found to be compatible with other studies and as a result the limit angle has been determined.     

Growth and Characterization of Zn-Incorporated Copper Oxide Films

In this work, undoped and Zn-doped copper oxide films were deposited on glass substrates at a substrate temperature of 250 ± 5°C by using an ultrasonic spray pyrolysis technique. Electrical, optical, and structural properties of the films were investigated, and the effect of Zn incorporation on these properties are presented. The variations of electrical conductivities and electrical conduction mechanisms of all films were investigated in the dark and in the light. Optical properties of the produced films were analyzed by transmission, linear absorption coefficient, and reflection spectra. The band gaps of the films were determined by an optical method. The film structures were studied by x-ray diffraction. To obtain information about structural properties in detail, the grain size (D), dislocation density (δ), and lattice parameters for preferential orientations were calculated. The elemental analyses were performed using energy-dispersive x-ray spectroscopy. It was concluded that Zn has a strong effect, especially on the electrical and structural properties, and the undoped and Zn-doped copper oxide (at 3%) films may be used as absorbing layers in solar cells due to their low resistivities and suitable linear absorption coefficient values.     

Removal of basic dyes from aqueous solutions by crosslinked‐acrylic acid/acrylamidopropane sulfonic acid hydrogels

In this study, Acrylic acid (AA)/2‐acrylamido‐2‐methlypropane sulfonic acid (AMPS) hydrogels were prepared by free radical polymerization in aqueous solutions of AA, AMPS, and N,N‐methylenebisacrylamide (NMBA) as crosslinker. Potassium persulfate (PPS)/potassium bisulfide (PBS) were used as initiator and accelerator pair. The water absorption capacities and dye adsorption properties of the hydrogels were investigated. Adsorption properties of the hydrogels were evaluated by depending on different adsorption conditions such as different initial dye concentration and contact time. The concentrations of the dyes were determined using UV/Vis Spectrophotometer at wavelength 530 nm for safranine T (ST) and 622 nm for brilliant cresyl blue (BCB). Adsorption kinetic studies showed that pseudo‐first order kinetic model is suitable to explain the adsorption kinetic data of the hydrogels. Langmuir and Freundlich isotherm models were used to describe adsorption data. The result revealed that the adsorption of basic dyes onto hydrogels fit very well both Langmuir and Freundlich isotherms. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effects of infills on high‐rise buildings: a case study

In this study, the effects of infill walls to the response of a selected building under earthquake loading were investigated. Although various suggestions have been offered, designers usually neglect the effect of infill walls on building behaviour when designing a building. In this study, the effects of infill walls on a building, which consists of two storeys of basement, one storey of ground floor, one storey of mezzanine floor and 10 storeys of flats, were investigated. Three‐dimensional models of the building with and without infill walls were modelled in SAP2000. Then, nonlinear time history analysis was performed on the models with and without infill walls. Infill walls were modelled both as mass and structural elements. The results of two analyses were compared. Consequently, the effect of infill walls on the behaviour of buildings such as period, maximum roof displacement, base columns end‐forces and soft‐storey formation coefficient was determined. Addition of infill wall to the structures caused changes in maximum roof displacement, modal periods, maximum base column end‐forces, shear force and soft‐storey formation coefficient. Copyright © 2008 John Wiley & Sons, Ltd.     

The fuzzy logic-based modeling of a micro-scale sloped solar chimney power plant

Journal of Mechanical Science and Technology - The energy demand of world is increasing worldwide because of increasing population and developing technology. The use of environmentally friendly...