Electrostatic sprays of food-grade acids and plant extracts are more effective than conventional sprays in decontaminating Salmonella Typhimurium on spinach

About 40000 people fall victim to Salmonella infections every year in the United States. Recent occurrences of Salmonella contaminated spinach and its recalls have accelerated the need for efficient antimicrobials targeting these pathogens. Our study was aimed at evaluating the inhibitory properties of malic, tartaric, and lactic acids, and grape seed extract (GSE) alone and in combinations and their application methods against Salmonella Typhimurium-inoculated spinach using a response surface method. Fresh spinach leaves were washed, disinfected with sodium hypochlorite solution (0.04% v/v), rewashed with sterile deionized (DI) water, and inoculated with a 2nd-day culture of S. Typhimurium (7.0 log CFU/mL). Adhered S. Typhimurium population on day 0 were 7.5 log CFU/g. These were treated with individual and combinations of organic acids with GSE or DI water (control) adjusted to the same pH as that of the test solutions with both the modes of application and leaves were refrigerated at 4 °C. Malic acid (2%) in combination with GSE (3%) or lactic acid (3%) sprayed electrostatically showed reductions of 2.6 to 3.3 log CFU/g compared to lower log reductions (0.0 to 0.3 log CFU/g) by day 14 if sprayed conventionally. These findings indicate that malic acid in combination with GSE/lactic acid solutions applied by electrostatic spraying exhibited higher inhibition of pathogens than conventional spraying and can be used for commercial applications to enhance food safety.     

Dynamics of arsenic in agricultural soils irrigated with arsenic contaminated groundwater in Bangladesh

Arsenic (As) concentrations in the soil layers of 12 rice fields located in four As affected areas and two unaffected areas in Bangladesh were monitored during 2003. In the unaffected areas, where irrigation water contained little As (<1 microg/L), As concentrations of rice field soils ranged from 1.5 to 3.0 mg/kg and did not vary significantly with either depth or sampling time throughout the irrigation period. In the As affected areas where the irrigation water contained elevated As (79 to 436 microg/L), As concentrations of rice field soils were much higher compared to those in the unaffected areas and varied significantly with both depth and sampling time. For the top 0 to 150 mm of the soil, the As concentration increased significantly at the end of the irrigation season (May-June 2003). About 71% of the As that is applied to the rice field with irrigation water accumulates in the top 0 to 75 mm soil layer by the end of the irrigation season. After the wet season during which the rice fields were inundated with flood/rain water, the As concentrations in the soil layer decreased significantly and were reduced to levels comparable to those found in soil samples collected at the beginning of the irrigation period. The long-term As accumulation in agricultural soil appears to be counteracted by biogeochemical pathways leading to As removal from soil.     

Hands‐On CFD Educational Interface for Engineering Courses and Laboratories

This study describes the development, implementation, and evaluation of an effective curriculum for students to learn computational fluid dynamics (CFD) in introductory and intermediate undergraduate and introductory graduate level courses/laboratories. The curriculum is designed for use at different universities with different courses/laboratories, learning objectives, applications, conditions, and exercise notes. The common objective is to teach students from novice to expert users who are well prepared for engineering practice. The study describes a CFD Educational Interface for hands‐on student experience, which mirrors actual engineering practice. The Educational Interface teaches CFD methodology and procedures through a step‐by‐step interactive implementation automating the CFD process. A hierarchical system of predefined active options facilitates use at introductory and intermediate levels, encouraging self‐learning, and eases transition to using industrial CFD codes. An independent evaluation documents successful learning outcomes and confirms the effectiveness of the interface for students in introductory and intermediate fluid mechanics courses.     

Is Barrett's esophagus characterized by more pronounced acid reflux than severe esophagitis?

OBJECTIVE: Barrett's esophagus is related to gastroesophageal reflux disease (GERD). However, only a small fraction of patients with GERD develop Barrett's esophagus. We evaluated whether gastroesophageal acid reflux is more pronounced in Barrett's patients than in patients with moderate or severe endoscopic esophagitis. METHODS: Retrospective evaluation of results of esophageal manometry and 24 hour ambulatory pH monitoring performed between 1990 and 1996 at the Leiden University Medical Center in those patients who also underwent endoscopy < or = 3 months before pH-metry. Included were 51 patients with Barrett's esophagus, 30 patients with severe esophagitis, 45 patients with moderate esophagitis, and 24 healthy control subjects. RESULTS: Patients with Barrett's esophagus had significantly increased acid reflux time (p < 0.01-0.05) compared to patients with moderate, but not compared to patients with severe esophagitis. Distal esophageal body motility and LES pressure were significantly (p < 0.01-0.05) reduced in patients with Barrett's esophagus compared to patients with moderate esophagitis but not compared to those with severe esophagitis. CONCLUSION: Although acid reflux is increased in patients with Barrett's esophagus and esophageal motility is impaired, other factors apart from acid exposure and motility contribute to the development of Barrett's esophagus.     

Use of a Molecular Switch Probe to Activate or Inhibit GIRK1 Heteromers In Silico Reveals a Novel Gating Mechanism

G protein-gated inwardly rectifying K⁺ (GIRK) channels form highly active heterotetramers in the body, such as in neurons (GIRK1/GIRK2 or GIRK1/2) and heart (GIRK1/GIRK4 or GIRK1/4). Based on three-dimensional atomic resolution structures for GIRK2 homotetramers, we built heterotetrameric GIRK1/2 and GIRK1/4 models in a lipid bilayer environment. By employing a urea-based activator ML297 and its molecular switch, the inhibitor GAT1587, we captured channel gating transitions and K⁺ ion permeation in sub-microsecond molecular dynamics (MD) simulations. This allowed us to monitor the dynamics of the two channel gates (one transmembrane and one cytosolic) as well as their control by the required phosphatidylinositol bis 4-5-phosphate (PIP₂). By comparing differences in the two trajectories, we identify three hydrophobic residues in the transmembrane domain 1 (TM1) of GIRK1, namely, F87, Y91, and W95, which form a hydrophobic wire induced by ML297 and de-induced by GAT1587 to orchestrate channel gating. This includes bending of the TM2 and alignment of a dipole of two acidic GIRK1 residues (E141 and D173) in the permeation pathway to facilitate K⁺ ion conduction. Moreover, the TM movements drive the movement of the Slide Helix relative to TM1 to adjust interactions of the CD-loop that controls the gating of the cytosolic gate. The simulations reveal that a key basic residue that coordinates PIP₂ to stabilize the pre-open and open states of the transmembrane gate flips in the inhibited state to form a direct salt-bridge interaction with the cytosolic gate and destabilize its open state.     

Impacts of electrification & automation of public bus transportation on sustainability—A case study in Singapore

Forschung im Ingenieurwesen - Electrification and automation are attracting interest from the public-transportation sector for their potential to improve energy efficiency, cost efficiency, and...     

Large-scale synthesis of centrifugally spun tantalum oxynitride fiber electrocatalysts for hydrogen evolution reaction

Tantalum oxynitride (TaO_xN_1−x) fibers were synthesized and evaluated for their electrocatalytic hydrogen activity using an in-house developed centrifugal spinning setup. By tailoring the composition of the spinning solution and optimizing collector distance and rotation speed of the spinneret, bead-free TaO_xN_1−x fibers with a diameter of 800 nm were obtained. The fibers were structurally characterized through phase and elemental analysis, confirming the formation of monoclinic TaO_xN_1−x with clear splitting of the X-ray photoelectron spectroscopy peaks indicating Ta was in +5 oxidation state. The resulting oxynitride fibers exhibited superior electrocatalytic performance with low overpotentials (250 mV) to generate 10 mA/cm² compared to Ta₂O₅ oxide fibers. Interestingly, the enhanced activity of oxynitride fibers was observed to be suppressed in basic medium due to the high oxophilicity of tantalum ions and a negative Gibbs adsorption-free energy, leading to poisoning of the active sites. This work demonstrates a facile pathway for the fabrication of high-performance electrocatalysts, based on TaO_xN_1−x fibers, from a cost-effective and energy-efficient centrifugal spinning technique.     

Algorithm selection for SMT

International Journal on Software Tools for Technology Transfer - This paper presents MachSMT, an algorithm selection tool for Satisfiability Modulo Theories (SMT) solvers. MachSMT supports the...     

Inhibiting Erastin-Induced Ferroptotic Cell Death by Purine-Based Chelators

Ferroptosis is a cell death event caused by increased lipid peroxidation leading to iron-dependent oxidative stress and is associated with a wide variety of diseases. In recent years, ferroptosis inhibition has emerged as a novel strategy to target different pathologies. Here, we report the synthesis of two purine derivatives, 1 and 2 , for iron chelation strategy and evaluate their potency to inhibit erastin-induced ferroptosis. Both compounds showed efficient iron chelation in solution as well as in cellular environment. The crystal structure of the purine derivatives with iron demonstrated a 2 : 1 (ligand to metal center) stoichiometry for iron and purine derivative complexation. The synthesized compounds also decrease the reactive oxygen species concentration in cell cultures. Compound 2 showed better potency towards the prevention of ferroptotic cell death as compared to commercially available iron chelator in the erastin-induced ferroptosis cell culture model. Such purine analogues are potential functional scaffolds for the development of target molecules for ferroptosis inhibition.     

Fabrication of CeO2 microspheres by internal gelation process using flow-focusing droplet generator

Sphere-pac fuel is an alternative nuclear fuel technology in which microspheres of two or more sizes are utilized to fill the cladding tube in place of the more conventional single-size fuel pellets. This provides leeway for adjusting the fuel pellet packing density and resulting cladding tube porosity. The current investigation makes use of a flow-focusing droplet generator made from stainless steel (S.S.) 316 L, with a channel internal diameter (I.D.) of 0.5, 0.8, 1, and 3 mm. These microspheres were supposed to be of actinide oxide but here, cerium has been chosen as a surrogate of plutonium. Detailed information about the flow-focusing droplet generator, internal gelation process, and sphere-pac fuel has been provided. The size and size distribution of ceria microspheres were investigated by varying the flow rates of the continuous and dispersed phase. The characterization of ceria microspheres has been conducted using techniques such as scanning electron microscope (SEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and Brunauer–Emmett–Teller (BET) analyses. The size of prepared monodisperse microspheres was controlled precisely (within ±2%) in the range of 498–2888 μm using four S.S. 316 L flow-focusing droplet generators with channel I.D. 0.5, 0.8, 1, and 3 mm, respectively, and the coefficient of variation of the size distribution was found to be less than 2%.