微孔发泡过程中聚合物/超临界CO2均相体系形成的研究

阐述以超临界CO2为发泡剂的微孔发泡中均相体系的形成过程，研究聚合物熔体和气体的混合机理，并分析影响均相体系形成过程的因素。结果表明，聚合物和气体本身的结构和性质、工艺条件、加工设备、外力场等均影响均相体系的形成，振动力场的引入可以提高多相体系的混合程度，在聚合物／气体均相体系的形成过程中引入振动力场是一个全新的研究方向。     

用于文本分类的特征项权重算法改进

TF-IDF算法是文本分类中一种常用的权重计算方法,但是TF-IDF仅仅考虑了特征项在文本中出现的次数以及该特征项在训练集中的出现频率,没有考虑特征项在各个类间的分布情况及特征项的语义信息。因此针对TF-IDF的不足提出了一种改进的TF-IDF算法,此算法既考虑了特征项在类内的分布情况又考虑了特征项的位置及长度等语义因素,能更好地反映特征项的重要性。用朴素贝叶斯分类器验证其有效性,实验结果表明该算法优于TF-IDF算法,能较好地提高文本分类的准确率。     

基于Web的情报信息系统的设计与实现

由于传统的公安工作缺乏技术平台支撑,在领导层决策分析时,需要进行大量手工统计,不仅工作量大而且分析过程缓慢,无法准确及时地指导工作,因此文中设计并实现了适用于公安部门的情报信息系统。以Internet中的Web服务器和Web浏览器设计为基础,介绍所开发的基于Web的情报信息系统,对其总体框架结构、主要功能等内容进行探讨和研究,构建了相应的设计资源库,并分析了实现该系统的一些关键技术。该系统的研发成功,使得公安部门能有效地实现数据资源的合理配置和利用,为公安部门提供了一个先进、实用、高效、成熟可靠的工作系统。     

氯化锂－水吸附式再循环型空调制冷系统性能研究

对氯化锂－水吸附式空调系统在再循环运行方式下的性能进行了模拟。分析了再生温度、热交换器效率及蒸发冷却器效率对性能的影响。与开式通风型空调制冷系统的制冷性能相比，再循环型空调制冷系统的制冷能力较大，但性能系数ＣＯＰ较小     

二氧六环在CA低压反渗透膜中的作用机理

在低压醋酸纤维素一丙酮－甲酰胺反渗船舶这膜铸膜液体体系中，加入二氧六环使膜具有较小的初始平均孔径和较窄的孔径分布，二氧六环起到了调节高分子网络尺寸变小和均一化的作用。在１．０ＭＰａ下进料液浓度为１０００ｍｇ／Ｌ时，膜对Ｎａ２ＳＯ４、ＭＧＳＯ４分离率〉９６％，对ＮａＣｌ为８０％，Ｃ（ＮＯ２）２为８０％，ＭｇＣｌ２为７９％。平均透水率〉１．２５ｍｌ／ｃｍ＾２．ｈ适用于中低盐度水的脱盐软化。     

Influence of epoxy resin on the morphological and rheological properties of PBT/ABS blends compatibilized by ASMA

Polybutylene terephthalate (PBT)/acrylonitrile–butadiene–styrene (ABS) copolymer blends compatibilized by a mixture of styrene–acrylonitrile–maleic anhydride (ASMA) copolymers and epoxy resin (EP) were prepared through melt reactive extrusion. The morphological, rheological, and mechanical properties of these blends were studied. The epoxy functional groups of EP can react with anhydride groups of ASMA and the PBT terminal groups (? OH and ? COOH) simultaneously, leading to the formation of ASMA–EP–PBT graft copolymers. Because of the effective compatibilization of these copolymers at the interface, finer dispersed phase morphologies were obtained. Compared with PBT/ABS/ASMA blends, the addition of EP induced a more stable molten phase structure, with increases of storage moduli, loss moduli, and dynamic viscosities. Results indicated that 1.5 wt% of the EP in the blends was most suited for the compatibilization. Impact properties of these blends were also investigated. POLYM. ENG. SCI., 47:1943–1950, 2007. © 2007 Society of Plastics Engineers     

福建三钢焦化废水处理工艺的改造

通过对福建三钢煤化工有限公司废水处理系统生物脱氮工艺的改造，使出水水质达到国家规定的一级排放标准。同时，对焦化废水处理工艺流程、设备及工艺参数等方面进行了调整和改进，为焦化废水生物脱氮工艺的设计和运行提供了借鉴。     

国内BOPP膜生产现状

介绍了国内BOPP薄膜和专用料的生产情况，并提出了建议。     

Integrated UV-based photo microreactor-distillation technology toward process intensification of continuous ultra-high-purity electronic-grade silicon tetrachloride manufacture

Ultra-high-purity silicon tetrachloride (SiCl₄) is demanded as an electronic-grade chemical to meet the stringent requirements of the rapidly developing semiconductor industry. The high requirement for ultra-high-purity SiCl₄ has created the need for a high-efficient process for reducing energy consumption as well as satisfying product quality. In this paper, a mass of production technology of ultra-high-purity SiCl₄ was successfully developed through chlorination reaction in the ultraviolet (UV)-based photo microreactor coupled with the distillation process. The influences of key operational parameters, including temperature, pressure, UV wavelength and light intensity on the product quality, especially for hydrogen-containing impurities, were quantified by the infrared transmittance of Fourier transform infrared spectroscopy (FT-IR) at 2185 cm^-1 and 2160 cm^-1 indicating that characteristic vibrational modes of Si—H bonds, as well as the operating conditions of distillation were also investigated as key factors for metal impurities removing. The advanced intensification of SiCl₄ manufactured by the integration of photo microreactor and distillation achieves the products with superior specifications higher than the standard commercial products.     

牛顿迭代法在求解物料平衡式中的应用

高炉数学模型是分析炉况、指导操作的有效工具.物料平衡是高炉生产遵循的基本理论,建立高炉数学模型中常需要建立物料平衡式计算相关数据.文章提出采用Newton迭代法来求解物料平衡式,并针对炉身模拟模型建立了物料平衡式并进行了求解.结果表明,Newton迭代法能够有效的求解物料平衡方程式,并具有易于软件实现,以及高效率、高精度的优点.