Rates of mass transfer to patch electrodes in disturbed flows using oxygen reduction under limiting current conditions

The cases of a sudden pipe expansion and a sudden pipe contraction are simulated within a flow loop-based test section designed to approximate disturbed conduit flow. Mass transfer rates to patch electrodes at selected positions within the test section have been measured using a limiting current methodology applied to oxygen reduction at copper in 3.5% wt./vol. NaCl. Using both large-scale polarisation linear sweep voltammetry and a potential step current transient technique with hydrodynamic steps, absolute and relative rates of oxygen mass transfer have been examined as a function of Reynolds number and location within the test section. The highest rates of oxygen transfer were observed both within the high velocity area of the test section and close to known regions of flow disturbance. Under the flow conditions used, patch electrode mass transfer relates to wall shear stress, which allowed areas of high mean and high fluctuating wall shear stress to be identified.     

Problem-Based Learning Approach to Construction Management Teaching

This paper describes construction management teaching for the Master of Engineering in civil engineering course at the University of Glasgow in the United Kingdom. This course is a 5-yr undergraduate degree accredited by the Institution of Civil Engineers for membership in the Institution subject to graduates satisfying the appropriate postgraduate training objectives. Construction management teaching takes place in the third, fourth, and fifth years of the degree and is structured to make effective use of both traditional and problem-based learning teaching methods. Examples are given of two problem-based learning courses used in the fourth and fifth year of the degree course. Both are based on complex construction projects and provide students with the opportunity to apply and synthesis knowledge gained on the traditionally taught third year course. Formal feedback from students and informal feedback from local industry suggests that the courses are meeting their overall objective of producing graduates with relevant knowledge and skills in construction management.     

Comparison of 10,11‐Dehydrocurvularin Polyketide Synthases from Alternaria cinerariae and Aspergillus terreus Highlights Key Structural Motifs

Iterative type I polyketide synthases (PKSs) from fungi are multifunctional enzymes that use their active sites repeatedly in a highly ordered sequence to assemble complex natural products. A phytotoxic macrolide with anticancer properties, 10,11‐dehydrocurvularin (DHC), is produced by cooperation of a highly reducing (HR) iterative PKS and a non‐reducing (NR) iterative PKS. We have identified the DHC gene cluster in Alternaria cinerariae, heterologously expressed the active HR PKS (Dhc3) and NR PKS (Dhc5) in yeast, and compared them to corresponding proteins that make DHC in Aspergillus terreus. Phylogenetic analysis and homology modeling of these enzymes identified variable surfaces and conserved motifs that are implicated in product formation.     

Production of pharmaceuticals: Amines from alcohols in a continuous flow fixed bed catalytic reactor

This paper reports the use of an immobilised ruthenium complex in a continuous flow process for the N-alkylation of morpholine with benzyl alcohol. The ruthenium-based catalyst was supported on a phosphine bound polymer. Screening experiments were first performed in a batch reactor, with a 16 vol% mixture of morpholine and benzyl alcohol (stoichiometric molar ratio of 1:1) in toluene as the solvent. Operating at 110 °C for 24 h, it was shown that high conversions (>99%) into the desired tertiary amine could be achieved. This reaction was then shown to be viable in a continuous flow reactor, where the catalytic polymer beads were retained in the bed. Operating at 150 °C and using p-xylene as a solvent, the conversion into the desired tertiary amine was shown to be as high as 98%. This approach is clearly very promising, as it provides a greener and more atom efficient route for the production of secondary and tertiary amines in the pharmaceutical industry.     

Are toxicological responses in laboratory (inbred) zebrafish representative of those in outbred (wild) populations? - A case study with an endocrine disrupting chemical

Laboratory animals tend to be more inbred and less genetically diverse than wild populations, and thus may differ in their susceptibility to chemical stressors. We tested this hypothesis by comparing the responses of related inbred (theoretical inbreeding F(IT) = n + 0.25) and outbred (F(IT) = n) zebrafish (Danio rerio) WIK/Wild family lines to an endocrine disrupting chemical, clotrimazole. Exposure of inbred and outbred zebrafish to 2.9 μg clotrimazole/L had no effect on survival, growth, or gonadal development. Exposure of both lines to 43.7 μg clotrimazole/L led to male-biased sex ratios compared with controls (87% versus 55% and 92% vs 64%, for inbred and outbred males, respectively), advanced germ cell development, and reduced plasma 11-ketotestosterone concentrations in males. However, outbred males (but not inbred males) developed testis that were more than twice the weight of controls, which corresponded with a proliferation of Leydig cells and maintenance of the expression (rather than down-regulation occurring in inbreds) of gonadal aromatase (cyp19a1a) and insulin-like growth factor (igf1). Our results illustrate that the effects of an endocrine disrupting chemical (clotrimazole) on some end points (here testis development) can differ between inbred and outbred zebrafish. This highlights the need for reporting pedigree/genetic information and consistency in the responses of laboratory animals (e.g., by using model compounds as positive controls).     

印后加工从手动到自动控制

满足印刷周期越来越快和印数越来越少的需要超出了印刷机要易于设定和转换的范围。如果印后领域不能做出改变以保持与印前和印刷部门的发展齐头并进的话，制作印版以及接下来从印刷机印出印张就会有些小问题。机械上的新点子改变了机器设计的方式，信息技术的进步将订书机、装订机、折页机联接到数据网络里，自动化设定和控制台控制可进行远程管理，尽可能减轻操作人员的负担。     

在MicroBlaze上创建机器人弹奏手

本文利 Spartan-3A入门套件,在开发MicroBlaze子系统的基础上,创建了一个能够弹奏管风琴的机器人.实际验证表明,电磁发热和音效都能达到令人满意的效果.     

A Stackable Bonding-Free Flextensional Piezoelectric Actuator

A flextensional actuator was designed using commercial multilayer stacked actuator so as to produce large displacements at intermediate force levels. The simple design chosen eliminated the need for bonding the actuators into the frame and permitted easy series connection of multiple units. To satisfy the need for a fiber grating tuning device to interrogate an array of Bragg grating fiber optic stress sensors, a tuning device using four series connected units was constructed. The unit performs well, but the actual measured amplification is less than theoretical expectation. The problem was traced to unwanted flexing of the simple original frame and a hinged more robust flexing beam construction was shown to eliminate the problem.