Achievement of energy focus for distance-of-flight mass spectrometry with constant momentum acceleration and an ion mirror

Distance-of-flight mass spectrometry (DOF-MS) has not yet been implemented, though it has many potential advantages in a variety of applications. Impeding the implementation of DOF-MS is the development of the required array detectors and working out the equivalents to the focusing methods now used in time-of-flight (TOF) mass analyzers. Ideally, a batch of ions composed of a variety of m/z values, despite initial distributions of space and energy, would be spatially focused at their respective flight distances at the same time. First-order energy focusing, including ion turnaround, is shown to be accomplished by the use of an ion mirror in conjunction with constant momentum acceleration of the initial ion packet. The initial spatial dispersion is maintained throughout the flight path. With zero initial spatial ion spread, energy focusing to achieve resolutions in the tens of thousands is shown to be feasible with ions from the elemental and isotope ratio mass regions through the extremely high m/z range. With moderate spatial spread taken into account, the DOF-MS approach is shown to achieve resolutions competitive with quadrupole and ion trap mass analyzers. Advantages of DOF-MS include all the advantages of TOF-MS plus simpler detector electronics and the improved signal-to-noise ratio and dynamic range afforded by array detection.     

High-performance elastomeric nanocomposites via solvent-exchange processing

The incorporation of nanoparticles into engineering thermoplastics affords engineers an opportunity to synthesize polymer nanocomposites that potentially rival the most advanced materials in nature. Development of these materials is difficult because thermodynamic and kinetic barriers inhibit the dispersal of inorganic, often hydrophilic nanoparticles in hydrophobic polymer matrices. Using a new solvent-exchange approach, we preferentially reinforce the hard microdomains of thermoplastic elastomers with smectic clay of similar characteristic dimensions. The strong adhesion between the clay and the hard microdomains coupled with the formation of a percolative network not only stiffens and toughens, but increases the heat distortion temperature of the material and induces reversible thermotropic liquid-crystalline transitions. The discotic clay platelets induce morphological ordering over a range of length scales, which results in significant thermomechanical enhancement and expands high-temperature applications. Merging block-copolymer processing techniques with this method for preferential ordering of nanoparticle facilitates the development of new, hierarchically ordered materials.     

Surface modification of poly(vinyl chloride) using high intensity ultrasound

The use of high intensity ultrasound to promote a number of reactions at the surface of solid poly(vinyl chloride) is reported. Substitution reactions involving a range of compounds, including dyes, can rapidly be carried out from aqueous solution under labile conditions. Sonochemically enhanced treatment with strong aqueous base produces dehydrochlorination even at room temperature to produce a thin layer of conjugated material at the surface which can then be grafted with a number of compounds. Some speculation as to the mechanistic features of the process as well as its potential utility is made. © 1999 Society of Chemical Industry     

Inductively heated shape memory polymer for the magnetic actuation of medical devices

Presently, there is interest in making medical devices such as expandable stents and intravascular microactuators from shape memory polymer (SMP). One of the key challenges in realizing SMP medical devices is the implementation of a safe and effective method of thermally actuating various device geometries in vivo. A novel scheme of actuation by Curie-thermoregulated inductive heating is presented. Prototype medical devices made from SMP loaded with nickel zinc ferrite ferromagnetic particles were actuated in air by applying an alternating magnetic field to induce heating. Dynamic mechanical thermal analysis was performed on both the particle-loaded and neat SMP materials to assess the impact of the ferrite particles on the mechanical properties of the samples. Calorimetry was used to quantify the rate of heat generation as a function of particle size and volumetric loading of ferrite particles in the SMP. These tests demonstrated the feasibility of SMP actuation by inductive heating. Rapid and uniform heating was achieved in complex device geometries and particle loading up to 10% volume content did not interfere with the shape recovery of the SMP.     

Assessing fuel cell vehicle innovation and the role of policy in Japan,Korea, and China

Despite intensive public and private research efforts into developing fuel cell vehicles (FCV), the global number of FCV remains small and they are unavailable for commercial purchase. We use an in-depth literature review, and bibliometric and patent analysis to analyse FCV technology within the conceptual framework of Rogers' innovation diffusion curve and suggest how the particular innovation systems and policies adopted in three key Asian car-manufacturing countries (Japan, Korea, and China) have influenced the development of FCV. Such analysis may capture trends not indicated by technical measures such as increases in efficiency or decreases in unit cost. Although Japan continues to lead in terms of number of patents and quality of academic research, Korea and China have been successful in developing fuel cell programs. Korean academics patent more frequently than their Japanese and Chinese peers, producing 18% of FC patents, with 16% of those filed also naming a private company. The 2008 financial crisis and ongoing economic uncertainty appears to have had some effect on patent activity whilst academic research appears unaffected. Diffusion curve analysis suggests that FCVs have not reached technological maturity.     

Fluoroalkylated silicon-containing surfaces-estimation of solid-surface energy

The design of robust omniphobic surfaces, which are not wetted by low-surface-tension liquids such as octane (γlv=21.6 mN/m) and methanol (γlv=22.7 mN/m), requires an appropriately chosen surface micro/nanotexture in addition to a low solid-surface energy (γsv). 1H,1H,2H,2H-Heptadecafluorodecyl polyhedral oligomeric silsesquioxane (fluorodecyl POSS) offers one of the lowest solid-surface energy values ever reported (γsv≈10 mN/m) and has become the molecule of choice for coating textured surfaces. In this work, we synthesize and evaluate a series of related molecules that either retain the POSS cage and differ in fluoroalkyl chain length or that retain the fluorodecyl chains surrounding a linear or cyclic molecular structure. The solid-surface energy (γsv) of these molecules was estimated using contact angle measurements on flat spin-coated silicon wafer surfaces. Zisman analysis was performed using a homologous series of n-alkanes (15.5≤γlv≤27.5 mN/m), whereas Girifalco-Good analysis was performed using a set of polar and nonpolar liquids with a wider range of liquid surface tension (15.5≤γlv≤72.1 mN/m). The hydrogen-bond-donating, hydrogen-bond-accepting, polar, and nonpolar (dispersion) contributions to the solid-surface energy of each compound were determined by probing the surfaces using a set of three liquid droplets of either acetone, chloroform, and dodecane or diiodomethane, dimethyl sulfoxide, and water.     

Life cycle assessment of the transmission network in Great Britain

Analysis of lower carbon power systems has tended to focus on the operational carbon dioxide (CO₂) emissions from power stations. However, to achieve the large cuts required it is necessary to understand the whole-life contribution of all sectors of the electricity industry. Here, a preliminary assessment of the life cycle carbon emissions of the transmission network in Great Britain is presented. Using a 40-year period and assuming a static generation mix it shows that the carbon equivalent emissions (or global warming potential) of the transmission network are around 11 gCO_2-eq/kWh of electricity transmitted and that almost 19 times more energy is transmitted by the network than is used in its construction and operation. Operational emissions account for 96% of this with transmission losses alone totalling 85% and sulphur hexafluoride (SF₆) emissions featuring significantly. However, the CO₂ embodied within the raw materials of the network infrastructure itself represents a modest 3%. Transmission investment decisions informed by whole-life cycle carbon assessments of network design could balance higher financial and carbon ‘capital’ costs of larger conductors with lower transmission losses and CO₂ emissions over the network lifetime. This will, however, necessitate new regulatory approaches to properly incentivise transmission companies.     

软件质量对于数字世界的重要意义

新冠肺炎疫情加快了数字化转型的步伐,软件在我们的工作、生活和学习中发挥了至关重要的作用.全球的数字化程度越来越高,人们对于数字产品的依赖也与日俱增,这一切都让软件质量成为了大众所关注的焦点. 当下,数字化转型的速度没有放缓的迹象,而基于软件的创新和发展仍将持续.据信息与软件质量联盟统计,软件质量问题在2020年给美国经...     

Changes in rumen bacterial and archaeal communities over the transition period in primiparous Holstein dairy cows

In the present study, we hypothesized that the rumen bacterial and archaeal communities would change significantly over the transition period of dairy cows, mainly as an adaptation to the classical use of low-grain prepartum and high-grain postpartum diets. Bacterial 16S rRNA gene amplicon sequencing of rumen samples from 10 primiparous Holstein dairy cows revealed no changes over the transition period in relative abundance of genera such as Ruminococcus, Butyrivibrio, Clostridium, Coprococcus, and Pseudobutyrivibrio. However, other dominant genus-level taxa, such as Prevotella, unclassified Ruminococcaceae, and unclassified Succinivibrionaceae, showed distinct changes in relative abundance from the prepartum to the postpartum period. Overall, we observed individual fluctuation patterns over the transition period for a range of bacterial taxa that, in some cases, were correlated with observed changes in the rumen short-chain fatty acids profile. Combined results from clone library and terminal-restriction fragment length polymorphism (T-RFLP) analyses, targeting the methyl-coenzyme M reductase α-subunit (mcrA) gene, revealed a methanogenic archaeal community dominated by the Methanobacteriales and Methanomassiliicoccales orders, particularly the genera Methanobrevibacter, Methanosphaera, and Methanomassiliicoccus. As observed for the bacterial community, the T-RFLP patterns showed significant shifts in methanogenic community composition over the transition period. Together, the composition of the rumen bacterial and archaeal communities exhibited changes in response to particularly the dietary changes of dairy cows over the transition period.     

Fostering active network management through SMEs’ practises

Managing the electricity network through ‘smart grid’ systems is a key strategy to address challenges of energy security, low carbon transitions and the replacement of ageing infrastructure networks in the UK. Small and medium enterprises (SMEs) have a significant role in shaping patterns of energy consumption. Understanding how their activities interrelate with changes in electricity systems is critical for active network management. A significant challenge for the transformation of electricity systems involves comprehending the complexity that stems from the variety of commercial activities and diversity of social and organizational practises among SMEs that interact with material infrastructures. We engage with SMEs to consider how smart grid interventions ‘fit’ into everyday operational activities. Drawing on analysis of empirical data on electricity use, smart metre data, surveys, interviews and ‘energy tours’ with SMEs to understand lighting, space heating and cooling, refrigeration and IT use, this paper argues for experimenting with the use of practise theory as a framework for bringing together technical and social aspects of energy use in SMEs. This approach reveals that material circumstances and temporal factors shape current energy demand among SMEs, with ‘connectedness’ an emergent factor.