THE FLUOROMETRIC CHARACTERIZATION OF ASPHALTS

ABSTRACT

Fluorescence microphotometry has been used as a technique for the characterization of asphalt binder quality and the deterioration of asphalt cements. The technique employs optical microscopy for the in situ identification of asphalt binder from aggregate materials in cements, thereby eliminating the need to solvent extract the binder for evaluation. It may also obviate the possibility of solvent interaction or interference with the physical and chemical properties of asphalt binders that have developed in-service.

In this research effort a standard technique for the measurement of fluorescence intensity has been developed and applied to the characterization of twelve raw asphalts. These studies were first necessary before undertaking the more difficult task of measuring asphalt binder fluorescence in cements. Analytical techniques and some of the factors which influence asphalt fluorescence have been considered. With this small sample set, relationships appear to be emerging between original asphalt viscosity as well as the viscosity of laboratory-aged asphalts and fluorescence intensity. As viscosity increases, intensity decreases, suggesting that quantitative fluorescence may be used as a measure of the molecular associations that result during asphalt hardening     

Optimizing the performance of aerosol photoacoustic cells using a finite element model. Part 2: Application to a two-resonator cell

Abstract

Photoacoustic spectroscopy (PAS) measures aerosol absorption in a noncontact manner, providing accurate absorption measurements that are needed to improve aerosol optical property representations in climate models. Central to PAS is resonant amplification of the acoustic pressure wave generated from laser-heated aerosol transferring heat to surrounding gas by a photoacoustic cell. Although this cell amplifies pressure sources from aerosol absorption (signal), it also amplifies noise and background sources. It is important to maximize the cell signal-to-background ratio (SBR) for sensitive absorption measurements. Many researchers have adopted the two-resonator cell design described by Lack et al. (2006 Lack, D. A., E. R. Lovejoy, T. Baynard, A. Pettersson, and A. R. Ravishankara. 2006. Aerosol absorption measurement using photoacoustic spectroscopy: Sensitivity, calibration, and uncertainty developments. Aerosol Sci. Technol. 40 (9):697–708. doi: 10.1080/02786820600803917.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]). We show that the uncertainty in PAS measurements of aerosol absorption using this two-resonator cell is significantly degraded by its large sensitivity to background contributions from laser scattering and absorption at the cell windows. In Part 1, we described the use of a finite element method (FEM) to predict cell acoustic properties, validated this framework by comparing model predictions to measurements, and used FEM to test various strategies applied commonly to single-resonator cell optimization. In this second part, we apply FEM to understand the excitation of resonant modes of the two-resonator cell, with comparison measurements demonstrating accurate predictions of acoustic response. We perform geometry optimization studies to maximize the SBR and demonstrate that the laser–window interaction background is reduced to undetectable levels for an optimal cell. This optimized two-resonator cell will improve the sensitivity and accuracy of future aerosol absorption measurements.     

A novel flow battery—A lead-acid battery based on an electrolyte with soluble lead(II): V. Studies of the lead negative electrode

The structure of lead deposits (approximately 1 mm thick) formed in conditions likely to be met at the negative electrode during the charge/discharge cycling of a soluble lead-acid flow battery is examined. The quality of the lead deposit could be improved by appropriate additives and the preferred additive was shown to be the hexadecyltrimethylammonium cation, C₁₆H₃₃(CH₃)₃N⁺, at a concentration of 5 mM. In the presence of this additive, thick layers with acceptable uniformity could be formed over a range of current densities (20–80 mA cm⁻²) and solution compositions. While electrolyte compositions with lead(II) concentrations in the range 0.1–1.5 M and methanesulfonic acid concentrations in the range 0–2.4 M have been investigated, the best quality deposits are formed at lower concentrations of both species. Surprisingly, the acid concentration was more important than the lead(II) concentration; hence a possible initial electrolyte composition is 1.2 M Pb(II) + 5 mM C₁₆H₃₃(CH₃)₃N⁺ without added acid.     

Bioprocess engineering of microalgae to produce a variety of consumer products

Microalgae biotechnology has recently emerged into the lime light owing to numerous consumer products that can be harnessed from microalgae. Product portfolio stretches from straightforward biomass production for food and animal feed to valuable products extracted from microalgal biomass, including triglycerides which can be converted into biodiesel. For most of these applications, the production process is moderately economically viable and the market is developing. Considering the enormous biodiversity of microalgae and recent developments in genetic and metabolic engineering, this group of organisms represents one of the most promising sources for new products and applications. With the development of detailed culture and screening techniques, microalgal biotechnology can meet the high demands of food, energy and pharmaceutical industries. This review article discusses the technology and production platforms for development and creation of different valuable consumer products from microalgal biomass.     

Reply to comments on "Derivation of numerical values for the World Health Organization guidelines for recreational waters"

The contribution addressed reveals an optimistic design philosophy likely to systematically underestimate risk in epidemiologic studies into the health effects of bathing water exposures. The authors seem to recommend that data on the 'exposure' measure (i.e. water quality) in such studies should be acquired in a similar manner to that used for regulatory sampling. This approach may compromise the quality of the epidemiologic investigations undertaken. It may result in imprecise estimates of exposure because it ignores the fact that regulatory timescales and spatial resolution (even if artificially compressed to a bathing day) can mask large spatial and temporal variability in water quality. If this variability is ignored by taking some mean value and attributing that to all of those exposed in a period at a study location, many bathers may be misclassified and the studies may be biased to a 'no-effect' conclusion. A more appropriate approach is to maximise the precision of the epidemiologic investigations by measurement of individual exposure (or water quality) at the place and time of the exposure, as has been done in randomised volunteer studies in the UK and Germany. The precise epidemiologic relationships linking 'exposure' with 'illness' can then be related to the probability of exposure to particular water quality by a 'normal bather' using the known probability distribution of the exposure variable (i.e. faecal indicator concentration) in the regulated bathing waters. We suggest that any research protocol where poor sampling design for water quality assessment is justified because regulatory monitoring is equally imprecise may be fundamentally flawed. The rationale for this assessment is that the epidemiology is the starting point and evidence-base for 'standards'. If precision is not maximised at this stage in the process it compromises the credibility of the standards design process. The negative effects of the approach advocated in this 'comment' are illustrated using published research findings used to derive the figures illustrated in Wymer et al. [2005. Comment on derivation of numerical values for the World Health Organization guidelines for recreational waters. Water Research 39, 2774-2777].     

Using symbolic execution to guide test generation

Although a number of weaknesses of symbolic execution, when used for software testing, have been highlighted in the literature, the recent resurgence of strongly‐typed languages has created opportunities for re‐examining symbolic execution to determine whether these shortfalls can be overcome. This paper discusses symbolic execution in general and makes two contributions: (a) overcoming one of the key problems, analysing programs with indexed arrays; and (b) describing the incorporation of a symbolic execution module for test case generation into an integrated testing tool. For methods which index arrays, a new approach determines all the possible values of each array index, allowing the generation of equivalence classes for every possible combination of array element aliases. An incremental simplification approach, which converts path expressions to canonical forms in order to identify infeasible paths at the earliest opportunity and thus reduce the analysis time, is also described. Symbolic execution is most effective when included in an integrated test and analysis environment: a component test bench was built with a symbolic execution module integrated into it, providing a toolbox of software component test and code analysis methods aimed at programmers at all levels. Copyright © 2000 John Wiley & Sons, Ltd.     

Self-assembling structure formation in low-density magnetoactive polymers

The formation of microstructures in magnetoactive polymers (MAPs) is a recently discovered phenomenon found only with very low filler particle concentrations (less than 3 wt %). Due to the degassing process, filler particles collect around an ascending bubble, which dissolves at a certain point leaving particulate rings within the matrix. The formation of toroidal microstructures commences as filler concentration approaches 1 wt %. The development of coherent parallel aligned rings with a compact order continues as particle concentrations increase toward 2 wt %. Between 2 and 3 wt % capillary doublets develop, while mass percentages higher than 3% result in increasing entropy as the random order of particle agglomeration found in higher concentration MAP dominates. Self-structured samples of different filler material and concentrations between 1 and 3 wt % have been investigated using X-ray tomography, where the emerging structures can be observed and visualized. The ring structures resulting from this research represent microinductivities which can be fabricated in a targeted manner, thus enabling new applications in the high-frequency radio field. Furthermore, these anisotropic, but well-organized, structures have magnetic field-dependent implications for optical, thermal, acoustic, and medical applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48291.     

Prediction of thermoset viscosity using a thermomechanical analyzer

A thermomechanical analyzer (TMA) in the parallel-plate configuration was employed to study the viscosity behavior of an unfilled, FR-4 type epoxy resin by monitoring its thickness change with time under a constant compressive force at various temperatures. With a dual-Arrhenius reheology model, we were able to predict viscosities under nonisothermal conditions of high heating rate from more easily obtained isothermal viscosity data. Due to its simplicity and speed, this technique is well suited for investigating resin viscosity behavior during composite lamination in a manufacturing environment.