Physical gelation of crystallizing metallocene and Ziegler-Natta ethylene-hexene copolymers

The effect of molecular architecture on the evolution of viscoelastic properties during crystallization was investigated using ethylene-hexene copolymers manufactured via metallocene (M-LLDPE) and Ziegler-Natta (ZN-LLDPE) processes. Differences in branching distribution were shown to have a drastic effect on the viscoelastic properties near the gel point. It is shown that the branching distribution rather than branch content is the determining parameter for the evolution of the rheological properties during isothermal and non-isothermal crystallization, and for the width of the solidification interval. We developed a partial melting technique for the preparation of stable critical gels of LLDPE whose viscoelastic properties correspond to the intermediate state between melt and solid. Local molecular conformation and crystallinity in these gels were characterized by Raman spectroscopy, which shows that the transition from melt-like to solid-like rheological behavior (physical gelation) in LLDPE occurs at a very low overall crystallinity of less than 5%.     

Studies of water-soluble oligomers formed in emulsion copolymerization

A polymer chain transfer agent was synthesized by the reaction between poly(vinylbenzyl chloride) latex particles and 2-aminoethanethiol in a basic environment. In subsequent emulsion polymerization reactions, low molecular weight species were formed when waterborn oligomeric radicals diffused to the surface of these seed particles. These low molecular weight oligomers were separated by membrane filtration and their composition and molecular weight weight were analyzed by FTIR and mass spectroscopy. The measured composition results were compared with those that were calculated from the copolymerization equation. The molecular weights were compared with earlier experimental results that were obtained by isolation of oligomers formed when a water-soluble inhibitor was added to a reacting emulsion. Three seeded emulsion copolymerization systems, that is, styrene–acrylic acid, styrenemethacrylic acid, and styrene–methyl methacrylate, were investigated. The distribution of monomer in the water phase and in the copolymer particles was analyzed. The results show that the oligomer compositions for different copolymerization systems can be approximated reasonable well by the copolymerization equation, using the reactivity ratios obtained from bulk copolymerization. The length of the oligomer radicals formed depends on their composition and the properties of the polymer particles, such as surface charge, composition, size, and concentration. © 1994 John Wiley & Sons, Inc.     

Densification and Sintering Kinetics in Sintered Silicon Nitride

The sintering sequence of Y₂O₃-Al₂O₃-doped Si₃N₄ was investigated with respect to the relationship between densification, α→β transformation, and microstructural development. Quenching studies were performed to reveal these interactions during a complete sintering cycle. Isothermal studies were conducted to examine the sintering kinetics and compared to Kingery's liquid-phase sintering model. The bulk density increased to ≥90% of theoretical density with only minor transformation taking place. Major transformation occurred in a late sintering stage and was accompanied by the development of elongated grains. The kinetic order of the densification process, taking into account an appropriate correction, was larger than any of the rate exponents predicted by the Kingery model, indicating that other single or mixed mechanisms were active.     

Mechanical analysis of hollow fiber membrane integrity in water reuse applications

In order to gain insight into membrane fiber failure (i.e., loss of integrity), properties of five hollow fiber membranes and four hollow fiber modules were evaluated. Specifically, membrane material, membrane symmetry, fiber modulus of elasticity, fiber diameter and thickness, module potting technique, module flow pattern (inside-out or outside-in), and coliform breakthrough were investigated. The approach combined evaluation of the above properties with mathematical modeling of structure-fluid interactions to comprehensively evaluate the properties most important for maintaining hollow fiber membrane integrity. Tensile strength testing revealed that the strongest fiber was an asymmetric polyacrylonitrile membrane fiber. The weakest fiber was a symmetric polyethylene membrane fiber. Pilot plant testing on the four membrane modules revealed that membrane symmetry may be a more important factor than potting technique for hollow fiber integrity. Results from the SEM and tensile testing were used as input to a finite element analysis model used to evaluate time-dependent structure-fluid interactions. It was found that additional stresses at the juncture of the potting material and the hollow fiber membranes exist. These stresses likely lead to the formation of fractures.     

Ozonation of Humic Substances: Effects on Molecular Weight Distributions of Organic Carbon and Trihalomethane Formation Potential

Four different sources of humic substances were studied to determine the effects of ozonation on molecular weight-distributions, based on dissolved organic carbon (DOC) and trihalomethane formation potential (THMFP). Solutions of two soil-derived fulvic acids and a one soil-derived humic acid, as well as dissolved organic matter (DOM) associated with a natural water source were studied. Both gel permeation chromatography (GPC) and ultrafiltration (UF) were employed to define apparent molecular weight (AMW). Applied ozone doses ranged from 2.0 to 2.5 mg O₃/mg DOC. Overall samples of untreated and ozonated waters, as well as individual molecular weight fractions, were characterized according to DOC, UV absorbance, and THMFP. Ozonation resulted in a significant disappearance of higher AMW material with a corresponding increase in lower AMW material. Although little overall reduction in DOC concentration was observed, significant overall reductions in UV absorbance and THMFP levels were observed.     

HOW LIQUIDS SPREAD ON SOLIDS

A theory of the wetting of solids by liquids is put forward. The theory accounts for capillary pressure gradient, gravitational potential gradient, surface tension gradient, disjoining pressure gradient driving forces of flow in thick thin-films and of surface diffusion in thin thin-films. Disjoining pressure stems from the way intermolecular forces aggregate in submicroscopically thin films. For thick thin-films of slowly varying thickness the lubrication approximation to velocity distributions is appropriate. With this approximation the spontaneous, unsteady, two-dimensional spreading of liquid is shown to be governed by a nonlinear convective-diffusion equation for the evolution of the film thickness profile. The predictions of the theory agree with Marmur and Lelah's (1980, 1981) observations of water drops spreading on glass and with Bascom, Cottington and Singleterry's (1964) and Ludviksson and Lightfoot's (1971) observations of oils spreading on high energy surfaces. The theory is used to analyze Derjaguin and co-workers' (1944, 1957, 1970) blowing-off experiments designed to measure thin-film rheology. The theory is also used to buttress the proposition that much contact angle hysteresis is due simply to slow attainment of equilibrium.     

Modeling of the dynamics of transient liquid films in ternary systems

The presence of a concentration gradient across a thin liquid film leads to the phenomenon of isothermal liquid film migration (LFM). In most cases, the concentration gradient is due to coherency stresses, and the migration of the liquid film results in the relaxation of these stresses. It is also possible to envisage cases in which LFM occurs as a result of chemical solubility differences between stable and metastable phases. Both situations are examined in this contribution with special emphasis on the effect of adding a second solute element to the liquid phase. The kinetics of LFM is examined as a function of the initial liquid concentration and the ratio of the solute diffusion coefficients in a model coherency-driven ternary system. The growth of the Γ₂ inside δ particles in the Zn-Fe-Al system is presented as a possible example of chemically driven LFM. This article was presented at the Multicomponent-Multiphase Diffusion Symposium in Honor of Mysore A. Dayananda, which was held during TMS 2006, the 135th Annual Meeting and Exhibition, March 12–16, 2006, in San Antonio, TX. The symposium was organized by Yongho Sohn of University of Central Florida, Carelyn E. Campbell of National Institute of Standards and Technology, Richard D. Sisson, Jr., of Worcester Polytechnic Institute, and John E. Morral of Ohio State University.     

Public Cellphone Use Does Not Activate Negative Responses in Others…Unless They Hate Cellphones

Ostracism dramatically reduces psychosocial well‐being. Many studies have examined ostracism within digital environments, but to our knowledge no one has examined ostracism as manifested through public cellphone use. Experimental data revealed that public texting or reading on a cellphone was less ostracizing to copresent others than face‐to‐face ostracism but more ostracizing than face‐to‐face inclusion. Though cellphone use was somewhat ostracizing it did not prompt negative psychological effects, supporting the notion of cellphone taken‐for‐grantedness. Exceptions were found for those reporting phone technostress; these individuals were negatively affected by exposure to someone reading on a cellphone. Findings extend the ostracism paradigm to a new context and support research on the importance of attitudes and norms in shaping the effects of public cellphone use.     

In situ, noninvasive characterization of superhydrophobic coatings

Light scattering was used to measure the time-dependent loss of air entrapped within a submerged microporous hydrophobic surface subjected to different environmental conditions. The loss of trapped air resulted in a measurable decrease in surface reflectivity and the kinetics of the process was determined in real time and compared to surface properties, such as porosity and morphology. The light-scattering results were compared with measurements of skin-friction drag, static contact angle, and contact-angle hysteresis. The in situ, noninvasive optical technique was shown to correlate well with the more conventional methods for quantifying surface hydrophobicity, such as flow slip and contact angle.