Structural and electrical properties of TlLiWO4 ceramics

Abstracts are not published in this journal     

涡旋式压缩机中的蒸气喷射

这篇论文定量分析了在应用于空调及制冷场合时，在涡旋压缩机中应用蒸气喷射技术带来的潜在优势。蒸气喷射将压缩过程划分为两个阶段，减小压缩机功耗和降低蒸发器吸气流量，从而提高其容量。另外比较了两套均采用涡旋压缩机并且同为三冷吨容量的系统(一套使用蒸气喷射技术而另一套则不使用)。建立了一个多级压缩机模型，考虑了过压缩和欠压缩并根据一个单级系统得到了验证。详细的数学模拟模型预测表明，对于空调系统来说COP将提高约6～8％，而压缩机排量将降低16％。对于制冷装置来说，也能获得类似的好处。     

Determining link weight system under various objectives for OSPF networks using a Lagrangian relaxation-based approach

An important traffic engineering problem for OSPF networks is the determination of optimal link weights. Certainly, this depends on the traffic engineering objective. Regardless, often a variety of performance measures may be of interest to a network provider due to their impact on the network. In this paper, we consider different objectives and discuss how they impact the determination of the link weights and different performance measures. In particular, we propose a composite objective function; furthermore, we present a Lagrangian relaxation-based dual approach to determine the link weight system. We then consider different performance measures and discuss the effectiveness of different objectives through computational studies of a variety of network topologies. We find that our proposed composite objective function with Lagrangian relaxation-based dual approach is very effective in meeting different performance measures and is computationally very fast.     

A tetracene-based single-electron transistor as a chlorine sensor

An organic molecular single-electron transistor (SET) based on a tetracene quantum dot has been modeled and employed for sensing of chlorine gas, within the framework of density functional theory. The sensing behavior of the SET is estimated through a charge-stability diagram and total energy as a function of gate potential (TE vs. V_g) for varying distances of chlorine from the SET quantum dot, which could be used as an electronic fingerprint for detection. The better sensing ability, high power efficiency and large operational temperature range of tetracene SET, in comparison to conventional sensors, makes it a very powerful candidate for a chlorine gas sensor.     

Comparative Review on Structure,Properties, Fabrication Techniques,and Relevance of Polymer Nanocomposites Reinforced with Carbon Nanotube and Graphite Fillers

Owing to their remarkable electrical, mechanical, thermal, catalytic, and optical properties as well as their unique structure, carbon nanotubes and graphite have been exploited to produce high performance and multifunctional composites. The resultant composites are differentiated on the basis of their properties to meet various applications. In the framework of this review article, we have mainly focused on the preparation, structure, and properties of two families of composite materials with an emphasis on the differences between them. Moreover, the current challenges, future prospectives, and applications of carbon nanotubes- and graphite-based materials in sensors and in photovoltaic and energy storage devices (Li-ion battery) have been discussed.     

Solvent-Free Selective Oxidation of Benzyl Alcohol and Benzaldehyde by tert-Butyl Hydroperoxide Using MnO- 4-Exchanged Mg–Al–Hydrotalcite Catalysts

MnO^- ₄ (0.4 mmol/g)-exchanged Mg-Al-hydrotalcite is an active and highly selective catalyst for the oxidation of benzyl alcohol to benzaldehyde by tert-butyl hydroperoxide under reflux in the absence of solvent. It also shows high activity for the oxidation of benzaldehyde to benzoic acid. The higher the Mg/Al ratio, the higher is the catalytic activity (in both the reactions) and basicity of the hydrotalcite catalyst.     

Electrostatic capillary collector for in-situ spectroscopic analysis of aerosols

Identification of particulate matter is important in assessing an individual’s exposure to potentially harmful particles, such as aeroallergens, toxins, and emissions from combustion sources, which can contribute to cardio-pulmonary diseases. Efficient collection of aerosols is essential for aerosol exposure studies such as analysis of chemical and biological components. We present the design and evaluation of a capillary collector that collects PM_2.5 onto the outer surface of a capillary for in-situ spectroscopic analysis. The capillary collector uses a needle-to-ring corona generator to charge particles; the electric field between a cylinder and a wire inserted into the bore of a capillary is used to collect the charged particles. Corona and repelling voltages are optimized for maximum collection of ambient PM_2.5 particles and fluorescent polystyrene latex microspheres in the PM_2.5 size range, on the capillary. The capillary collection efficiency of ambient PM_2.5 at 3 slpm operating flow rate and optimal operating voltages is 63%. Fluorescence spectroscopy is used to quantify the collection of polystyrene latex microspheres. The fluorescence-based capillary collection efficiency is in close agreement with the capillary collection efficiency of ambient PM_2.5. The collection and analysis methodology can be used to develop a compact, low-cost sensor for in-situ spectroscopic analysis of aerosols to determine their chemical composition for source apportionment.

Copyright © 2019 American Association for Aerosol Research     

Conventional and Non-conventional Edible Oils: An Indian Perspective

The Indian dietary pattern has undergone major changes over the past 40 years. Many of these changes involve modification in dietary intake of fats and oils. In developing countries like India, vegetable oils are replacing animal fats because of the cost and health concerns. A wide range of vegetable oils are available in the market but the choice of healthy cooking oil has been a controversial subject since ideas keep on changing as new evidence accumulates. One of the factors holding back the increased use of value-added healthy oils in India is that most potential consumers are genuinely not aware of their health benefits. Edible oil consumption is primarily a community-driven phenomenon in India. The purpose of this paper is to highlight the current scenario of edible oils in India, their composition, health benefits, food applications, stability issues and future aspects as buying the right oil for health has become of great importance.     

Dielectric relaxation of conductive carbon black reinforced ethylene‐octene copolymer vulcanizates

The dielectric relaxation behavior of different conducting carbon black‐filled ethylene‐octene copolymer (EOC) vulcanizates prepared by melt‐mixing method has been studied as a function of frequency (100 Hz–5 MHz) over a wide range of temperatures (25–100°C). The effect of filler loading and frequency on AC conductivity, dielectric permittivity, impedance, and dielectric loss tangent (tanδ) has been studied. The nature of variation of the dielectric permittivity with the filler loadings was explained on the basis of interfacial polarization of the filler in the polymer matrix. The effect of filler loading on the real and complex part of the impedance was explained by the relaxation dynamics of the polymer chains in the vicinity of the fillers. The effect of filler and temperature on dielectric loss tangent, dielectric permittivity, AC conductivity, and Nyquist plot was also reported. The bound rubber (BR) value increases with increase in filler loading suggesting the formation of strong interphase, which is correlated with dielectric loss. Thermal activation energy (E_a) was found to be decreasing with the temperature, which follows the Arrhenius relation: τ_b = τ₀ exp(−E_a/K_BT) where τ_b is the relaxation time for the bulk material. From the plot of lnτ_b versus inverse of absolute temperature (1/T), the activation energies (E_a) were found to be 0.37 and 0.44eV, respectively. The percolation threshold was observed with 40 phr carbon black loading. POLYM. COMPOS., 37:342–352, 2016. © 2014 Society of Plastics Engineers     

Fabrication of poly (vinyl alcohol)/ovalbumin/cellulose nanocrystals/nanohydroxyapatite based biocomposite scaffolds

Biocomposite scaffolds composed of PVA, ovalbumin, cellulose nanocrystals, and nanohydroxyapatite were fabricated by freeze-drying method. The results revealed that the different fractions of nanohydroxyapatite and cellulose nanocrystals provide the mechanical strength and stiffness to the desired biocomposite scaffolds. In vitro biomineralization showed the formation of apatite onto the surface of obtained biocomposite scaffolds and increased as amount of nanohydroxyapatite increased. The obtained results suggest that the different combinations of these four biomaterials can be used to fabricate highly porous scaffolds with desired mechanical performance and degradation rate by adjusting ratio for potential use in low load-bearing applications.