Accumulation of heavy metals in circumpolar willow ptarmigan (Lagopus l. lagopus) populations

A circumpolar survey of heavy metals in willow ptarmigan liver and kidney revealed considerable variations in Cd content in Canada and Scandinavia. The Cd content in central Canada was comparable with that in Scandinavia and Russia, at least for kidney. However, in both liver and kidney the median for Canada as a whole was much higher than in the other countries. Some Canadian locations had exceptionally high levels, several birds having >50 mg kg(-1) in liver and >400 mg kg(-1) in kidney. In Norway, the Cd content was highest in central mountain areas in south Norway and inland locations in the two northernmost counties. Five locations in central and north Norway showed mean Cd levels in kidney above 100 mg kg(-1). It is difficult to evaluate regional differences in Sweden, but most locations had the same Cd level as moderately contaminated locations in Norway. Cd levels in Russia were comparable to moderately contaminated locations in the other countries. Due to a high intake of willow, naturally rich in Cd, direct comparison of the Cd level in willow ptarmigan from different locations cannot reveal the effects of long-range pollution. The Pb concentration in willow ptarmigan kidney and liver varied significantly in Norway and Canada, but not in Sweden and Russia. Levels in Sweden and Russia were comparable to those in Canada and low levels in Norway. The highest median value from all locations within countries was found in Norway, both in liver and kidney. The highest Pb content was found in south Norway, indicating an effect of long-range pollution in willow ptarmigan. The level in western Canada was significantly higher than in central Canada. The Hg content in liver varied significantly from one location to another in all the countries and in kidney everywhere except Sweden. In Scandinavia, there is no distinct regional pattern. Canada had a significantly higher Hg level in central than western regions in both tissues the opposite of that found for Cd and Pb. Cu and Zn showed significant variations from one location to another in liver and kidney in Canada and Norway, but only in kidney in samples from Sweden. Comparison between western and central Canada revealed a significant difference for Cu in liver, samples from central Canada having more. There are no significant differences from one country to another, but some localities in Canada seem to have higher Cu concentrations in kidney than are found in Scandinavia and Russia.     

Decision support systems in water resources in the demarcated region of Douro – case study in Pinhão river basin,Portugal

This paper puts forward the importance of decision support systems (DSS) for the planning and management of water resources. A case study of the Pinhão river basin, in Portugal, is presented. Given the importance of vineyards in the Douro region, it is important to determine if water availability will be enough to meet present and future water demands. In order to answer this question, DSS tools were used to assess different scenarios. The MIKE BASIN software was used in the hydrographical basin of Pinhão river, assisted by a geographic information system, GIS, which allowed the modelling of the basin, both temporally and spatially, facilitating the visualisation and interpretation of results. According to the attained results, it was verified that, at present, the hydrographical basin meets the considered water needs. The DSS proved to be an important tool to assist the decision‐making process in the studied river basin.     

Use of an environmental specimen bank for evaluating the impact of the Prestige oil spill on the levels of trace elements in two species of Fucus on the coast of Galicia (NW Spain)

In the present study we investigated possible contamination by trace elements due to the oil slick caused by the shipwreck of the Prestige oil tanker, in two species of brown macroalgae (Fucus vesiculosus and Fucus ceranoides) collected from the coastal area most severely affected by the spill (Galicia, NW Spain). The oil slick apparently did not cause significant increases in the concentrations of the trace elements studied, except vanadium. It appears that the magnitude of terrestrial inputs to coastal waters is sufficiently high to mask the inputs of trace elements from the fuel. The observed exception of V suggests that bioaccumulation of this element by the two species of Fucus may be used to indicate exposure to petrochemical products similar to the Prestige fuel. The findings of the study are another example of the importance of the existence of Environmental Specimen Banks for studies of this type.     

A novel sediment gas sampler and a subsurface gas collector used for measurement of the ebullition of methane and carbon dioxide from a eutrophied lake

A novel sediment bubble gas sampler and a subsurface bubble gas collector were designed to measure the ebullition of gases from profundal sediments of aquatic ecosystems. The sediment gas sampler was constructed to collect bubble gas samples directly from the uppermost sediment layers for gas composition analysis. The floating subsurface gas collector, designed to trap the bubbles released naturally from sediments, permitted the measurement of both the volume and the composition of the bubble gas. Due to its low cost, light weight and rapid sampling capability, the gas collector is ideal for studies requiring many replicate collectors. These devices were used for measurement of the ebullition of methane (CH4) and carbon dioxide (CO2) during an open water period from hypereutrophic Lake Postilampi, situated within the midboreal zone in Finland. The bubble gas obtained from the sediment with the sediment gas sampler had higher concentrations of CH4 and CO2 than the bubbles trapped in the gas collectors. This indicated that the bubble gas composition changed, either naturally during the migration of the bubbles from the sediment through the water column to the gas collectors, and/or during their storage in the collectors prior to sampling. The mean CH4 ebullition from Lake Postilampi was estimated to be in the range from 36 to 46 mg m(-2 d(-1), based on the bubble gas CH4 concentrations measured from the gas collectors and sediment, respectively. The bubbles contained only 0.02-0.57% of CO2 and thus, the ebullition had no significance in the release of CO2 from the lake.     

Assessing the public health risk of microbial intrusion events in distribution systems: conceptual model, available data, and challenges

Low and negative pressure events in drinking water distribution systems have the potential to result in intrusion of pathogenic microorganisms if an external source of contamination is present (e.g., nearby leaking sewer main) and there is a pathway for contaminant entry (e.g., leaks in drinking water main). While the public health risk associated with such events is not well understood, quantitative microbial risk assessment can be used to estimate such risk. A conceptual model is provided and the state of knowledge, current assumptions, and challenges associated with the conceptual model parameters are presented. This review provides a characterization of the causes, magnitudes, durations and frequencies of low/negative pressure events; pathways for pathogen entry; pathogen occurrence in external sources of contamination; volumes of water that may enter through the different pathways; fate and transport of pathogens from the pathways of entry to customer taps; pathogen exposure to populations consuming the drinking water; and risk associated with pathogen exposure.     

Cold Spray Deposition of Freestanding Inconel Samples and Comparative Analysis with Selective Laser Melting

Cold spray offers the possibility of obtaining almost zero-porosity buildups with no theoretical limit to the thickness. Moreover, cold spray can eliminate particle melting, evaporation, crystallization, grain growth, unwanted oxidation, undesirable phases and thermally induced tensile residual stresses. Such characteristics can boost its potential to be used as an additive manufacturing technique. Indeed, deposition via cold spray is recently finding its path toward fabrication of freeform components since it can address the common challenges of powder-bed additive manufacturing techniques including major size constraints, deposition rate limitations and high process temperature. Herein, we prepared nickel-based superalloy Inconel 718 samples with cold spray technique and compared them with similar samples fabricated by selective laser melting method. The samples fabricated using both methods were characterized in terms of mechanical strength, microstructural and porosity characteristics, Vickers microhardness and residual stresses distribution. Different heat treatment cycles were applied to the cold-sprayed samples in order to enhance their mechanical characteristics. The obtained data confirm that cold spray technique can be used as a complementary additive manufacturing method for fabrication of high-quality freestanding components where higher deposition rate, larger final size and lower fabrication temperatures are desired.     

Design update,thermal and fluid dynamic analyses of the EU-HCPB TBM in vertical arrangement

In the frame of the activities of the EU Breeder Blanket Programme and of the Test Blanket Working Group of ITER, the Helium Cooled Pebble Bed Test Blanket Module (HCPB TBM) is developed in Forschungszentrum Karlsruhe (FZK) to investigate DEMO relevant concepts for blanket modules.The three main functions of a blanket module (removing heat, breeding tritium and shielding sensitive components from radiation) will be tested in ITER using a series of four TBMs, which are irradiated successively during different test campaigns. Each HCPB TBM will be installed, with a vertical orientation, into the vacuum vessel connected to one equatorial port. As the studies performed up to 2006 in FZK concerned a horizontal orientation of the HCPB TBM, a global review of the design is necessary to match with the new ITER specifications.A preliminary version of the new vertical design is proposed extrapolating the neutronic analysis performed for the horizontal HCPB TBM. An overview of the new HCPB TBM vertical designs, as well as the preliminary thermal and fluid dynamic analyses performed for the validation of the design, are presented in this paper. A critical review of the results obtained allows us, in the conclusion, to prepare a plan for the future detailed analyses of the vertical HCPB TBM.     

Effect of solid hold-up on nitrite accumulation in a biofilm reactor--molecular characterization of nitrifying communities.

Biological ammonium oxidation was carried out in two inverse turbulent bed reactors fed with synthetic mineral wastewater containing a high ammonium concentration (100 mg N-NH4+/L). Both reactors were started-up and operated in the same conditions except for the solid carrier concentration: the solid hold-up ratios applied, defined as the ratios of static to expanded bed height, were 0.1 and 0.3 in reactors R10 and R30 respectively. These two solid hold-up ratios generate different particle-to-particle collision frequencies and, therefore, detachment forces. The influence of solid hold-up on biofilm growth and nitrifying performance was studied from a macroscopic (i.e. nitrate and/or nitrite production) and microbiological point of view. After 60 days of operation, both reactors contained the same amount of biomass. However, R10 produced only nitrate while nitrite accumulated in R30. A comparison of microbial populations in the reactors showed that R10 contained both ammonium and nitrite oxidizing populations such as Nitrosomonas and Nitrospira, whereas in R30, ammonium oxidizing populations were much greater than those of nitrite oxidizers. The major ammonium-oxidizing organism was not the same in both reactors.     

Inclusion Chromatography of Amino Acids on beta-Cyclodextrin-Polymer Gel Beds

The cyclodextrin-polymer produced by cross-linking β-cyclodextrin in the form of regular beads proved to be well utilizable for fractionating mixtures of amino acids, especially for separating aromatic amino acids from non-aromatic amino acids and from each other by inclusion chromatography. The relative elution volumes of natural amino acids and HETP (height equivalents of the theoretical plates) values determined on β-cyclodextrinpolymer gel beds are given.     

Neuropsychopharmacology of Emerging Drugs of Abuse: meta- and para-Halogen-Ring-Substituted α-PVP (“flakka”) Derivatives

Changes in the molecular structure of synthetic cathinones has led to an increase in the number of novel emerging drugs in the illicit drug market at an unprecedented rate. Unfortunately, little is known about the neuropsychopharmacology of recently emerged halogen-substituted α-PVP derivatives. Thus, the aim of this study was to investigate the role of para- and meta-halogen (F-, Cl-, and Br-) substitutions on the in vitro, in silico, and in vivo effects of α-pyrrolidinopentiophenone (α-PVP) derivatives. HEK293 cells expressing the human dopamine or serotonin transporter (hDAT and hSERT) were used for the uptake inhibition and transporter affinity assays. Molecular docking was used to model the interaction mechanism against DAT. Swiss CD-1 mice were used for the horizontal locomotor activity, open field test, and conditioned place preference paradigm. All compounds demonstrated potent DA uptake inhibition and higher DAT selectivity than cocaine. Meta-substituted cathinones showed higher DAT/SERT ratios than their para- analogs, which correlates with an increased psychostimulant effect in vivo and with different meta- and para-in silico interactions at DAT. Moreover, all compounds induced rewarding and acute anxiogenic effects in mice. In conclusion, the present study demonstrates the role of meta- and para-halogen substitutions in the mechanism of action and provides the first evidence of the rewarding and anxiety-like properties of halogenated α-PVP derivatives.