Thraustochytrid as a potential source of carotenoids

Thraustochytrids, marine protists whose dominant genera are Thraustochytrium and Schizochytrium, belong to the kingdom Chromista and are known as an industrial source of DHA. We describe here that thraustochytrid strain KH105, isolated as a DHA producer, also accumulates significant levels of β-carotene and xanthophylls including canthaxanthin and astaxanthin. A4-d cultivation using a medium composed of 10% glucose and less than 0.3% of nitrogen sources in a half-concentration of seawater gave an astaxanthin production up to 6.1 mg/L, and canthaxanthin content reached more than 10 mg/L under conditions where a higher concentration of nitrogen sources (6%) was employed. It might be advantageous in mass production systems for these carotenoids to be extracted readily by simply suspending the cells with organic solvents such as acetone and chloroform. Analyses on the morphological and life history features of the KH105 strain revealed that it belongs to the genus Schizochytrium. This particular species of thraustochytrids is thus considered to be a promising source of xanthophylls as well as DHA for use in the food industry.     

Dehydrogenative Cracking of n-Butane over Modified HZSM-5 Catalysts

Dehydrogenative cracking reaction of n-butane was studied using HZSM-5 catalyst modified with various metal oxides. Alkaline earth (magnesium), transition metal (cobalt) and rare earth (lanthanum) elements are used for the modification. The selectivity of the products was studied at low conversion (20%). Methane, ethane, ethylene, propylene, butenes and butadiene were the main products. With the use of the cobalt- or magnesium-containing HZSM-5, dehydrogenative cracking was observed and the selectivity of ethylene was much larger than that of ethane. On the other hand, the selectivity of ethylene and ethane were almost the same in the reaction using the lanthanum-containing HZSM-5. It is considered that the cobalt- and magnesium-loaded sites on HZSM-5 played an important role in the dehydrogenative cracking.     

通用化程度对装备系统效能影响分析

系统效能是衡量装备战斗力的重要指标,而通用化程度影响着装备系统效能．通过引用装备系统效能和通用化程度概念及计算方法,针对换件维修装备,建立了通用化程度对装备系统效能影响的量化模型．仿真结果验证了模型的实用性,可为装备的设计与综合保障提供理论参考．     

Effect of Computational Constraints on Zero-Dimensional Computations for the Nanosecond-Order Ignition Process of the CH4/Air Mixture

Combustion, Explosion, and Shock Waves - Zero-dimensional computations of nanosecond-order ignition using a nanosecond discharge are performed with two constraints. The effects of these constraints...     

Electrochemical properties of iron rust

In order to elucidate the electrochemical properties of iron rust, galvanostatic cathodic polarization of rusted steel and rust electrodes, prepared by fixing a piece of rust plate on an acrylic plate with conductive adhesive, was examined. The change in the amount of crystalline substances in the rust layer was observed by X-ray diffraction. The electrochemically active intermediate substances, could not be identified by X-ray diffraction, but their behaviour was distinguished from that of crystalline substances. The rest potential of the rust electrode was controlled by the equilibrium potential of intermediate substances. “An overlapping dual electrode” model is proposed for rusted steel in aqueous solution. Beneficial elements added to weathering steel inhibit the formation of crystalline magnetite in the cathodic reduction process of rust and increase the electrical resistance of the rust layer.     

Influence of chromium on the local structure and morphology of ferric oxyhydroxides

The extended X-ray absorption fine structure (EXAFS) method and transmission electron microscopy (TEM) have been used for characterizing the local structure and morphology of ferric oxyhydroxides, α-FeOOH and γ-FeOOH, with and without chromium. These ferric oxyhydroxide powders were prepared from aqueous solutions containing iron and chromium ions. Radial structural functions for iron obtained by Fe K edge EXAFS spectra showed that the linkage of structural units formed by FeO₆ octahedra in γ-FeOOH is distorted by chromium addition, while such distortion in α-FeOOH is not clearly detected. On the other hand, Cr K edge EXAFS spectra showed that the local structure around chromium does not necessarily correspond to the local structure around of iron, which is observed by Fe K edge EXAFS spectra. This suggests that the structural units containing iron and chromium are heterogeneously distributed in these ferric oxyhydroxides. The local structural information was discussed coupled with morphological features of these ferric oxyhydroxides observed by TEM.     

Difference between mechanical alloying and mechanical disordering in the amorphization reaction of Al50Ta50 in a rod mill

Amorphous Al₅₀Ta₆₀ alloy powders have been synthesized by mechanical alloying (MA) from elemental powders of aluminium and tantalum, and mechanical disordering (MD) from crystalline intermetallic compound powders of AlTa respectively using the rod milling technique. The mechanically alloyed and the mechanically disordered alloy powders were characterized by X-ray diffraction, scanning electron microscopy, electron probe microanalysis, transmission electron microscopy, differential thermal analysis, differential scanning calorimetry and chemical analysis. The results have shown that the crystal-to amorphous transformation in the MD process occurs through one stage, while the crystallineto-amorphous formation in the MA process occurs through three stages. At the early and intermediate stages of the MA time, heating the alloy powders to 700 K leads to the formation of an amorphous phase by a solid-state amorphizing reaction. At the final stage of the MA time, the amorphous phase is crystallized through a single sharp exothermic peak. Contrary to this, amorphous alloy powders produced by MD are crystallized through two broad exothermic peaks.     

Dynamic recrystallization by rapid heating followed by compression for a 17Ni–0.2C martensite steel

A 17Ni–0.2C martensite steel was rapidly heated below the austenite formation temperature and deformed in compression. Continuous dynamic recrystallization was observed. The behavior is similar to that in a ferrite–pearlite steel but the onset strain is much smaller. Sub-micron ferrite grains were obtained through the dynamic recrystallization.     

辽宁省中小河流治理综合整治新理念

在中国江河防洪体系中,与大江大河相比,中小河流有着数量多、分布广的特点,目前普遍存在的问题就是因没有经过系统有效的治理,河道萎缩严重、河道内垃圾淤积、河道功能衰退等,常遇洪水下就有可能发生洪涝灾害,所以对中小河流治理是十分必要和紧迫的。文章以辽宁省的中小河流治理工程为对象,探讨建立中小河流长效保护机制以及对中小河流进行治理的措施,为辽宁省中小河流以后的治理工作提供一些参考。