Corrosion Behavior of a Sputtered K38G Nanocrystalline Coating with a Solid NaCl Deposit in Wet Oxygen at 600 to 700°C

A nanocrystalline coating of K38G alloy was obtained by means of magnetron sputtering. The corrosion behavior of cast K38G alloy and its sputtered nanocrystalline coating with a solid NaCl deposit in dry air or wet oxygen at 600 and 700°C have been studied and compared. The results indicated that the mass gain of the coating is higher than that of the cast alloy at 600 and 700°C. Therefore, nanocrystallization reduced the corrosion resistance at these temperatures. Furthermore, the mass gains of the coating and the cast alloy with a NaCl deposit in wet oxygen were less than that with a NaCl deposit in dry air. The relevant corrosion mechanisms are discussed.     

Ni-Mo-O催化剂中协同作用对丙烷氧化脱氢的影响

在 Ni-Mo-O体系中 ,加入 Mo O3 能极大地提高丙烷氧化脱氢制丙烯的反应活性。选用固混法、沉淀法、柠檬酸法制备了 Mo O3 过量 1 5 % (摩尔分数 )的α -Ni Mo O4催化剂 ,其中用沉淀法制得催化剂在 5 0 0℃ ,V( C3 H8) /V ( O2 ) /V ( N2 ) =1 0 /1 0 /5 0 ,反应气流量为 70 m L/min的条件下丙烷转化率可达 38.7% ,丙烯选择性达 70 .1 4 %。经 XRD,XPS,TPR表征说明 ,在含有过量 Mo O3 的催化剂中 ,α -Ni Mo O4与 Mo O3 两种晶体之间可产生微小的相互吸引 ;从而发挥协同作用 ,是提高催化剂活性     

无线局域网中基于RC4的加密算法的分析与改进

分析RC4加密算法自身的缺陷和无线局域网WEP协议对RC4的误用,介绍了TKIP协议在安全性方面的改进。     

油田放射性作业人员外周血淋巴细胞染色体畸变的观察

本文调查了油田212例受γ射线和中子混合辐射照射的作业人员和30例正常人的外周血淋巴细胞染色体畸变。作业人员受γ射线照射的人均年受照剂量为1.28mGy。调查结果表明,放射性测井人员与正常人相比染色体畸变率有显著差异。     

CHARACTERIZATION OF Si_(1-x-y)Ge_xC_y FILMS GROWN BY ION IMPLANTATION AND SUBSEQUENT SOLID PHASE EPITAXY

Si1-x-yGexCy ternary alloy films were grown on monocrystalline silicon substrates by C ion implantation and subsequent solid phase epitaxy (SPE). Two-step anneal-ing technique was employed in the SPE. The structure and electrical properties of the alloy films were determined using Fourier transform infrared spectroscopy and van der Pauw Hall measurements, respectively. With the optimization of two-step anneal-ing technique for the implanted Si1-x-yGexCy layers, a certain amount of C atoms occupied substitutional sites and no SiC was formed.     

关于非线性浅水波理论中的孤立波解

本文在[1]的基础上,详尽地得到了Boussinesq方程和KdV方程的孤立波解,并对波高和波形进行了细致的分析。为了更好地比较,本文还给出了高阶摄动的孤立波解。     

圩区排涝模数计算方法研究

合理确定圩区排涝模数对于降低涝灾损失有重要意义。圩区内土地利用性质的不同,会导致产汇流机制和排涝标准的不同,但排涝模数的计算方法基本一致。本文根据圩区下垫面条件进行产汇流计算,入河流量扣除滞蓄量得到排涝模数,充分考虑到圩内河道的调蓄作用。以常熟市为例,对城镇圩区、农业圩区排涝模数进行计算,并分析了两种圩区不同的排涝要求对排涝模数计算方法的影响。     

三维频率复用环境中的信道偏移指配方法

一种新的信道指配法－信道偏移指配方法正受到越来越多的重视，这种方法能在现有的频率资源条件下，较大地提高移动通信系统的容量。本文主要讨论了三维频率复用环境中的信道偏移指配方法，详细地分析了同频复用和相邻信道使用距离，定量地计量了信道偏移系统的频谱节约效率。本文最后还通过几个实例验证了所提算法的实用性。     

我国有线电视事业的现状和发展

本文详细系统地介绍了我国有线是视发展历史和现状，及其经营和管理方法。重点介绍了北美的ＣＡＴＶ技术发展动向。最后，指出我国ＣＡＴＶ事业发展中的应用重视的问题。     

A Petri net based approach to modeling and scheduling for an FMSand a case study

In this paper, a timed-place Petri net (TPPN) model for flexible manufacturing systems (FMSs) is constructed, which contains two major submodels: the stationary transportation model; and the variable process flow model. For multiple automated guided vehicle (AGV) systems, the authors embed a simple rule and introduce a push-AGV strategy in a TPPN model to solve the collision and traffic jam problems of such vehicles. Since a firing sequence of the TPPN from the initial marking to the final marking can be seen as a schedule of the modeled FMS, by using an A^* based search algorithm, namely, the limited-expansion A algorithm, an effective schedule of the part processing can be obtained. To show the promising potential of the proposed work, a prototype FMS is used as a target system for implementation. The experiment results assert that the job-shop scheduling problem can always be satisfactorily solved