激光快速成形Rene′88DT高温合金的时效强化研究

研究了时效时间对激光快速成形后时效硬化镍基高温合金Rene′88DT中沉淀相组织演化和力学性能的影响。发现随时效时间的增加，沉淀相y’略有长大，颗粒之间发生大颗粒吞噬小颗粒的粗化，时效40h后沉淀相颗粒粗化明显。对经不同时间时效后的激光快速成形Rene′88DT试样进行了硬度测试。结果显示，在时效时间为28h时，硬度有一峰值HRC49。在此基础上，采用1165℃，2h固溶、空冷＋760℃，28h时效的热处理工艺对激光快速成形标准拉伸棒样进行了热处理，拉伸结果显示成形件的抗拉强度较激光沉积态提高了400MPa，屈服强度接近同种材料的粉末锻造水平。     

A comparison between atmospheric water vapour content retrieval methods using MSG2-SEVIRI thermal-IR data

Atmospheric water vapour content (WVC) is a vital parameter in the study of climate change. Various methods have been developed to derive atmospheric WVC from remotely sensed data. In this study, we compared three methods for retrieving atmospheric WVC from thermal infrared data in the Meteosat Second Generation-SEVIRI channels 9 (10.8 μm) and 10 (12.0 ?m). The three methods are (1) the split-window covariance-variance ratio method using a spatial moving window (method 1); (2) the split-window covariance-variance ratio method using a temporal moving window (method 2); and (3) the varying surface temperature method using split-window channel data (method 3). The derived WVC using these three methods was compared to two WVC data sets from European Centre for Medium-Range Weather Forecasts (ECMWF) reanalysis data and the MODIS WVC product. Compared with these two data sets, the derived WVC using method 1 performed proved optimal. The valid pixels using methods 1 and 2 are greater than those using method 3. Furthermore, method 2 can be used to retrieve WVC over pixels where method 1 is invalid.     

Synchronization for linear singularly perturbed complex networks with coupling delays

This paper is concerned with the synchronization problem about linear singularly perturbed complex network system with coupling delay. The sufficient delay-dependent conditions for the synchronization of the network are established by introducing an equivalent network system with the Lyapunov stability theory. These conditions, which are formulated in terms of linear matrix inequalities, can be solved efficiently by the LMI toolbox of MATLAB. A simulation example is provided to show the validity of the proposed the synchronization conditions of the whole network.     

Camouflage texture evaluation using a saliency map

Multimedia Systems - Camouflage effect evaluation and examination is an important procedure in digital camouflage pattern design as it is helpful in improving the objectivity and effectiveness...     

Multifocus image fusion method of Ripplet transform based on cycle spinning

The curvelet transform can represent images at both different scales and different directions. Ripplet transform, as a higher dimensional generalization of the curvelet transform, provides a new tight frame with sparse representation for images with discontinuities along C² curves. However, the ripplet transform is lack of translation invariance, which causes the pseudo-Gibbs phenomenon on the edges of image. In this paper, the cycle spinning method is adopted to suppress the pseudo-Gibbs phenomena in the multifocus image fusion. On the other hand, a modified sum-modified-laplacian rule based on the threshold is proposed to make the decision map to select the ripplet coefficient. Several experiments are executed to compare the presented approach with other methods based on the curvelet, sharp frequency localized contourlet transform and shearlet transform. The experiments demonstrate that the presented fusion algorithm outperforms these image fusion works.     

Bounds on multipartite concurrence and tangle

We present an analytical lower bound of multipartite concurrence based on the generalized Bloch representations of density matrices. It is shown that the lower bound can be used as an effective entanglement witness of genuine multipartite entanglement. Tight lower and upper bounds for multipartite tangles are also derived. Since the lower bounds depend on just part of the correlation tensors, the result is experimentally feasible.     

面向能力培养的嵌入式系统课程群建设研究

能力型、创新型人才是社会发展的需求,也是高等教育的培养目标。为了培养具备能力和创新素质的嵌入式系统方面的人才,本文进行了嵌入式系统课程群的建设,研究了相应的教学方法,从理论和实践上培养学生的能力,培养创新素质。     

山洪灾害特点分析及风险图制作方法探讨

针对我国山洪灾害人员伤亡大,防洪工程建设不经济、移民困难的现实,提出应将非工程措施.特别是绘制洪水风险图,作为目前山洪灾害管理的一项重要措施.在阐明国内外洪水风险图含义的基础上,分析了山区小流域洪水风险图制作中面临的资料缺乏和精度不高的问题,并提出了针对性的编制方法,即选取时段降雨量作为山区小流域洪水风险图绘制方案划分的依据,选择与选定降雨量接近的典型历史洪水作为该方案洪水风险图编制的实例,通过调查过往洪水淹没点情况,并利用GIS技术的空间分析功能进行洪水淹没分析.最后选取江西省黎川县厚村站为例,绘制了厚村站24 h降雨320 mm时的厚村乡洪水风险图.