Thermal Expansion of Alkaline‐Doped Lanthanum Ferrite Near the Néel Temperature

The thermal expansion and magnetic behaviors of divalent, alkaline‐doped lanthanum ferrites (La_0.9M_0.1FeO₃, M=Ca, Sr, Ba) were assessed using a combination of dilatometry, magnetometry, time‐of‐flight neutron diffraction, and high‐temperature X‐ray diffraction. Néel temperatures were determined through vibrating sample magnetometry and correlated well with changes in thermal expansion behavior observed during both dilatometry and X‐ray diffraction. The Néel temperatures observed for pure, Ca‐doped, Sr‐doped, and Ba‐doped lanthanum ferrites were 471°C, 351°C, 465°C, and 466°C, respectively. The effect of divalent substitutions on the magnetic behavior are attributed to charge compensation mechanisms and structural changes in the material.     

Glycoalkaloid Concentrations in Aerial Tubers of Potato ( Solanum tuberosumL)

The total glycoalkaloid concentrations in aerial and subterranean tubers of 14 potato genotypes were measured using high-performance liquid chromatography immediately after harvest. Post-harvest, aerial tubers from all genotypes were exposed to 144 h continuous fluorescent light; additionally three genotypes (cvs Home Guard, Kerrs Pink and Desiree) were subjected to mechanical wounding prior to glycoalkaloid analysis. Variations in glycoalkaloid concentrations between aerial tubers taken from a single genotype (cv Kerrs Pink) were determined by analysis of eight aerial tubers formed in the second leaf axil, selected from separate individual plants. Irrespective of genotype, total and individual glycoalkaloid concentrations were higher in aerial than in subterranean tubers. The highest glycoalkaloid concentrations were found in aerial tubers of cv Kerrs Pink (1343·0 mg kg⁻¹ FW) and lowest in cv Lindsey (301·0 mg kg⁻¹ FW). Ratios of α-chaconine: α-solanine in aerial tubers differed significantly ( P< 0·05) from those in subterranean tubers of cv Cara, Golden Wonder, Home Guard, Lindsey, Maris Piper, Record and 8859 indicating that exposure to light during aerial tuber growth enhanced the synthesis of one glycoalkaloid to a greater degree than the other. In all cultivars except cv Maris Piper, exposure of aerial tubers to 144 h continuous fluorescent light post-harvest increased total and individual glycoalkaloids compared with dark-treated controls. However, the ratios of α-chaconine: α-solanine in all genotypes except cv Golden Wonder (decreased α-chaconine: α-solanine, P< 0·05) were not significantly altered in comparison with dark controls, indicating that light exposure of aerial tubers post-harvest fails to enhance selectively synthesis of individual glycoalkaloids in the majority of cultivars. Regardless of cultivar, total glycoalkaloid, α-solanine and α-chaconine concentrations were higher in wounded than unwounded aerial tubers. Wounding stimulated synthesis of α-solanine more than α-chaconine ( P< 0·05) in cv Home Guard and Desiree. Glycoalkaloid concentrations in aerial tubers varied widely from a minimum of 1010 mg kg⁻¹ to a maximum of 2520 mg kg⁻¹ FW when harvested from individual plants of cv Kerrs Pink but selected from equivalent positions on the plant. Throughout the experiments large, non-significant increases in total and individual glycoalkaloid concentrations were recorded following light and wounding treatments. The scientific implications of aerial tuber formation are discussed.     

Oncogenes and the Origins of Leukemias

Self-maintaining hematopoietic stem cells are a cell population that is primarily ‘at risk’ to malignant transformation, and the cell-of-origin for some leukemias. Tissue-specific stem cells replenish the different types of functional cells within a particular tissue to meet the demands of an organism. For hematopoietic stem cells, this flexibility is important to satisfy the changing requirements for a certain type of immune cell, when needed. From studies of the natural history of childhood acute lymphoblastic leukemia, an initial oncogenic and prenatal insult gives rise to a preleukemic clone. At least a second genomic insult is needed that gives rise to a leukemia stem cell: this cell generates a hierarchy of leukemia cells. For some leukemias, there is evidence to support the concept that one of the genomic insults leads to dysregulation of the tissue homeostatic role of hematopoietic stem cells so that the hierarchy of differentiating leukemia cells belongs to just one cell lineage. Restricting the expression of particular oncogenes in transgenic mice to hematopoietic stem and progenitor cells led to different human-like lineage-restricted leukemias. Lineage restriction is seen for human leukemias by virtue of their sub-grouping with regard to a phenotypic relationship to just one cell lineage.     

Bibliometrics as weapons of mass citation

The allocation of resources for research is increasingly based on so-called 'bibliometrics'. Scientists are now deemed to be successful on the sole condition that their work be abundantly cited. This world-wide trend appears to enjoy support not only by granting agencies (whose task is obviously simplified by extensive recourse to bibliometrics), but also by the scientists themselves (who seem to enjoy their status of celebrities). This trend appears to be fraught with dangers, particularly in the area of social sciences, where bibliometrics are less developed, and where monographs (which are not taken into account in citation indexes) are often more important than articles published in journals. We argue in favour of a return to the values of 'real science', in analogy to the much-promised return to a 'real economy'. While economists may strive towards a more objective evaluation of the prospects of a company, a market, or an industrial sector, we scientists can only base our appraisal on a responsible practice of peer review. Since we fear that decision-takers of granting agencies such as the FNRS, CTI, EPFL, ETHZ, ANR, CNRS, NIH, NSF, DOE, etc. will be too busy to read our humble paper in Chimia, we appeal to scientists of all countries and disciplines to unite against the tyranny of bibliometrics.     

Thermotropic liquid crystalline polymer (Rodrun LC5000)/polypropylene in situ composite films: rheology, morphology, molecular orientation and tensile properties

In situ composite films were prepared by a two-step method. First, polypropylene and thermotropic liquid crystalline polymer (TLCP), Rodrun LC5000 (80 mol% p-hydroxy benzoic acid (HBA)/20 mol% polyethylene terephthalate (PET)), were melt blended in a twin-screw extruder and then fabricated by extrusion through a mini-extruder as cast film. Rheological behavior of the blends, morphology of the extruded strands and films, and tensile properties of the in situ composite films were investigated. Rheological behavior of the blends at 295 °C studied using a plate-and-plate rheometer revealed a substantial reduction of the complex viscosity with increasing TLCP content, and all specimens exhibited shear thinning behavior. Over the angular frequency range of 0.6-200 rad/s, the viscosity ratio (dispersed phase to matrix phase) was found to be very low, in the range of 0.03-0.07. Morphologies of the fracture surfaces of the blend extrudates and the film surfaces etched in permanganic solution were investigated by scanning electron microscope (SEM). The TLCP droplets in the extruded strands were seen with a progressive deformation into fibrillar structure when TLCP content was increased up to 30 wt%. In the extruded films, TLCP fibrils with increasing aspect ratio (length to width) were observed with increasing TLCP concentration. Orientation functions of each component were determined by X-ray diffraction using a novel separation technique. It was observed that the Young's modulus in machine direction of the extruded film was greatly improved with increasing TLCP loading, due to the increase in fiber aspect ratio and also molecular orientation.     

Hydrodynamics of a rectangular liquid JET in an immiscible liquid–liquid system

Volume of fluid and continuum surface force methodologies were applied to two‐ and three‐dimensionally model the motion of a liquid jet injected vertically downward from a rectangular nozzle into another immiscible liquid. Grid independent solutions were obtained for a 10 mm² nozzle with aspect ratios in the range 1–10. It was found that unlike the 3D simulation, the 2D CFD model was not able to predict the necking and breakup features observed in the experimental system. The 3D model showed that upon exiting the rectangular nozzle the liquid jet underwent a transition before becoming circular in cross‐section and eventually reaching an equilibrium diameter prior to breakup into droplets. For a given nozzle geometry it was found that equilibrium jet diameter increased with increasing liquid volumetric flowrate, with good agreement between CFD simulations and experimental observations. The 3D model was applied to rectangular nozzles with different aspect ratios and it was found that for a given liquid flowrate there was an optimum aspect ratio for generating minimum‐sized droplets, which was approximately 30% less than for a circular nozzle with the same cross‐sectional area. © 2011 Canadian Society for Chemical Engineering     

Mechanical properties of interpenetrating polymer network hydrogels based on hybrid ionically and covalently crosslinked networks

Hydrogels are polymer networks swollen in water. Because of their soft and wet nature, and their ability to show large volume changes, hydrogels can be useful in many biomedical and actuator applications. In these applications, it is crucial to tune the mechanical and physical properties of a hydrogel in a controllable manner. Here, interpenetrating polymer networks (IPNs) made of a covalently crosslinked network and an ionically crosslinked network were produced to investigate the effective parameters that control the physical and mechanical properties of an IPN hydrogel. Covalently crosslinked polyacrylamide (PAAm) or poly(acrylic acid) (PAA) networks were produced in the presence of alginate (Alg) that was then ionically crosslinked to produce the IPN hydrogels. The effect of ionic crosslinking, degree of covalent crosslinking, AAm : Alg and AA : Alg ratio on the swelling ratio, tensile properties, indentation modulus, and fracture energy of IPN hydrogels was studied. A hollow cylindrical hydrogel with gradient mechanical properties along its length was developed based on the obtained results. The middle section of this hydrogel was designed as a pH triggered artificial muscle, while each end was formulated to be harder, tougher, and insensitive to pH so as to function as a tendon‐like material securing the gel muscle to its mechanical supports. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2504–2513, 2013     

Fluorescent THF‐Based Fructose Analogue Exhibits Fructose‐Dependent Uptake

Recent publications suggest that high dietary fructose might play a significant role in cancer metabolism and can exacerbate a number of aspects of metabolic syndrome. Addressing the role that fructose plays in human health is a controversial question and requires a detailed understanding of many factors including the mechanism of fructose transport into healthy and diseased cells. Fructose transport into cells is thought to be largely mediated by the passive hexose transporters Glut2 and Glut5. To date, no probes that can be selectively transported by one of these enzymes but not by the other have been identified. The data presented here indicate that, in MCF‐7 cells, a 1‐amino‐2,5‐anhydro‐D ‐mannitol‐based fluorescent NBDM probe is transported twice as efficiently as fructose and that this takes place with the aid of Glut5. Its Glut5 specificity and differential uptake in cancer cells and in normal cells suggest this NBDM probe as a potentially useful tool for cross‐cell‐line correlation of Glut5 transport activity.     

Selective Hydrogenation of Ethyne in Ethene‐Rich Streams on Palladium Catalysts,Part 2: Steady‐State Kinetics and Effects of Palladium Particle Size,Carbon Monoxide,and Promoters

Developments in the last three decades of kinetics of selective hydrogenation of ethyne in ethene‐rich streams on palladium catalysts are reviewed. Most of the studies can be described comprehensively by a model that assumes carbonaceous deposits (i) create irreversibly on the palladium surface small A types of active site (selective to ethene) and large E types of active site (selective to ethane), and (ii) are involved in hydrogenation of ethene on E _s sites on the support. The relative importance of these sites, with varying (i) reaction conditions, (ii) palladium dispersion, (iii) process modifiers, and (iv) promoters, is discussed.