Large-scale parallel arrays of silicon nanowires via block copolymer directed self-assembly

Extending the resolution and spatial proximity of lithographic patterning below critical dimensions of 20 nm remains a key challenge with very-large-scale integration, especially if the persistent scaling of silicon electronic devices is sustained. One approach, which relies upon the directed self-assembly of block copolymers by chemical-epitaxy, is capable of achieving high density 1?:?1 patterning with critical dimensions approaching 5 nm. Herein, we outline an integration-favourable strategy for fabricating high areal density arrays of aligned silicon nanowires by directed self-assembly of a PS-b-PMMA block copolymer nanopatterns with a L(0) (pitch) of 42 nm, on chemically pre-patterned surfaces. Parallel arrays (5 × 10(6) wires per cm) of uni-directional and isolated silicon nanowires on insulator substrates with critical dimension ranging from 15 to 19 nm were fabricated by using precision plasma etch processes; with each stage monitored by electron microscopy. This step-by-step approach provides detailed information on interfacial oxide formation at the device silicon layer, the polystyrene profile during plasma etching, final critical dimension uniformity and line edge roughness variation nanowire during processing. The resulting silicon-nanowire array devices exhibit Schottky-type behaviour and a clear field-effect. The measured values for resistivity and specific contact resistance were ((2.6 ± 1.2) × 10(5)Ωcm) and ((240 ± 80) Ωcm(2)) respectively. These values are typical for intrinsic (un-doped) silicon when contacted by high work function metal albeit counterintuitive as the resistivity of the starting wafer (～10 Ωcm) is 4 orders of magnitude lower. In essence, the nanowires are so small and consist of so few atoms, that statistically, at the original doping level each nanowire contains less than a single dopant atom and consequently exhibits the electrical behaviour of the un-doped host material. Moreover this indicates that the processing successfully avoided unintentional doping. Therefore our approach permits tuning of the device steps to contact the nanowires functionality through careful selection of the initial bulk starting material and/or by means of post processing steps e.g. thermal annealing of metal contacts to produce high performance devices. We envision that such a controllable process, combined with the precision patterning of the aligned block copolymer nanopatterns, could prolong the scaling of nanoelectronics and potentially enable the fabrication of dense, parallel arrays of multi-gate field effect transistors.     

Influence of dietary fatty acids on the glycerophospholipid composition in organs of cod (gadus morhua)

Cod (mean start weight of 26 g) were fed three diets for 15 months, each based on a dry pellet coated at a level of 9g/100 g with soybean oil, capelin oil or sardine oil. The fatty acid compositions of neutral lipids and four glycerophospholipids of white muscle, liver, gills and heart were determined. The fatty acid composition of dietary lipids influenced the composition of neutral lipids in all organs. Linoleic acid (18∶2n−6) from soybean oil was selectively incorporated into phosphatidylcholine of the four tissues. Similar levels of 20∶5n−3 and 22∶6n−3 in phosphatidylcholine and phosphatidylethanolamine were found in all organs from cod fed capelin oil and sardine oil in spite of highly differentiated feed fatty acid levels. The polyunsaturated fatty acid (PUFA) composition of phosphatidylinositol was least influenced by dietary lipids. The preferred monoenic fatty acid in phospholipids of cod was 18∶1n−9, independent of dietary intake, whereas the longer chain monoenoic acids seemed to be preferentially catabolized. The results suggest that 20∶4n−6 as well as 20∶5n−3 and 22∶6n−3 fatty acids are essential for cod.     

Hyperthermostabilization of Bacillus licheniformis{alpha}-amylase and modulation of its stability over a 50{degrees}C temperature range

Bacillus licheniformis     

Enzymatic hydrolysis of polyester based coatings

The potential of two hydrolytic enzymes, namely a lipase from Thermomyces lanuginosus (TlL) and a cutinase from Humicola insolens (HiC) for hydrolysis of the phthalic acid backbone based polyester coatings was assessed. Two phthalic acid/trimethylolpropane based model substrates resembling the structure of the polyester backbone of coatings were synthesized. Out of both enzymes, only the cutinase was able to hydrolyze both model substrates while the larger substrate was hydrolyzed at a lower rate. The cutinase was also able to hydrolyze a coating (alkyd resin) both in suspension and as dried film. LC–MS analysis of the hydrolysis products released from the coating revealed the presence of oleic acid, its monoglyceride, phthalic acid and 2-((3-((2-((2,3-dihydroxypropoxy)carbonyl)benzoyl)oxy)-2-hydroxypropoxy)carbonyl)benzoic acid. These results indicate that the enzyme was able to hydrolyze the polyester backbone as well as to release fatty acid side chains. Consequently, enzymatic hydrolysis has a potential for the removal of coatings, their recycling or their functionalization.     

Electric Fatigue in Antiferroelectric Lead Zirconate Stannate Titanate Ceramics Prepared by Spark Plasma Sintering

The fatigue behavior of lead zirconate stannate titanate (PZST) ceramics prepared by spark plasma sintering (SPS) was investigated. Polarization and strain hysteresis loops were monitored. The material shows a high resistance to fatigue because of bipolar electric cycling. Both maximum strain and switchable polarization first show a fatigue stage 0 to 10⁵ cycles and then a fatigue-free period up to 10⁸ cycles. The maximum losses of maximum strain and switchable polarization are 18% and 10% of their initial values, respectively. The dominant fatigue mechanism is assigned to the pinning of domain walls by charged defects.     

Scanning droplet cell investigations on single grains of a FeAlCr light weight ferritic steel

Polycrystalline Fe7.5Al7Cr is a ferritic light weight steel that shows a strong anisotropic dissolution behaviour. This electrochemical phenomenon was investigated by use of a scanning droplet cell (SDC). The crystallographic orientation of the single grains was determined by electron back scatter diffraction (EBSD). The fraction of grains with a near 〈1 1 1〉 orientation (<10°) was 1.88 times higher than that of the near 〈0 0 1〉 orientation prior to annealing and 3.58 times higher after annealing. Voltammograms were performed on single grains with low index planes. The critical current density was 53% higher on 〈0 0 1〉 grains as compared to 〈1 1 1〉 grains. These results are used to discuss the electrochemical behaviour of the polycrystalline FeAlCr.     

Photocurrents and degradation rates on particulate TiO2 layers: Effect of layer thickness, concentration of oxidizable substance and illumination direction

Different routes for immobilization of TiO₂ on conducting substrates were compared to find active and stable photocatalysts, which could either be operated in open circuit (photocatalysis) or with applied electric potential (photoelectrocatalysis). The advantage of applying an electric potential was investigated. Polarization curves and photoelectrochemical degradation reactions served to characterize catalysts and to find a way of predicting the optimum synthesis conditions. The difference between front side (EE) and back side (SE) illumination is discussed as a function of layer thickness, as well as the influence of oxidizable substance concentration on photocurrents. Stability of catalysts was investigated in repetitive degradation experiments.     

Fischer–Tropsch principles of co-hydrogenation on iron catalysts

The temporal changes of product composition together with changes of the catalyst in composition and structure have been investigated for Fischer–Tropsch synthesis with an alkalized precipitated iron catalyst at 250°C, 1 MPa, using a special synthesis gas with a molar H₂/CO₂-ratio of three. It was observed that the steady state of synthesis developed in processes of self-organization during several episodes with individual kinetic regimes. Thetrue FT catalyst apparently was constructed at reaction conditions under complete consumption of -iron and formation of iron carbide (Fe₅C₂). The magnetite phase disappeared partially and a new unknown (probably FeO_x) phase was formed. It has been concluded from the data of chain growth and branching probability that during self-organization only the number of sites increased but their nature remained unchanged. Strong spatial constraints appear to apply at the sites. On iron catalysts, the FT sites are very stable, invariant against changes in reaction conditions, in contrast to FT synthesis on cobalt. There the sites show a dynamic behavior.     

Survey of the Chemical Defence Potential of Diatoms: Screening of Fifty Species for α,β,γ,δ-unsaturated aldehydes

In recent years a negative influence of diatom-derived ,,,-unsaturated aldehydes (PUA) on the reproductive success of copepods and invertebrates has been suggested. Since adverse chemical properties of diatoms would question the traditional view of the marine food web, this defense mechanism has been investigated in detail, but the PUA-release by test organisms has only been determined in a few cases. The observed effects were nevertheless frequently discussed from a general point of view often leading to contradictory conclusions. We have examined the PUA-production of 50 diatom species (71 isolates) in order to provide a basis for the interpretation of laboratory and field results on the influence of diatom food on the reproductive success of their consumers. PUA-production is species and strain dependent. Thirty-six percent of the investigated species (38% of the cultivated isolates) release ,,,-unsaturated aldehydes upon cell disruption in concentrations from 0.01 to 9.8 fmol per cell. Thalassiosira rotula and Thalassiosira pacifica, major spring-bloom forming diatoms isolated from Roscoff (Bretagne, English Channel, France) and Puget Sound (Washington, USA) were among the PUA-producing strains.