Simulation and analysis of reconfigurable assembly systems based on R-TNCES

ABSTRACT

Recent research indicates that dynamic reconfiguration techniques can be applied to manufacturing systems to reduce energy consumption by switching energy-intensive components in a timely manner between their working and idle modes during system runtime because these components consume less energy in their idle modes than in their working modes. The current work studies reconfigurable assembly systems with such dynamic reconfiguration techniques by abstracting them as reconfigurable discrete event systems, considering only their logic behavior and properties. The formalism, R-TNCES (reconfigurable timed net condition/event systems), a modular extension of the well-known Petri nets, is used as a system modeling and analysis tool. The simulation of system global reconfigurations is guided by command inserting, whereas the simulation of local reconfigurations is automatic because their execution time is computed a priori by a proposed algorithm. Finally, qualitative properties specified by computation tree logic and quantitative analysis regarding energy-efficiency are performed by using the software SESA.     

Experimental study and analysis of the purge gas pressure drop across the pebble beds for the fusion HCPB blanket

The lithium ceramic and beryllium pebble beds of the breeder units (BU), in the fusion breeding blanket, are purged by helium to extract the bred tritium. Therefore, the objective of this study is to support the design of the BU purge gas system by studying the effect of pebbles diameter, packing factor, pebble bed length, and flow inlet pressure on the purge gas pressure drop. The pebble bed was formed by packing glass pebbles in a rectangular container (56 mm × 206 mm × 396 mm) and was integrated into a gas loop to be purged by helium at BU-relevant pressures (1.1–3.8 bar). To determine the pressure drop across the pebble bed, the static pressure was measured at four locations along the pebble bed as well as at the inlet and outlet locations. The results show: (i) the pressure drop significantly increases with decreasing the pebbles diameter and slightly increases with increasing the packing factor, (ii) for a constant inlet flow velocity, the pressure drop is directly proportional to the pebble bed length and inlet pressure, and (iii) predictions of Ergun's equation agree well with the experimental values of the pressure drop.     

Almost All Right: Vienna's Social Housing Provision

The aim of social housing is to manage scarcity by providing affordable accommodation for everyone. Responding to shifts in demand, it also has to adapt to ever-changing economic, political and social conditions. Here, Andreas Rumpfhuber, Michael Klein and Georg Kolmayr look at Vienna's social housing provision, which for over a century has been ‘dealing with scarcity and its ghosts in order to avoid its negative effects’.     

Identification of ozonation by-products of 4- and 5-methyl-1H-benzotriazole during the treatment of surface water to drinking water

During the treatment of surface water to drinking water, ozonation is often used for disinfection and to remove organic trace substances, whereby oxidation by-products can be formed. Here we use the example of tolyltriazole to describe an approach for identifying relevant oxidation by-products in the laboratory and subsequently detecting them in an industrial-scale process. The identification process involves ozonation experiments with pure substances at laboratory level (concentration range mg L⁻¹). The reaction solutions from different ozone contact times were analyzed by high performance liquid chromatography - quadrupole time-of-flight mass spectrometry (HPLC-QTOF-MS) in full scan mode. Various approaches were used to detect the oxidation by-products: (i) target searches of postulated oxidation by-products, (ii) comparisons of chromatograms (e.g., UV/VIS) of the different samples, and (iii) color-coded abundance time courses (kinetic) of all detected compounds were illustrated in a kind of a heat map. MS/MS, H/D exchange, and derivatization experiments were used for structure elucidation for the detected by-product. Due to the low contaminant concentrations (ng L⁻¹-range) of contaminants in the untreated water, the conversion of results from laboratory experiments to an industrial-scale required the use of HPLC-MS/MS with sample enrichment (e.g., solid phase extraction.) In cases where reference substances were not available or oxidation by-products without clear structures were detected, reaction solutions from laboratory experiments were used to optimize the analytical method to detect ng L⁻¹ in the samples of the industrial processes. We exemplarily demonstrated the effectiveness of the methodology with the industrial chemicals 4- and 5-methyl-1H-benzotriazole (4- and 5-MBT) as an example. Moreover, not only did we identify several oxidation by-products in the laboratory experiments tentatively, but also detected three of the eleven reaction products in the outlet of the full-scale ozonation unit.     

Improved absorption characteristics of thermally modified beech veneer produced by plasma treatment

In this study the effect of an atmospheric pressure plasma treatment by a dielectric barrier discharge (DBD) on the wettability and absorption characteristics of thermally modified beech veneer is investigated. A common immersion test using water and melamine solution has been conducted and showed improved wettability and liquid uptake after plasma treatment. Determination of the weight percent gain (WPG) confirmed increased melamine content after plasma treatment.     

采用多机实时立体匹配法在GPU上实现3D重建

摘译立体匹配是一种从两幅或多幅2D图像中计算捕获对象或场景等深度信息的技术。其可广泛应用于多种领域,如遥感、机器人学、考古学、文化遗产、逆向工程和三维人脸识别等。它是唯一可产生深度信息的被动方法,意味着不会与目标物之间产生相互作用,只使用自然光进行数据采集。     

Photocatalytic Composites of Silicone Nanofilaments and TiO2 Nanoparticles

Nanoscale TiO₂ photocatalysts are key materials for convenient wastewater treatment and other essential cleaning processes. Immobilization of TiO₂ nanoparticles (NPs) is thus indispensable for the facile handling and separation of nanocatalysts as well as for minimizing their potential health and environmental hazards. Silicone nanofilaments are introduced as a new flexible carrier type for titania NPs because they are compatible with a wide range of substrates and they display high chemical stability. TiO₂‐NPs are deposited on glass slides covered with thin carpets of silicone nanofilaments in a single reaction step starting from TiF₄ and optimized ethanol/water ratios. The resulting composites are characterized using a wide range of electron microscopy and other analytical techniques, and their photocatalytic activity in the decomposition of methylene blue (MB) is superior to immobilized TiO₂ references on plain substrates.