Aplysia sea hare assimilation of secondary metabolites from brown seaweed,Stypopodium zonale

JuvenileAplysia dactylomela were found feeding in abundance on the tropical brown algaStypopodium zonale, a seaweed previously shown to contain numerous unique terpene-quinone natural products. Lipid extracts of these herbivorous mollusks were shown by TLC and HPLC-NMR analyses to contain appreciable quantities of twoS. zonale metabolites as well as one new but closely related compound. Spectroscopic analyses of the new compound in concert with functional group modifications identified this new compound as 3-keto epitaondiol. A careful analysis of the seaweed extract failed to locate this ketone, and thus, it most likely represents anAplysia-biotransformed compound. This is the first clear reported observation of metabolite transfer between an alga of the phylum Phaeophyta and a sea hare.     

Fractal Characteristics of Fracture Surfaces

Quantitative fractography is often used to study material failure mechanisms. During calculation of surface or profile roughness parameters, the magnification used in obtaining fractographic data is found to influence the value of the parameters. Fractal geometry has been developed into a tool capable of defining surface and profile topography without sensitivity to magnification, and several studies have related fractal dimension ( D _F) to other physical or mechanical properties. In this study, we obtained the fractal dimension of profiled fracture surfaces of one glass and three proprietary dental porcelains. The fracture toughness ( K _1c) of these materials was also measured using the indentation-strength method. Results show the surfaces to be fractal. No quantitative relationship between fractal dimension and toughness was found. Differences in K _1c were demonstrated between some materials. It is postulated that the size range within which fractal dimension can be defined as constant is dependent on the toughening mechanism, and that the relationship between K _Ic and D _F cannot be identical for all materials.     

Thermodynamic study of polymer–solvent systems by reversed-flow gas chromatography

Reversed-flow gas chromatography, a new method for studying heterogeneous catalysis, diffusion, adsorption, evaporation, and other related phenomena, is now applied to the determination of activity of the solvent in a polymer–solvent system in the whole range of polymer concentration, as well as for the calculation of excess partial molar thermodynamic functions of mixing. The systems used were polystyrene in cyclohexane, polyvinylacetate in cyclohexanone and polyvinylpyrrolidone in methanol. In the first system, which was studied in detail, weight fraction activity coefficients (a₁/w₁) at several temperatures (333.8–348.1 K) and various polymer concentrations (0.020–0.131 g/g) were determined. From the latter parameters weight fraction activity coefficients at infinite dilution (a₁/w₁)^∞ were computed. Flory–Huggins interaction parameters x and solubility parameters δ₂ were also determined. Finally, the thermodynamic parameters found by the present method are compared with those determined by other techniques or calculated theoretically.     

Effect of Enameling on the Strength and Dynamic Fatigue of Soda–Lime–Silica Float Glass

The effect of a glass enamel coating on the strength and fatigue behavior of float glass was investigated. Commercially available enamel that was comprised of Cu₂Cr₂O₄ pigment particles in a bismuth-zinc borosilicate glass matrix was applied to a soda–lime–silica float glass via screen printing, followed by fusion at elevated temperature. Strengths of the enameled specimens were evaluated in biaxial flexure using a ring-on-ring (ROR) test geometry, and the data were analyzed using a conventional two-parameter Weibull distribution. Enameling was found to significantly degrade the strength of the float glass. There was no statistical difference in the characteristic strengths of samples enameled on the air side (66 MPa) compared with samples enameled on the tin side (61 MPa) of the float glass. Fractographic analysis revealed that the failures in the enameled float glass samples initiated at pores and pigment aggregates in the enamel, whereas failures in float glass samples initiated solely from surface flaws. Dynamic fatigue tests were performed on enameled float glass and indented float glass samples to determine the effect of the enamel on the stress corrosion behavior of the enameled components. There was no statistically significant difference between the stress corrosion exponents for the float glass and enameled float glass specimens.     

Formation of hydrophilic starch coatings on polyethylene films

Thin starch coatings were deposited onto polyethylene (PE) film surfaces when PE films were immersed in 1% jet cooked starch solutions and the hot solutions were allowed to cool. Normal cornstarch, waxy cornstarch, high amylose cornstarch, and solvent‐extracted normal cornstarch (to remove native lipid) were used in these experiments. Amounts of adsorbed starch varied from about 0.03–0.05 mg per cm² of PE, and these starch coatings imparted hydrophilic properties to film surfaces, as evidenced by contact angle measurements. Although starch could be removed by gently rubbing water‐wet PE surfaces, air‐dried coatings were more firmly attached, and did not separate from the PE surface when films were bent or flexed. SEM images of starch‐coated film surfaces showed that starch was deposited as particles less than 1 μm in diameter, and also as aggregates of these submicron particles. Despite the fact that some starch samples contained only very small amounts of amylose and native lipid, surface‐deposited starch in all experiments contained 90–100% amylose; and exhibited the same V_h X‐ray diffraction pattern, indicative of helical inclusion complex formation. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1781–1788, 2002; DOI 10.1002/app.10589     

Solubility parameters of hydrocarbons

Information available in the literature on vapor pressures, saturated vapor and liquid densities, and critical constants, for different hydrocarbons, has permitted the calculation of δ, the solubility parameter advanced by Hildebrand, at temperatures up to and including the critical point. For these hydrocarbons, the residual quantity, δ-δ_c was found to depend on 1-T_R according to the relationship, where k appears to be a constant within different classes of hydrocarbons. Values of δ calculated with this equation were compared with the corresponding values used to develop it, and produced an average deviation of 0.85% for 153 values considered which represented 17 hydrocarbons.     

A usability evaluation of medical software at an expert conference setting

Introduction

A usability test was employed to evaluate two medical software applications at an expert conference setting. One software application is a medical diagnostic tool (electrocardiogram [ECG] viewer) and the other is a medical research tool (electrode misplacement simulator [EMS]). These novel applications have yet to be adopted by the healthcare domain, thus, (1) we wanted to determine the potential user acceptance of these applications and (2) we wanted to determine the feasibility of evaluating medical diagnostic and medical research software at a conference setting as opposed to the conventional laboratory setting.

Methods

The medical diagnostic tool (ECG viewer) was evaluated using seven delegates and the medical research tool (EMS) was evaluated using 17 delegates that were recruited at the 2010 International Conference on Computing in Cardiology. Each delegate/participant was required to use the software and undertake a set of predefined tasks during the session breaks at the conference. User interactions with the software were recorded using screen-recording software. The ‘think-aloud’ protocol was also used to elicit verbal feedback from the participants whilst they attempted the pre-defined tasks. Before and after each session, participants completed a pre-test and a post-test questionnaire respectively.

Results

The average duration of a usability session at the conference was 34.69 min (SD = 10.28). However, taking into account that 10 min was dedicated to the pre-test and post-test questionnaires, the average time dedication to user interaction of the medical software was 24.69 min (SD = 10.28). Given we have shown that usability data can be collected at conferences, this paper details the advantages of conference-based usability studies over the laboratory-based approach. For example, given delegates gather at one geographical location, a conference-based usability evaluation facilitates recruitment of a convenient sample of international subject experts. This would otherwise be very expensive to arrange. A conference-based approach also allows for data to be collected over a few days as opposed to months by avoiding administration duties normally involved in laboratory based approach, e.g. mailing invitation letters as part of a recruitment campaign.Following analysis of the user video recordings, 41 (previously unknown) use errors were identified in the advanced ECG viewer and 29 were identified in the EMS application. All use errors were given a consensus severity rating from two independent usability experts. Out of a rating scale of 4 (where 1 = cosmetic and 4 = critical), the average severity rating for the ECG viewer was 2.24 (SD = 1.09) and the average severity rating for the EMS application was 2.34 (SD = 0.97). We were also able to extract task completion rates and times from the video recordings to determine the effectiveness of the software applications. For example, six out of seven tasks were completed by all participants when using both applications. This statistic alone suggests both applications already have a high degree of usability. As well as extracting data from the video recordings, we were also able to extract data from the questionnaires. Using a semantic differential scale (where 1 = poor and 5 = excellent), delegates highly rated the ‘responsiveness’, ‘usefulness’, ‘learnability’ and the ‘look and feel’ of both applications.

Conclusion

This study has shown the potential user acceptance and user-friendliness of the novel EMS and the ECG viewer applications within the healthcare domain. It has also shown that both medical diagnostic software and medical research software can be evaluated for their usability at an expert conference setting. The primary advantage of a conference-based usability evaluation over a laboratory-based evaluation is the high concentration of experts at one location, which is convenient, less time consuming and less expensive.     

Design of responsive double-hydrophilic A-b-(B-co-C) diblock terpolymers with tunable thermosensitivity

Double-hydrophilic poly[(oligo(ethylene glycol) methacrylate)-co-methyl methacrylate]-b-poly(2-(diethylamino)ethyl methacrylate), P(EGMA-co-MMA)-b-PDEA, diblock terpolymers were designed and explored in aqueous media. Thanks to the thermosensitivity of the P(EGMA-co-MMA) statistical block and the pH sensitivity of the PDEA block, these terpolymers form two distinct micellar self-assemblies at different conditions of pH and temperature. The thermosensitivity of these terpolymers can be tuned by controlling the LCST of the statistical block through its monomer unit composition.     

Surface‐initiated atom transfer radical polymerization from Mg(OH)2 nanoparticles to prepare the well‐defined polymer‐Mg(OH)2 nanocomposites

Well‐defined polymer‐Mg(OH)₂ nanocomposites were prepared by atom transfer radical polymerization (ATRP). The ATRP initiators were covalently attached to the Mg(OH)₂ by esterification of 2‐chloropropionyl chloride with hydroxyl group. The amount of polymer grafted from Mg(OH)₂ can be controlled using a different catalyst system and adding a small amount of polar solvent. The well‐defined diblock copolymer, consisting of poly(styrene) (PS) and poly(methyl methacrylate) (PMMA) were synthesized. The products were characterized by nuclear magnetic resonance, Fourier transform infrared, differential scanning calorimetry, and thermal gravimetric analysis. The morphologies of PS/PMMA and PS/PMMA/Mg(OH)₂‐g‐PS‐b‐PMMA blends are compared by using a scanning electron microscope. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3680–3687, 2007     

Effect of dopants on the performance of CuO–CeO2 catalysts in methanol steam reforming

Steam reforming of methanol was carried out over a series of doped CuO–CeO₂ catalysts prepared via the urea–nitrate combustion method. XRD analysis showed that at least part of the dopant cations enter the ceria lattice. The addition of various metal oxide dopants in the catalyst composition affected in a different way the catalytic performance towards H₂ production. Small amounts of oxides of Sm and Zn improved the performance of CuO–CeO₂, while further addition of these oxides caused a decrease in catalyst activity. XPS analysis of Zn- and Sm-doped catalysts showed that increase of dopant loading leads to surface segregation of the dopant and decrease of copper oxide dispersion. The addition of oxides of La, Zr, Mg, Gd, Y or Ca lowered or had no effect on catalytic activity, but led to less CO in the reaction products. Noble-metal modified catalysts had slightly higher activity, but the CO selectivity was also significantly higher.