Grating lobes caused by parallel-plate polariser

An unexpected high-level sidelobe was encountered when a parallel-plate polariser was fitted to a slotted waveguide array. The phenomenon is explained using grating lobe theory and linear near-field measurements. A technique to suppress the grating lobe is proposed.     

Variation of nitric oxide concentration during inspiration

OBJECTIVE: To evaluate the pattern of inspiratory nitric oxide concentration in a simple, constant flow delivery system during the use of two phasic-flow ventilatory modes. DESIGN: Laboratory study in a lung model. SETTING: University experimental laboratory. SUBJECT: Nitric oxide (800 ppm in nitrogen) was administered continuously into the inspiratory circuit to deliver a nitric oxide concentration of 10 and 40 ppm to a test lung during volume-controlled (constant flow) and pressure-controlled (decelerating flow) ventilation, with an FIO2 of 1.0. INTERVENTIONS: In each mode, minute ventilation of 7, 14, and 21 L/min and installation of mixing chambers (none, 1-L, 2-L, and 3.2-L turbulence boxes) were studied, respectively. Nitric oxide and nitric dioxide were monitored by chemiluminescence. Since the nitric oxide/nitrogen gas is the only nitrogen source in the system during ventilation with an FIO2 of 1.0, we evaluated the fluctuation in the inspiratory nitric oxide (NOx) concentration by measuring nitrogen with a fast-response analyzer. To test the effect of the measurement site, we measured nitric oxide concentrations using chemiluminescence at different positions in the inspiratory and expiratory limbs, with and without the mixing chambers, with a minute ventilation of 14 L/min and a nitric oxide concentration of 40 ppm. MEASUREMENTS AND MAIN RESULTS: Nitrogen dioxide production was not influenced by the flow pattern. During a nitric oxide concentration of 10 ppm, nitrogen dioxide was always < 0.6 ppm. During a nitric oxide concentration of 40 ppm, the highest nitrogen dioxide (4.47 ppm) concentration was found at the lowest minute ventilation and the largest inspiratory circuit volume. Nitric oxide values displayed by chemiluminescence indicated stable concentrations at all settings. However, without mixing chambers, NOx concentration calculated from nitrogen measurements demonstrated marked inspiratory fluctuations and was highest with a minute ventilation of 21 L/min and higher during pressure-controlled ventilation compared with volume-controlled ventilation (nitric oxide concentration of 40 ppm, pressure-controlled ventilation: 14.5 to 130.5 ppm; volume-controlled ventilation: 21.6 to 104.7 ppm; nitric oxide concentration of 10 ppm, pressure-controlled ventilation: 3.2 to 30.9 ppm; volume-controlled ventilation: 4.5 to 27.1 ppm). NOx concentration fluctuation decreased with an increasing mixing chamber, and was negligible at all settings with the 3.2-L turbulence box. Nitric oxide concentration fluctuation influenced chemiluminescence measurements. The displayed nitric oxide values varied, depending on the sampling site, and did not accurately reflect mean inspiratory nitric oxide concentration. Incorporation of a mixing chamber eradicated this sampling site influence. CONCLUSIONS: Continuous flow delivery of nitric oxide into the circuit of a phasic-flow ventilator results in marked inspiratory nitric oxide concentration fluctuation that is not detected by a slow-response chemiluminescence analyzer. Moreover, nitric oxide concentration fluctuation can influence the accuracy of the chemiluminescence measurements. These effects can be diminished by using additional mixing chambers to facilitate a stable gas concentration. As these mixing volumes increase the contact time of nitric oxide with oxygen, an increase of nitrogen dioxide has to be taken into account.     

An Evaluation of Tricalcium Phosphate Excipients Particularly Using Instrumented Rotary and Single Station Tablet Presses

Two direct compression grades of tricalcium phosphate, Tri-Compress^R (Edward Mendell Co., Inc.) and Tri-Tab^R (Stauffer Chemical Co.), and a product containing tricalcium phosphate, D locust bean gum and citric acid, Loco-Tab^R (Ingredient Technology Corp.), were studied. Loco-Tab is composed of smaller particles having more irregularly shaped surfaces than the others. It is also less dense and somewhat less flowable than the other materials. None of these excipients lost weight at elevated temperature and none can be considered to be hygroscopic. Compressibility in formulations was studied using instrumented rotary and single station tablet presses. In all cases, the single station press yielded harder tablets at a given compression force. Dissolution of an insoluble drug was affected to a degree by the press used. Drug dissolution from Loco-Tab formulations was excellent at all tablet hardnesses, a highly desirable property for tablets to be coated using fluidized bed equipment. Loco-Tab would seem to be the calcium phosphate excipient of choice while recognizing that it is not a single entity and that it is acidic, in contrast to the neutral to slightly basic pH of the others.     

String sorting technique for microcomputers

This paper reports the development of a sorting algorithm, called a ‘pocket sort.’ It is primarily directed to sorting of character data. The algorithm is strictly of order O(n); sorting time is directly proportional to the number of data elements to be sorted. Further, through the use of pointer - linked list data structures, no internal movement of the records containing the sort field is required. The algorithm has been implemented in Turbo Pascal. Data are presented comparing this pocket sort to other sorting techniques.     

Learning disabled and normal college students' performance on reaction time and speeded classification tasks.

Examined the efficiency with which 24 learning-disabled (LD [mean Wechsler Adult Intelligence Scale—Revised Full-Scale IQ 105.04]) and 24 non-learning-disabled (NLD) college students performed basic cognitive-processing tasks. A simple visual reaction time (RT) and 3 speeded classification tasks were used. Results indicate that the LD Ss were slower and more variable on the speeded classification tasks than were the NLD Ss; however, the 2 groups did not differ on the simple visual RT task. Findings suggest that the deficits in higher cognitive processing found in younger LD children persist into early adulthood. It is argued that this failure to automatize very basic subskills may relate to central nervous system (CNS) dysfunction among the LD. (34 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Nanofibers from recycle waste expanded polystyrene using natural solvent

Summary A new recycling technique has been developed. In this method, EPS (expanded polystyrene), generally called Styrofoam, is dissolved with natural solvent, d-limonene and electrospun. This method can economically produce the nanofibers. The electrospinning process produces a nonwoven mat of long polymer fibers with diameters in the range of 10–500 nm and high surface areas per unit mass. PS (Polystyrene) polymer dissolved in different solvents such as THF (Tetrahydrofuran), DMF (Dimethylformaide), and DMAc (Dimethylacetamide) etc. may all be electrospun into nanofibers. These solvents cause environmental problem and difficulty of process handling. Natural solvent, d-limonene is used for dissolving PS. PS nanofibers are produced with PS solution using d-Limonene. This paper describes the use of polystyrene (PS) nanofibers electrospun from recycled EPS solution dissolved in d-limonene. The electrospun polystyrene nanofiber diameters vary from 300 to 900 nm, with an average diameter of about 700 nm.     

The RAISE language,method and tools

This paper presents the RAISE¹ software development method, its associated specification language, and the tools supporting it. The RAISE method enables the stepwise development of both sequential and concurrent software from abstract specification through design to implementation. All stages of RAISE software development are expressed in the wide-spectrum RAISE specification language. The RAISE tools form an integrated tool environment supporting both language and method.The paper surveys RAISE and furthermore, more detailed presentations of major RAISE results are provided. The subjects of these are (a) an example of the use of the RAISE method and language, and (b) a presentation of the mathematical semantics of the RAISE specification language.