The unsteady-state thermohydraulic calculation of a stacked core

NIKIÉT. Translated from Atomnaya Énergiya, Vol. 75, No. 4, pp. 265-269, October, 1993.     

The solubility of tungsten in molten iron

The solubility of tungsten in iron has been determined at 1560–1620°C by successively saturating molten iron with tungsten while ensuring a uniform distribution of the content over the height. The temperature dependence of the solubility over that temperature range is described by a Schröder equation: C_s=(3.94±0.11)×10³e-(84.4±0.4)/RT.     

Void fraction and pressure drop in two-phase liquid metal flows in channels

Experimental results on void fraction and friction pressure drop in vapour-potassium flows in the high-vapour-quality region up to unity are presentéd. The experimental data obtained and the pertinent results of other authors are generalized, and empirical relationship are suggested to calculate void fraction and pressure drop in two-phase liquid metal flows for channels of various configurations and orientations. The relationships are valid within the range of vapour qualities from almost zero to unit. The experimental data prove the mass velocity to have no influence on the hydrodynamic characteristics within the range of the parameters investigated. It is found in the experiments with heat supply that friction pressure losses are smaller than those for adiabatic conditions. It is shown that this result is in good correspondence with the model of the effect of injection in a boundary layer on the value of shear stresses between cases.     

Investigations of a two-wave laser refractometer

A two-wave laser interference refractometer for measuring the refractive index of air, pure gases, and gaseous mixtures is described. An algorithm for calculating the results of measurements using the method of coincidence of fractional parts of the orders of interference is given.Translated from Izmeritel'naya Tekhnika, No. 7, pp. 29–31, July, 1993.     

Numerical investigation of nitriding of refractory metals (with account of the phase constitution diagrams for metal-gas systems)

A mathematical model of dissolution of gas in a metal is suggested with account of phase formation in accordance with the phase constitution diagram (PCD). The stage-by-stage saturation process to the final product formation is shown for an individual particle, through which a reaction wave passes, depending on the diffusion permeability of the metal and solubility conditions that obey Sieverts's law. The effect of the filtration supply of the oxidant to the reaction zone and the process exothermicity on the course of the process is shown.Institute of Structural Macrokinetics, Russian Academy of Sciences, Chernogolovka, Russia. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 65, No. 4, pp. 447–450, October, 1993.     

Solar/UV-induced photocatalytic degradation of three commercial textile dyes.

The photocatalytic degradation of three commercial textile dyes with different structure has been investigated using TiO(2) (Degussa P25) photocatalyst in aqueous solution under solar irradiation. Experiments were conducted to optimise various parameters viz. amount of catalyst, concentration of dye, pH and solar light intensity. Degradation of all the dyes were examined by using chemical oxygen demand (COD) method. The degradation efficiency of the three dyes is as follows: Reactive Yellow 17(RY17) > Reactive Red 2(RR2) > Reactive Blue 4 (RB4), respectively. The experimental results indicate that TiO(2) (Degussa P25) is the best catalyst in comparison with other commercial photocatalysts such as, TiO(2) (Merck), ZnO, ZrO(2), WO(3) and CdS. Though the UV irradiation can efficiently degrade the dyes, naturally abundant solar irradiation is also very effective in the mineralisation of dyes. The comparison between thin-film coating and aqueous slurry method reveals that slurry method is more efficient than coating but the problems of leaching and the requirement of separation can be avoided by using coating technique. These observations indicate that all the three dyes could be degraded completely at different time intervals. Hence, it may be a viable technique for the safe disposal of textile wastewater into the water streams.     

Analytical Calculation of Large-Scale Deflection of Pulse-Loaded Elliptic Plates

Large deflections of pulse-loaded elliptic and round plates made of hardenable elastoplastic materials are investigated analytically using an energy-based approach. Formulas that are convenient for engineering design have been derived.     

Makespan estimation and order acceptance in batch process industries when processing times are uncertain

Batch process industries are characterized by complex precedence relationships between operations, which renders the estimation of an acceptable workload very difficult. A detailed schedule based model can be used for this purpose, but for large problems this may require a prohibitive large amount of computation time. We propose a regression based model to estimate the makespan of a set of jobs. We extend earlier work based on deterministic processing times by considering Erlang-distributed processing times in our model. This regression-based model is used to support customer order acceptance. Three order acceptance policies are compared by means of simulation experiments: a scheduling policy, a workload policy and a regression policy. The results indicate that the performance of the regression policy can compete with the performance of the scheduling policy in situations with high variety in the job mix and high uncertainty in the processing times. Correspondence to: C.V. Ivanescu     

Mesh data structure selection for mesh generation and FEA applications

The data structure representing a mesh and the operators to create and query such a database play a crucial role in the performance of mesh generation and FE analysis applications. The design of such a database must balance the conflicting requirements of compactness and computational efficiency. In this article, 10 different mesh representations are reviewed for linear tetrahedral and hexahedral meshes. A methodology for calculating the storage and computational costs of mesh representations is presented and the 10 data structures are analysed. Also, a system for ranking different data structures based on their computational and storage costs is devised and the various mesh representations are ranked according to this measure. Copyright © 2002 John Wiley & Sons, Ltd.