In-Situ Analyzing the Influence of Thermoelectromagnetic Convection on the Nucleation Ahead of the Advancing Interface During Directional Solidification

Sn-3wt%Pb alloy was directionally solidified without and with a 0.08T transverse magnetic field(TMF),and real-time recorded by in-situ synchrotron X-ray imaging.Results indicate that TMF shortened the distance from the location of nucleation to the advancing interface,and accelerated the growth rate of the equiaxed crystal,which caused the columnar-to-equiaxed transition(CET)finally.The thermoelectromagnetic convection(TEMC)in front of the interface and around the crystal’s dendritic branch should respond to changes of the distance and the growth rate.     

Cyclic invariance for discrete time-delay systems

This technical communique introduces a new concept of set invariance with respect to linear discrete time dynamics affected by delay. We are interested in the definition and characterization of sequences of cyclically invariant subsets in the state space. The algebraic conditions established in the late ’80s for linear dynamics are generalized to invariance analysis in the presence of delays for given sequences of polyhedral sets.     

Granulometry,cluster analysis and spatial distribution of manganese contaminated soils,Kgwakgwe, southeastern Botswana

The particle size distribution (PSD) of 400 Mn contaminated soil samples was established, and generated data were statistically analysed and spatially presented. The PSD for the 53 µm – 4 µm size fraction soil samples ranged from 11.05 to 100 wt %, whereas that for < 4 µm was from 0.3 to 30 wt %. Texturally, samples were dominantly silt loam, although silt and sandy loam were also present, as well as loam, loamy sand and clay classes. Six clusters were identified with cluster one being the most dominant occurring in sandy loam, silt loam and loamy sand. The < 53 µm fraction had three dominant areas, and the < 4 µm fraction had several unevenly presented populations as reflected in the maps. Because of its spatial distribution, the < 4 µm fraction may pose hazards to human health. Furthermore, predominance of Mn limits land use to subsistence agriculture with possibly low crop yield.     

Development of blown film linear low-density polyethylene–clay nanocomposites: Part A: Manufacturing process and morphology

In this study, linear low-density polyethylene (LLDPE)/clay nanocomposites with different clay contents were prepared by melt intercalation using two different compatibilizers: maleic anhydride grafted styrene–ethylene–butylene–styrene and maleic anhydride grafted polyethylene (PE-g-MA). Melt intercalation was achieved by twin extrusion and nanocomposite films were produced by blown film extrusion. Effects of clay and compatibilizer fractions and type of compatibilizer on the structure, permeability, and the barrier properties of the nanocomposite films were investigated. PE-g-MA was shown to notably improve the dispersion of clay layers in the polyethylene matrix, and this was examined by atomic force microscopy and X-ray diffraction. The latter tests have also highlighted the importance of the screw configuration: the presence of mixing elements favors the dispersion and distribution of nanoclay. Moreover, differential scanning calorimetry results have shown no significant effect of the clay on the crystallinity of the composite while thermogravimetric analysis tests have demonstrated a decrease of onset and peak of decomposition temperatures. Finally, barrier properties toward water vapor transmission were measured. It was proven that not also clay, but the compatibilizer participated in decreasing the permeability of the film. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48589.     

Microtribology,squeeze, and friction of the colloidal layer

Lubricant films containing colloidal overbased calcium salts have particular effects on detergency and on the wear process. The mechanical properties of such boundary films are very dependent on the process conditions, and are essentially a result of physico-chemical transformations of the colloid. Three types of films were compared: a film obtained by the drying of the base solvent, a film due to the compaction of the colloid between two steel surfaces, and a friction film obtained with this type of lubricant. Adsorption, compaction, and shear transformations induce a solid film. The pressure effect on the frictional behaviour of these colloidal films has been investigated using a surface force apparatus for low contact pressure (10⁴ to 10⁶ Pa), and using tribometers supporting heavy loads for the analysis of the high pressure domain. Above a critical pressure, evaluated at 10⁶ Pa, the colloidal film does not flow, but forms a compacted mattress sliding on the surface plane and squeezing a molecular layer of lubricant.     

A continuous-time delta-sigma modulator for 802.11a/b/g WLAN implemented with a hierarchical bottom-up optimization methodology

This paper presents a 3rd-order continuous-time Delta-Sigma modulator with a resolution of 10 bits for a 10 MHz signal bandwidth. It is designed in a standard 0.18 μm CMOS technology and consumes only 6 mW. After the design/selection of the topologies for the integrators, comparator and D/A converters, optimal sizing of the complete modulator was ensured by using a hierarchical bottom-up, multi-objective evolutionary design methodology. With this methodology, a set of Pareto-optimal modulator designs is generated by using Pareto-optimal performance solutions of the hierarchically decomposed lower-level subblocks. From the generated Pareto-optimal design set, a final optimal design is chosen that complies with the specifications for the 802.11a/b/g WLAN standard and has minimal power consumption.     

A New Design Paradigm for Smart Windows: Photocurable Polymers for Quasi‐Solid Photoelectrochromic Devices with Excellent Long‐Term Stability under Real Outdoor Operating Conditions

A new photoelectrochromic device (PECD) is presented in this work proposing the combination of a WO₃‐based electrochromic device (ECD) and a polymer‐based dye‐sensitized solar cell (DSSC). In the newly designed architecture, a photocurable polymeric membrane is employed as quasi‐solid electrolyte for both the ECD and the DSSC. In addition, a photocurable fluoropolymeric system is incorporated as solution‐processable external protective thin coating film with easy‐cleaning and UV‐shielding functionalities. Such new polymer‐based device assembly is characterized by excellent device operation with improved photocoloration efficiency and switching ability compared with analogous PECDs based on standard liquid electrolyte systems. In addition, long‐term (>2100 h) stability tests under continuous exposure to real outdoor conditions reveal the remarkable performance stability of this new quasi‐solid PECD system, attributed to the protective action of the photocurable fluorinated coating that effectively prevents photochemical and physical degradation of the PECD components during operation. This first example of quasi‐solid PECD systems paves the way for a new generation of thermally, electrochemically, and photochemically stable polymer‐based PECDs, and provides for the first time a clear demonstration of their true potential as readily upscalable smart window components for energy‐saving buildings.     

An automatic node relabelling scheme for minimizing a matrix or network bandwidth

An automatic algorithm is presented for reducing the bandwidth of symmetric sparse connectivity matrices. The procedure takes an arbitrary input sequence and creates an optimal bandwidth for complex network systems by renumbering the node labels. Thus, considerable improvement for computer storage and time is achieved in the solution of the systems. A large number of examples is presented to demonstrate the reliability and the efficiency of the method.     

Impact of social externalities on the formation of an international environmental agreement: an exploratory analysis

We analyze the impact of social externalities (SEs) on the stability of an international environmental agreement (IEA). We consider a framework in which players are divided into two homogeneous groups, namely, developed and developing countries. We assume that members of an IEA get some additional benefits, to which we refer as SEs. One main result is that any coalition that is internally stable will expand to include all countries, which is related to the minimum participation clause considered in some papers. However, our minimum, which is endogenously defined, is not the largest stable coalition size, but the grand coalition.