A comparison of SWAT, HSPF and SHETRAN/GOPC for modelling phosphorus export from three catchments in Ireland

Recent extensive water quality surveys in Ireland revealed that diffuse phosphorus (P) pollution originating from agricultural land and transported by runoff and subsurface flows is the primary cause of the deterioration of surface water quality. P transport from land to water can be described by mathematical models that vary in modelling approach, complexity and scale (plot, field and catchment). Here, three mathematical models (soil water and analysis tools (SWAT), hydrological simulation program-FORTRAN (HSPF) and système hydrologique Européen TRANsport (SHETRAN)/grid oriented phosphorus component (GOPC)) of diffuse P pollution have been tested in three Irish catchments to explore their suitability in Irish conditions for future use in implementing the European Water Framework Directive. After calibrating the models, their daily flows and total phosphorus (TP) exports are compared and assessed. The HSPF model was the best at simulating the mean daily discharge while SWAT gave the best calibration results for daily TP loads. Annual TP exports for the three models and for two empirical models were compared with measured data. No single model is consistently better in estimating the annual TP export for all three catchments.     

Influence of Tempering Temperature on Cyclic Viscoplastic Behaviour of 55NiCrMoV7 Steel

Low cycle fatigue behaviour of a steel 55NiCrMoV7 under tour tempered conditions is reported. One special type of total swain controlled isothermal cyclic deformation tests were performed in the temperature range 20℃ to 600℃ for the steel tempered 2h at 350℃, 460℃, 560℃ and 600℃. The influence of temperature on cyclic behaviour was investigated. Generally, the cyclic stress response shows an initial exponential softening for the first few cycles, followed by a gradual softening without cyclic softening saturatioo. At 10^-2 strain rate, σmax.Δσ／2 decrease with the test tumperature for all hardness levels. They decrease linearly with tempering temperature when testing temperature is lower than that of tempering, but rest nearly constant when test temperature is equal to or exceed tempering temperature of steel. Cyclic softening intensity increases with testing temperature from 300℃ to 600℃, but the maximal softening intensity occurs at room tumpemture. The strain rate influences notably the cyclic behavioor when T≥50℃, The time dependence of cyclic behaviour is closely related to test temperature and the tempering history of the steel.     

Fundamental study of surface densification of PM gears by rolling using FE analysis

The complex shape of gears is very attractive to the near-net-shape PM technology. The strength of conventional PM parts is reduced by the residual porosity due to the power law relationship between the density and the mechanical properties. The maximum stresses in gears are found in the tooth root and the flank near or directly at the surface, so that by a local densification of the near surface layer the maximum load carrying capacity of the complete gear can be increased. This surface densification can be achieved by a rolling process. Due to the own elastic-plastic behavior of PM materials and due to the continuous change of the contact conditions during rolling, the process is too complex to be described analytically. To gain a better understanding of the process, the numerical simulation is a capable method. In this paper an FEA model is prepared and verified based on an experimental investigation. Additionally, case studies were carried out in order to analyze the relationship between the process parameters and the densification result. The investigations described in this present paper were sponsored by the WZL Gear Research-Circle.     

New methods for calculating the force distribution within belt grinding processes

In order to simulate belt grinding processes (e.g. for process planning or path planning) one usually needs information about the contact zone and contact forces. Typically, an unacceptable computational effort is required for good simulation results, since these contact problems are usually of a nonlinear nature. In this paper, the application of support vector machines (SVM) is presented. The SVM is a learning machine that aims at finding a function that optimally fits given observations. The main advantage of SVM is its fast evaluation during simulation. However, a single training phase with an extensive amount of observation data has to be done once before the simulation can take place. From a practical point of view, it is very often not feasible to sample these observation data by experiments. At this point special Finite element methods for contact problems can be applied very efficiently. In order to obtain as accurate as possible training data, an adaptive finite element method for contact problems has been developed.     

Morphological studies of late-stage spinodal decomposition in polystyrene–cyclohexanol system

We studied the late-stage spinodal decomposition of the polystyrene–cyclohexanol system in relation to membrane formation. Phase separation was effected by the removal of thermal energy from the homogeneous polymer solution. The ultimate morphology of the phase-separated systems has been studied using electron microscopy and has been found to be strongly affected by the quenching time. A shift from a highly interconnected open-cell structure to a closed-cell structure has been observed, indicating the transition of the spinodal decomposition from early to late stages. The cell growth in the late stage has been quantitatively analyzed and a power-law relationship between the cell size and quenching time has been found. The resulting exponent of 0.61 is consistent with literature values from light-scattering measurements, as well as from theoretical derivations. © 1995 John Wiley & Sons, Inc.     

基建仓库

基建仓库项目位于莱瓦顿的Harlingervaart运河岸边,作为周边建筑的仓库,它具有独特的趣味性良好的形体感,因此被认为是立于运河沿岸广场上的一座雕塑。建筑的入口处挑出悬臂,并且顺势突出建筑南侧的体量     

Thermal tolerance of the invasive oyster Crassostrea gigas: feasibility of heat treatment as an antifouling option

Pacific oysters, Crassostrea gigas are traditionally considered shellfish of great fishery and aquaculture value. For these reasons they are introduced worldwide. Recently there has been increasing reports about the prevalence of C. gigas as biofouling organism in cooling water systems. In the absence of relevant data on the susceptibility of oysters to commonly employed antifouling techniques such as heat treatment, it was presumed that oysters would be controlled by treatment programmes directed against other major fouling organisms. The present study was carried out to test the above hypothesis, and results showed that C. gigas has an upper temperature tolerance that is much higher than other major marine fouling animals including blue mussel Mytilus edulis. Apparently, temperature regimes presently used in heat treatment of cooling water systems fouled by mussels need to be increased, if C. gigas are to be controlled effectively. Our results also indicate that previous exposure of C. gigas to sublethal high temperatures could make them more resistant to subsequent thermal treatment, an aspect that should be taken into account when heat treatment is used as a fouling control option against oyster fouling.