Entwicklung eines Flächenschätzverfahrens zur Abschätzung von Bauteilflächen als Grundlage für die energetische Bewertung von Wohngebäuden

Development of a simplified method to estimate the thermal envelope area of residential buildings. A calculation procedure for the estimation of the area of building envelope components has been developed. Based on the statistical evaluation of the data records of more than 4, 000 residential buildings the analyses gave mean values for the area of walls, windows, roofs and cellar ceilings and their dependency of the following basic factors: the area of living space, the number of heated storeys, the number of adjoining buildings. When applying the estimation procedure only these basic factors have to be collected.     

Ultra-fine particles release from hardcopy devices: sources, real-room measurements and efficiency of filter accessories

The release of ultra-fine particles (UFP, d < 0.1 µm) from hardcopy devices such as laser printers into the indoor environment is currently a topic of high concern. The general emission behavior of a printer can be examined by conducting emission test chamber measurements with particle-counting devices. Chamber experiments with modified laser printers operated without toner or paper also revealed UFP emissions. On the basis of these results we reasonably doubt the opinion that UFPs primarily originate from the toner. Instead, the high-temperature fuser unit is assumed to be one source for ultra-fine particle emission. UFP release typically follows the flow path of the cooling air which may leave the printer casing at various points (e.g. the paper tray). This limits the usability of the commercial filter systems available because the released particles could leave the printer without passing through the filter. Chamber measurements with various filter systems retrofitted to a laser printer demonstrate different efficiencies of UFP reduction. Complementary experiments were carried out in an office room. Here the decay of the particle concentration after a print job was about ten times slower than in the test chamber. A toxicological assessment of the emitted particles requires that their chemical composition be known. Due to the low mass of the released UFPs chemical analysis needs a prior enrichment on a feasible media. Experiments using electrostatic precipitation showed a flame retardant (tri-xylyl phosphate) whose concentration on the media was dependent on the number of pages printed. Whether this compound was particle-bound could not be determined.     

Risk Budget management in progressing underground works: International Society for Trenchless Technology (ISTT) and International Tunnelling Association (ITA) Joint Working Group Report

There is a mass of detailed data concerning technical risk assessment methods and practices for underground work. But there is very little advice or guidance on the broad apportionment of the total risk between the various phases of an underground project or general advice on how risk might be managed. The Working Group has produced a generic Risk Budget covering five typical phases of an underground works project, which illustrates the heavy bias of risk towards the early phases. Using a practical example the report illustrates how project risk can be managed in a structured manner.     

Application of bacteria involved in the biological sulfur cycle for paper mill effluent purification

In anaerobic wastewater treatment, the occurrence of biological sulfate reduction results in the formation of unwanted hydrogen sulfide, which is odorous, corrosive and toxic. In this paper, the role and application of bacteria in anaerobic and aerobic sulfur transformations are described and exemplified for the treatment of a paper mill wastewater. The sulfate containing wastewater first passes an anaerobic UASB reactor for bulk COD removal which is accompanied by the formation of biogas and hydrogen sulfide. In an aeration pond, the residual COD_organic and the formed dissolved hydrogen sulfide are removed. The biogas, consisting of CH₄ (80-90 vol.%), CO₂ (10-20 vol.%) and H₂S (0.8-1.2 vol.%), is desulfurised prior to its combustion in a power generator thereby using a new biological process for H₂S removal. This process will be described in more detail in this paper. Biomass from the anaerobic bioreactor has a compact granular structure and contains a diverse microbial community. Therefore, other anaerobic bioreactors throughout the world are inoculated with biomass from this UASB reactor. The sludge was also successfully used in investigation on sulfate reduction with carbon monoxide as the electron donor and the conversion of methanethiol. This shows the biotechnological potential of this complex reactor biomass.     

Influence of ceria coatings on growth stresses developed in wüstite scales formed on pure iron at 800°C

In situ XRD stress determinations have been performed during oxidation of pure iron (p(O₂=2 × 10^–3 Pa,T=800°C)). The compressive stress, initially present in the substrate due to surface preparation, is completely released at 400°C. Under the test conditions, the in situ compressive-stress level determined in the FeO scale during oxidation is not strongly dependent upon the presence of a ceria coating. On blank and coated specimens, the compressive stress varies from –400 ± 80 MPa to –150 ± 100 MPa during 30 hr oxidation. The decrease is quicker at the beginning of the test performed on blank specimens. Epitaxial relationships between the wüstite scale and iron (under low-pressure starting conditions) caused thein situ compressive stress in the oxide scale to be two times greater compared to the usual test conditions. This indicates that epitaxial relationships can be a source of stress in an oxide scale that ceria coatings may lower compressive stresses.     

Mapping of background air pollution at a fine spatial scale across the European Union

Background

There is a need to understand much more about the geographic variation of air pollutants. This requires the ability to extrapolate from monitoring stations to unsampled locations. The aim was to assess methods to develop accurate and high resolution maps of background air pollution across the EU.

Methods

We compared the validity of ordinary kriging, universal kriging and regression mapping in developing EU-wide maps of air pollution on a 1 × 1 km resolution. Predictions were made for the year 2001 for nitrogen dioxide (NO₂), fine particles < 10 µm (PM₁₀), ozone (O₃), sulphur dioxide (SO₂) and carbon monoxide (CO) using routine monitoring data in Airbase. Predictor variables from EU-wide databases were land use, road traffic, population density, meteorology, altitude, topography and distance to sea. Models were developed for the global, rural and urban scale separately. The best method to model concentrations was selected on the basis of predefined performance measures (R², Root Mean Square Error (RMSE)).

Results

For NO₂, PM₁₀ and O₃ universal kriging performed better than regression mapping and ordinary kriging. Validation of the final universal kriging estimates with results from all validation sites gave R²-values and RMSE-values of 0.61 and 6.73 µg/m³ for NO₂; 0.45 and 5.19 µg/m³ for PM₁₀; and 0.70 and 7.69 µg/m³ for O₃. For SO₂ and CO none of the three methods was able to provide a satisfactory prediction.

Conclusion

Reasonable prediction models were developed for NO₂, PM₁₀ and O₃ on an EU-wide scale. Our study illustrates that it is possible to develop detailed maps of background air pollution using EU-wide databases.     

优等品硫磺

对于在储运过程中遇到的某些现实情况,广泛采用的"优等品"硫磺标准并非总是适用的.提出对加拿大硫磺开发研究所1977年公布的《成型固体硫磺优等品质量标准》中的一些指标进行修订.建议在加入SLS之前硫磺的水分质量分数为0.8%～1.8%,硫化氢质量分数小于0.003%.     

Glycerolysis of Fatty Acid Methyl Esters: 1. Investigations in a Batch Reactor

The present work focused on the glycerolysis of fatty acid methyl esters. The aim was to develop and test a kinetic model that could be used to reliably simulate different process alternatives for this reaction. A prerequisite was the identification and characterization of the factors that affect the reaction kinetics. Experiments were carried out in a batch reactor with and without forced removal of methanol, which is one of the reaction products. Concentrations of all components in the two-phase system were measured. It was found that the methanol concentration has a strong effect on the reaction rate and equilibrium conversion. Near-complete conversions were obtained by stripping methanol with an inert gas. The glycerol concentration in the ester phase was found to increase as the reaction proceeds, which also accelerates the reaction. Effects of mass transfer on the reaction rate were not found to control the reaction rate under well-agitated conditions. A semi-empirical model was used to simulate the reaction. The results from the semi-empirical model show good agreement with experimental results.     

Model development and validation: Co-combustion of residual char, gases and volatile fuels in the fast fluidized combustion chamber of a dual fluidized bed biomass gasifier

A one-dimensional steady state model has been developed for the combustion reactor of a dual fluidized bed biomass steam gasification system. The combustion reactor is operated as fast fluidized bed (riser) with staged air introduction (bottom, primary and secondary air). The main fuel i.e., residual biomass char (from the gasifier), is introduced together with the circulating bed material at the bottom of the riser. The riser is divided into two zones: bottom zone (modelled according to modified two phase theory) and upper zone (modelled with core-annulus approach). The model consists of sub-model for bed hydrodynamic, conversion and conservation. Biomass char is assumed to be a homogeneous matrix of C, H and O and is modelled as partially volatile fuel. The exit gas composition and the temperature profile predicted by the model are in good agreement with the measured value.     

Potent inhibitors of the human UDP-glucuronosyltransferase 2B7 derived from the sesquiterpenoid alcohol longifolol

The tricyclic sesquiterpenol (+)-longifolol served as a lead structure for the design of inhibitors of the human UDP-glucuronosyltransferase (UGT) 2B7. Twenty-four homochiral and epimeric longifolol derivatives were synthesized and screened for their ability to inhibit the enzyme. The absolute configuration at the stereogenic center C1' was determined by X-ray crystallography and 2D NMR spectroscopy (gHSQC, gNOESY). The phenyl-substituted secondary alcohol 16 b (beta-phenyllongifolol) displayed the highest affinity toward UGT2B7, and its inhibitory dissociation constant was 0.91 nM. The mode of inhibition was rapidly reversible and competitive. The inhibitor was not glucuronidated by UGT2B7 or other hepatic UGTs, presumably as a result of the high steric demand exerted by the phenyl group. Inhibition assays employing 14 other UGT isoforms suggested that inhibitor 16 b was highly selective for UGT2B7.