Entwicklungslinien der Schüttgutdosiertechnik

Developments in dosage of bulk solids. Dosage of bulk solids is a fast developing field of process- and production automation. Developments are determined directly by the current demands of the production process, with the properties of the bulk solids and the process itself playing an important role. A survey of proven dosage techniques from the viewpoint of the operating principles, properties, applications, and limitations demonstrates the great variety of problem solutions. An important difference between the individual dosage techniques is the nature and accuracy of mass limitation. The most accurate techniques are the gravimetric dosage methods, with discontinuous weighing giving the greatest accuracy. Developments have been greatly influenced by the state of weighing cell techniques, weighing electronics and computer engineering. The development of measured data acquisition and processing of control, and of instrumentation are described, compared, and assessed. A trend towards system responsibility and development on the part of manufacturers is noted. A accurate dosage of bulk solids requires constant flow of the solids and finely adjustable control devices. The principal interferences in bulk solids flow and measures for their avoidance are shown by means of examples. Successful solution of dosage tasks ultimately requires agreement between manufacturers and processors with regard to definition, determination, and control of dosage accuracy during calibration and during long term operation.     

Carotenoid Composition and Vitamin A Values of Oils from Four Brazilian Palm Fruits

In oils extracted from fresh and sterilized palm fruits (Elaeis guineensis, Jacq. tenera, dura dumpy and psifera and E. oleifera), cis-phytofluene, 13-cis-α-carotene, α-carotene, 13-cis-β-carotene, β-carotene, 9-cis-β-carotene, σ-carotene, zeaxanthin, --cryptoxanthin, poly-cis-lycopene, mono-lycopene and lycopene, were identified and quantified by normal phase open column chromatography (stepwise-elution), TLC, UV/Vis spectroscopy and specific chemical reactions. The sum of α- and β-carotene in all samples analysed was higher than 80% of the total carotenoid content, while the α/β-carotene ratios were W.9, 1/11.1, 1/22 and V2.6 for oils extracted from fresh fruits of dura dumpy, psifera, tenera and E. oleifera, respectively. Total carotenoid contents (pg/g) and vitamin A values (R. E./100 g) of these samples were 1 120.7 and 12 404 for dura dumpy, 283.2 and 3612 for psifera, 660.5 and 7630 for tenera and 1576.8 and 21691 for E. oleifera. The sterilization of fruits (127°C × 35 min.) resulted in isomerization of pigments and reduction of vitamin A values of approximately 45% and 25%, respectively.     

Dispersion of homogeneous and inhomogeneous waves in the Yeefinite-difference time-domain grid

The numerical dispersion relation governing the propagation of homogeneous plane waves in a finite-difference time-domain (FDTD) grid is well known. However, homogeneous plane waves, by themselves, do not form a complete basis set capable of representing all valid field distributions. A complete basis set is obtained by including inhomogeneous waves, where, in the physical world, constant phase planes must be orthogonal to constant amplitude planes for lossless media. In this paper, me present a dispersion analysis for both homogeneous and inhomogeneous plane waves in the Yee FDTD grid. We show that, in general, the constant amplitude and constant phase planes of inhomogeneous plane waves are not orthogonal, but they approach orthogonality for fine discretization. The dispersion analysis also shows that, for very coarsely resolved fields, homogeneous waves will experience exponential decay as they propagate and they may propagate faster than the speed of light. Bounds are established for the speed of propagation within the grid, as well as the highest frequency and the shortest wavelength that can be coupled into the grid. Analysis is restricted to the classic Yee algorithm, but a similar approach can be used to analyze other time-domain finite-difference methods     

Template‐Confined Dewetting Process to Surface Nanopatterns: Fabrication,Structural Tunability,and Structure‐Related Properties

Metallic surface nanopatterns are prepared by a template‐confined dewetting process with multiple structural controllabilities. The morphology of the building blocks is homogeneous throughout the surface nanopatterns, as the dewetting process proceeds separately in each bowl. The features of the building units in the surface patterns are highly dependent on the annealing temperature. Importantly, the size and composition of the nanoparticles in the surface nanopatterns can be pre‐calculated and designed by manipulating the thickness of the evaporated metallic films. The heating temperature and composition of the building units influence the surface‐enhanced Raman scattering (SERS) and plasmonic properties, thus tuning the localized surface plasmon resonance peaks over a broad range (from visible to near infrared). The introduction of silver in the gold surface nanopatterns enhances the SERS performance dramatically. This work not only provides a powerful route to fabricate surface nanopatterns, but also supplies a platform to study the mechanism of the complicated dewetting processes of metals.     

An automatic nonrigid registration for stained histological sections.

Automatic computer-based analyses of histological sections which are differently stained require that they are related to each other. Most registration methods are only able to perform rigid-body motion and are sensitive to noise and artifacts. Histological images, however, are accompanied by several artifacts and different contrasts, which require a nonrigid registration. In this paper, we present a hierarchical nonrigid registration algorithm able to align images, which contain minor image artifacts. The algorithm requires no a priori knowledge of the true image. The hierarchical design of the algorithm enhances robustness and accuracy, and saves computational costs. The proposed algorithm is decomposed into a fast, coarse, rigid registration step and a slower, but finer, nonrigid step. For the coarse registration, we use image pyramids, while for the second step, we combine a point-based registration with an elastic thin-plate spline interpolation. Accuracy tests, performed for 20 histological images obtained from human arteries, have shown that the error measure is acceptable, and that the image noise does not cause a problem. The associated convergence rate of the mean pixel displacement error during the rigid and nonrigid registrations is satisfying. The algorithm can be applied to various multicontrast elastic registration problems in medical imaging and may be extended to three dimensions.     

Visible (660 nm) resonant cavity light-emitting diodes

The demonstration of the first visible resonant cavity light-emitting diodes (RCLEDs) is reported. The devices consist of an InAlGaP strained quantum well active region surrounded by AlAs/AlGaAs distributed Bragg reflectors. Linewidths from 0.9 mm (2.6 meV) to 45 nm (12.8 meV) were obtained by varying the cavity factor (Q).<>     

Autonomously Self‐Reporting Hard Coatings: Tracking the Temporal Oxidation Behavior of TiN by In Situ Sheet Resistance Measurements

Monitoring the structural health and integrity of coated components is of vital importance to increase their lifetime and the overall sustainability of the targeted applications. Here, the temporal oxidation behavior of TiN thin films is tracked using in situ sheet resistance measurements. Based on correlative film morphology, structure, and local composition data, it is evident that observed resistance changes are caused by oxidation of TiN. Thickness measurements of the remaining TiN under the oxide layer are in very good agreement with thicknesses deduced from in situ sheet resistance measurements. Hence, the in situ measured sheet resistance is an autonomous self‐reporting property useful for tracking the temporal oxidation behavior of TiN coatings.     

Determination ofN-nitrosodiethanolamine in cosmetics and in alkanolamines: results of collaborative studies

Summary Results of collaborative studies on methods for determination ofN-Nitrosodiethanolamine (NDELA), in cosmetics and in alkanolamines are reported. Participants from eleven laboratories in each study examined two freshly prepared model cosmetics, one emulsion and one shower gel and also one sample of triethanolamine. Samples were analyzed unspiked and after fortification with 50 g/kg NDELA. Distribution of unspiked and spiked samples and amounts of NDELA added were not known to the participants. In spiked samples overall mean values (±standard deviation) found for NDELA were 50 ± 9 gg/kg for the emulsion, 53 ± 8 gg/kg for the shower gel and 47 ± 10 g/kg for triethanolamine. With few exceptions, NDELA was not found in unspiked samples at concentrations exceeding the determination limit (10 gg/kg).

---

Ergebnisse von Ringversuchen zur Bestimmung vonN-Nitrosodiethanolamin in Cosmetica und in Alkanolaminen

Zusammenfassung Ergebnisse von Ringversuchen zur Bestimmung vonN-Nitrosodiethanolamin (NDELA) in kosmetischen Mitteln and in Alkanolaminen werden beschrieben. Teilnehmer aus jeweils elf Laboratorien analysierten zwei kosmetische Mittel, die für diese Studie frisch hergestellt wurden, eine Emulsion und ein Duschbad Bowie eine Probe Triethanolamin. Die Proben wurden undotiert Bowie nach Zusatz von jeweils 50 g/kg NDELA untersucht, wobei die Verteilung und Höhe der Dotierung den Teilnehmern nicht bekannt wares. Die Gesamtmittelwerte betrugen für die dotierte Emulsion 50 g/kg NDELA±9 g/kg SD (Standardabweichung), für das dotierte Duschbad 53 g/kg NDELA±8 g/kg SD and fur das dotierte Triethanolamin 47 g/kg NDELA ± 10 g/kg SD. Mit wenigen Ausnahmen wurden in den undotierten Proben keine NDELA-Gehalte gefunden, die die Bestimmungsgrenze von 10 g/kg überschritten.

     

Temperature-dependent characteristics and single-mode performanceof AlGaInP-based 670-690-nm vertical-cavity surface-emitting lasers

We report on temperature dependent characteristics and single mode performance of one-wave cavity, planar implanted, AlGaInP-based vertical-cavity surface emitting lasers. By optimizing the overlap between the gain peak and the cavity mode of the structure, we demonstrate record device performance, including 8.2 mW maximum output power and 11% power conversion efficiency for multimode operation and 1.9 mW and 9.6% power conversion efficiency for single mode operation at 687 nm. Improved performance at elevated temperatures is also achieved, with 1.5 mW output power demonstrated at 50°C from a 15-μm-diameter device     

Semi‐Markovian modelling and performance analysis of variable rate traffic in ATM networks

Semi‐Markovian processes (SMP) serve as a versatile means to model various traffic types generated by sources or superposed from links in ATM networks. An efficient discrete time analysis method is proposed for SMP/G/1 queueing systems to evaluate ATM switches with non‐renewal input. Some basic results are derived for the autocorrelation function of semi‐Markovian processes and for the effect of state space reduction on autocorrelation, which show how to represent correlated traffic with given characteristic by an adequate SMP model of limited size. This revised version was published online in June 2006 with corrections to the Cover Date.