Photo‐crosslinking of poly[ethene‐stat‐(methacrylic acid)] functionalised with maleimide side groups

BACKGROUND: Photo‐crosslinkable polymers are well known and commercially applied as photoresists. But so far they have not been applied as membrane materials for separation processes. They would offer certain advantages in membrane fabrication over conventional crosslinked polymer materials. Therefore, in this work, a poly[ethene‐stat‐(methacrylic acid)] (PEMAA) which is a potential membrane polymer for different separation problems was functionalised with photo‐crosslinkable maleimide side groups. RESULTS: It has been shown that PEMAA can be used as basic polymer material and a conversion with 3‐hydroxypropylmaleimide is possible in order to obtain a photo‐crosslinkable polymer. Investigation of the crosslinking mechanism was performed using stationary infrared and UV‐visible spectroscopy as well as nanosecond transient spectroscopy absorption measurements of a rotating film. Intense transient absorption of the maleimide‐esterified PEMAA occurs at 250 nm in the film pointing to maleimide anion formation and crosslinking via an ionic dimerisation mechanism. CONCLUSION: It is found that crosslinking reactions can be observed spectroscopically in situ using a maleimide‐functionalised PEMAA. Furthermore, experiments can be performed in the liquid phase (polymer in solution) as well as in the solid phase (polymer film) using a rotating polymer film sample. Maleimide anion formation and crosslinking via an ionic dimerisation mechanism can be investigated by variation of the polymer structure as well as the structure of the maleimide side groups. Copyright © 2009 Society of Chemical Industry     

Die Verteilung von Zink zwischen Ferrit und Austenit und die Thermodynamik des Zweistoffsystems Eisen—Zink

Verfahren zur Herstellung sehr reiner Eisen-Zink-Legierungen. Ermittlung der Sättigungsgehalte an Zink im Ferrit und Austenit mit Hilfe der Mikrosonde. Berechnungen zur Beschreibung der thermodynamischen Eigenschaften des zinklegierten paramagnetischen Ferrits und des zinklegierten Austenits unter Zuhilfenahme von thermodynamischen Werten aus dem Schrifttum. Berechnung des Gleichgewichts Austenit/Ferrit, Festlegung der γ-Schleife des Zustandsschaubildes und Vergleich mit den ermittelten Werten. Berechnung der Löslichkeit der Γ-Phase im α-Eisen mit Hilfe der bereits bekannten Thermodynamik der α-Phase. Berechnung einer metastabilen Mischungslücke und deren Spinodale im Ferrit.     

Verification of cardiac tissue electrophysiology simulators using an N-version benchmark

Ongoing developments in cardiac modelling have resulted, in particular, in the development of advanced and increasingly complex computational frameworks for simulating cardiac tissue electrophysiology. The goal of these simulations is often to represent the detailed physiology and pathologies of the heart using codes that exploit the computational potential of high-performance computing architectures. These developments have rapidly progressed the simulation capacity of cardiac virtual physiological human style models; however, they have also made it increasingly challenging to verify that a given code provides a faithful representation of the purported governing equations and corresponding solution techniques. This study provides the first cardiac tissue electrophysiology simulation benchmark to allow these codes to be verified. The benchmark was successfully evaluated on 11 simulation platforms to generate a consensus gold-standard converged solution. The benchmark definition in combination with the gold-standard solution can now be used to verify new simulation codes and numerical methods in the future.     

Kinetic and dynamic Delaunay tetrahedralizations in three dimensions

We describe algorithms to implement fully dynamic and kinetic three-dimensional unconstrained Delaunay triangulations, where the time evolution of the triangulation is not only governed by moving vertices but also by a changing number of vertices. We use three-dimensional simplex flip algorithms, a stochastic visibility walk algorithm for point location and in addition, we propose a new simple method of deleting vertices from an existing three-dimensional Delaunay triangulation while maintaining the Delaunay property. As an example, we analyse the performance in various cases of practical relevance. The dual Dirichlet tessellation can be used to solve differential equations on an irregular grid, to define partitions in cell tissue simulations, for collision detection etc.     

KHATT: An open Arabic offline handwritten text database

A comprehensive Arabic handwritten text database is an essential resource for Arabic handwritten text recognition research. This is especially true due to the lack of such database for Arabic handwritten text. In this paper, we report our comprehensive Arabic offline Handwritten Text database (KHATT) consisting of 1000 handwritten forms written by 1000 distinct writers from different countries. The forms were scanned at 200, 300, and 600 dpi resolutions. The database contains 2000 randomly selected paragraphs from 46 sources, 2000 minimal text paragraph covering all the shapes of Arabic characters, and optionally written paragraphs on open subjects. The 2000 random text paragraphs consist of 9327 lines. The database forms were randomly divided into 70%, 15%, and 15% sets for training, testing, and verification, respectively. This enables researchers to use the database and compare their results. A formal verification procedure is implemented to align the handwritten text with its ground truth at the form, paragraph and line levels. The verified ground truth database contains meta-data describing the written text at the page, paragraph, and line levels in text and XML formats. Tools to extract paragraphs from pages and segment paragraphs into lines are developed. In addition we are presenting our experimental results on the database using two classifiers, viz. Hidden Markov Models (HMM) and our novel syntactic classifier.     

Thermophysical Properties of a Chromium–Nickel–Molybdenum Steel in the Solid and Liquid Phases

Numerical simulation of vacuum arc re-melting, pressurized or protective electro-slag re-melting, and ingot casting have become quite important in the metal industry. However, a major drawback of these simulation techniques is the lack of accurate thermophysical properties for temperatures above 1,500 K. Heat capacity, heat of fusion, density, and thermal conductivity are important input parameters for the heat transfer equation. Since, direct measurements of thermal conductivity of alloys in the liquid state are almost impossible, its estimation from electrical conductivity using the Wiedemann–Franz law is very useful. The afore-mentioned thermophysical properties of several steels are investigated within the context of an ongoing project. Here, we present a full set of thermophysical data for the chromium–nickel–molybdenum steel meeting the standard DIN 1.4435 (X2CrNiMo18-14-3); these values will be used by our partner to simulate various re-melting and solidification processes. Wire-shaped samples of the steel are resistively volume-heated, as part of a fast capacitor discharge circuit. Time-resolved measurements with sub-μs resolution of current through the specimen are performed with a Pearson probe. The voltage drop across the specimen is measured with knife-edge contacts and ohmic voltage dividers, the temperature of the sample with a pyrometer, and the volumetric expansion of the wire with a fast acting CCD camera. These measurements enable the heat of fusion, the heat capacity, and the electrical resistivity to be determined as a function of temperature in the solid and liquid phases. The thermal conductivity and thermal diffusivity are estimated via the Wiedemann–Franz law.     

Markov models for offline handwriting recognition: a survey

Since their first inception more than half a century ago, automatic reading systems have evolved substantially, thereby showing impressive performance on machine-printed text. The recognition of handwriting can, however, still be considered an open research problem due to its substantial variation in appearance. With the introduction of Markovian models to the field, a promising modeling and recognition paradigm was established for automatic offline handwriting recognition. However, so far, no standard procedures for building Markov-model-based recognizers could be established though trends toward unified approaches can be identified. It is therefore the goal of this survey to provide a comprehensive overview of the application of Markov models in the research field of offline handwriting recognition, covering both the widely used hidden Markov models and the less complex Markov-chain or n-gram models. First, we will introduce the typical architecture of a Markov-model-based offline handwriting recognition system and make the reader familiar with the essential theoretical concepts behind Markovian models. Then, we will give a thorough review of the solutions proposed in the literature for the open problems how to apply Markov-model-based approaches to automatic offline handwriting recognition.     

The Human Host Defense Ribonucleases 1, 3 and 7 Are Elevated in Patients with Sepsis after Major Surgery—A Pilot Study

Sepsis is the most common cause of death in intensive care units and associated with widespread activation of host innate immunity responses. Ribonucleases (RNases) are important components of the innate immune system, however the role of RNases in sepsis has not been investigated. We evaluated serum levels of RNase 1, 3 and 7 in 20 surgical sepsis patients (Sepsis), nine surgical patients (Surgery) and 10 healthy controls (Healthy). RNase 1 and 3 were elevated in Sepsis compared to Surgery (2.2- and 3.1-fold, respectively; both p < 0.0001) or compared to Healthy (3.0- and 15.5-fold, respectively; both p < 0.0001). RNase 1 showed a high predictive value for the development of more than two organ failures (AUC 0.82, p = 0.01). Patients with renal dysfunction revealed higher RNase 1 levels than without renal dysfunction (p = 0.03). RNase 1 and 3 were higher in respiratory failure than without respiratory failure (p < 0.0001 and p = 0.02, respectively). RNase 7 was not detected in Healthy patients and only in two patients of Surgery, however RNase 7 was detected in 10 of 20 Sepsis patients. RNase 7 was higher in renal or metabolic failure than without failure (p = 0.04 and p = 0.02, respectively). In conclusion, RNase 1, 3 and 7 are secreted into serum under conditions with tissue injury, such as major surgery or sepsis. Thus, RNases might serve as laboratory parameters to diagnose and monitor organ failure in sepsis.     

Blast furnace slags as functional fillers on rheological,thermal, and mechanical behavior of thermoplastics

Blast furnace slags (BFS) is a secondary byproduct of iron industry, which has a combination of acidic and basic oxides and show a complex, multiphase structure. If appropriately tailored, BFS could be an effective functional filler, improving the property profile of thermoplastics such as polypropylene (PP) and polystyrene (PS). As a raw material, the proposed filler may introduce both economic and ecological advantages, as it is considered an inexpensive secondary product rather than a natural resource. The current study aims at investigating the effect of incorporating BFS as a micro‐sized filler on the rheological, thermal, and mechanical behavior of PP and PS. BFS types in this study are air‐cooled, crystalline, and amorphous, grounded types. Both types are ground into 71, 40, and 20 μm batches and introduced in 10, 20, and 30 weight fractions via melt kneading. Mixtures are then formed into 4‐mm and 2‐mm thick plates via compression molding. Slight increase in rheological factors is observed with increasing filler loading. BFS hinders the crystallization of PP, resulting in slight increase of crystallization temperatures (T_c) and lowering of crystallization enthalpy (ΔH_c). No significant effect of filler on transition temperatures (T_g) is reported. Mechanically, BFS increases the tensile modulus of PP, but decreases its strength. For PS formulations, a modest toughening effect is observed by slag filler. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43021.