Expedient Immobilization of TEMPO by Copper‐Catalyzed Azide‐Alkyne [3+2]‐Cycloaddition onto Polystyrene Resin

TEMPO was readily grafted by copper(I)‐catalyzed azide‐alkyne cycloaddition onto polystyrene. Starting with commercially available Merrifield resin (4.3 mmol/ g) almost quantitative loading of TEMPO onto the polymer was achieved (≥ 4 mmol/ g). The so obtained PS‐CLICK‐TEMPO allowed the oxidation of alcohols to aldehydes with bleach or molecular oxygen as the terminal oxidant with high yields and selectivity in multiple cycles without loss of activity.     

Gold-silver alloy nanoshells: a new candidate for nanotherapeutics and diagnostics

We have developed novel gold-silver alloy nanoshells as magnetic resonance imaging (MRI) dual T₁ (positive) and T₂ (negative) contrast agents as an alternative to typical gadolinium (Gd)-based contrast agents. Specifically, we have doped iron oxide nanoparticles with Gd ions and sequestered the ions within the core by coating the nanoparticles with an alloy of gold and silver. Thus, these nanoparticles are very innovative and have the potential to overcome toxicities related to renal clearance of contrast agents such as nephrogenic systemic fibrosis. The morphology of the attained nanoparticles was characterized by XRD which demonstrated the successful incorporation of Gd(III) ions into the structure of the magnetite, with no major alterations of the spinel structure, as well as the growth of the gold-silver alloy shells. This was supported by TEM, ICP-AES, and SEM/EDS data. The nanoshells showed a saturation magnetization of 38 emu/g because of the presence of Gd ions within the crystalline structure with r₁ and r₂ values of 0.0119 and 0.9229 mL mg^-1 s^-1, respectively (Au:Ag alloy = 1:1). T₁- and T₂-weighted images of the nanoshells showed that these agents can both increase the surrounding water proton signals in the T₁-weighted image and reduce the signal in T₂-weighted images. The as-synthesized nanoparticles exhibited strong absorption in the range of 600-800 nm, their optical properties being strongly dependent upon the thickness of the gold-silver alloy shell. Thus, these nanoshells have the potential to be utilized for tumor cell ablation because of their absorption as well as an imaging agent.     

Phase Transfer Catalysis in Phosphorus Chemistry

Phase-transfer catalysis (PTC) has been widely used for the synthesis of organic compounds for more than three decades. The scope and mechanistic features of PTC have been the aim of numerous studies. This review focuses on the application of phase transfer catalysis in synthesis of phosphorus compounds.     

Unsteady heat transfer from an elliptic cylinder

Numerical methods are used to investigate the transient heat transfer from an elliptic cylinder to a steady stream of viscous, incompressible fluid. The temperature of the cylinder is considered spatially uniform but not constant in time. The momentum and heat balance equations were solved numerically in elliptic coordinate system. The solutions span the parameter ranges 5 ? Re ? 40, 1 ? Pr ? 100 and axis ratio ε, 0.1 ? ε ? 0.75. The computations were focused on the influence of the axis ratio and volume heat capacity ratio on the heat transfer rate.     

Acoustic resonant response of smooth or rough 3D small objects

This paper presents a new method in order to appreciate the roughness of elliptical or spherical small bodies by using ultrasound. This thing is possible by knowing about 2-4 acoustic resonance frequencies. The maximum diameter and medium roughness of the bodies are evaluated. Small bodies such as tumors can be detected, when other medical devices like ultrasound or tomography computerized cannot evaluate the surface shape because of limited spatial resolution. The method is intended to be used in oncological medicine for early non-invasive diagnostic for cancer, because tumor tissue has outer surface more or less rough, depending on whether or not it is malignant.     

SEM‐EDX and microftir studies on evaluation of protection capacity of some thin phosphate layers

This article presents the SEM‐EDX and microFTIR study and the corrosion behavior of new five types of phosphated coatings obtained by coprecipitation in acid aqueous medium of some metal cations, pursuing the influence of the addition of other cations and a moderator of precipitation, on the uniformity and compactness of the layers and on the morphology of dendritic structure of Zn(II) and Fe(II) phosphates. Microsc. Res. Tech. 2012. © 2012 Wiley Periodicals, Inc.     

Dielectric Ba(Ti1?xSnx)O3 (x?=?0.13) ceramics, sintered by spark plasma and conventional methods

A two-step sintering approach composed of spark-plasma-sintering (SPS) technique at 1000 °C for 1 min and under a uniaxial pressure of 63 MPa followed by conventional sintering at 1400 °C for 3 h is proposed for synthesis of dense Ba(Ti_0.87Sn_0.13)O₃ ceramics. Starting powders had grain size of about 90 nm and were obtained by co-precipitation. The SPS pellets consist of submicron (300–500 nm) grains. X-ray diffraction analysis of as-prepared Ba(Ti_0.87Sn_0.13)O₃ ceramic shows the occurrence of cubic and tetragonal phase coexistence for the pellets obtained after SPS processing and the presence of only tetragonal phase in the samples after the second (conventional) sintering. Grain uniformity in the final product is high, with average size of ~2 μm. The apparent densities of the sintered pellets at temperature of 1400 °C were ~92% of the theoretical value of Ba(Ti_0.87Sn_0.13)O₃. The ceramics exhibit a high relative dielectric constant of 6,550 and a dielectric loss (tan δ) = 0.078 at Curie temperature of 63 °C and 10 Hz.     

Acetylcholinesterase voltammetric biosensors based on carbon nanostructure-chitosan composite material for organophosphate pesticides

A sensitive biosensor for chloropyrifos (CPF), an organophosphorus pesticide, was developed by immobilizing acetylcholinesterase (AChE) through covalent bonding to an oxidized exfoliated graphite nanoplatelet (xGnPs)–chitosan cross-linked composite. Because of the increased surface area and the conductive properties of the nanomaterial, AChE developed a high affinity for acetylthiocholine (ATCI) and formed thiocholine with a fast response. The response of the sensor was a linear function of ATCI concentration in two segments, one from 0.005 to 0.039 mM and the second from 0.064 mM to 0.258 mM. The corresponding equation for the first range was i_p(A) = 2.26 × 10^? 5c + 4.39 × 10^? 7 (R² = 0.992) and the equation for the second was i_p(A) = 6.80 × 10^? 6c + 1.30 × 10^? 6 (R² = 1.000), with a detection limit of 1.58 × 10^? 10 M. The fabrication of the sensor was simple, the response was fast and the stability acceptable. This sensor has many potential applications, the foremost being in organophosphorus pesticides.     

Effect of short carbon fibers and MWCNTs on microwave absorbing properties of polyester composites containing nickel-coated carbon fibers

Multiphase composite materials filled with multiwall carbon nanotubes (MWCNTs), short nickel-coated carbon fibers and millimeter-long carbon fibers with various weight fractions and compositions are developed and used for the design of wide-band thin radar-absorbing screens. The effective complex permittivity of several composite samples is measured in the frequency range from 8 GHz to 18 GHz. The obtained results show that the addition of the MWCNTs into the mixture allows tuning the EM properties of the composite filled with the short nickel-coated fibers. Numerical simulations are also performed in order to design new radar-absorbing shields. Single-layer and bi-layer thin dielectric Salisbury screens are designed to exhibit minimum reflection coefficient at 10 GHz and at 15 GHz, and maximum bandwidth at −10 dB. It results that the total thickness of the screen can be reduced below 2 mm by using a lossy sheet made with the composite filled with MWCNTs and nickel-coated carbon fibers, whereas the bandwidth at −10 dB can exceed 6 GHz in a bi-layer structure.     

Poly(l-lactic acid)/alkali lignin composites: properties,biocompatibility, cytotoxicity and antimicrobial behavior

In this study, poly(L-lactic acid) (PLA)/low molar mass alkali lignin (aL) (1%, 5% and 10% w/w) composites were prepared primarily for a comprehensive understanding of the effect of aL on their antimicrobial properties, biocompatibility and cytotoxic behavior. The properties were evaluated by Fourier transform infrared spectroscopy, scanning electron microscopy, differential scanning calorimetry, thermogravimetry and X-ray diffraction. The mechanical, water vapor barrier properties and photodegradability were analyzed as well. The results showed a significant inhibiting effect of aL on the crystallization behavior of PLA, increased water barrier properties (up to 73%) and photodegradability. PLA/aL composites showed a tenfold reduction in Gram-positive bacteria viability, very good cellular response and very low cytotoxicity levels, thus validating these materials as non-cytotoxic and with high potential to be used as food packaging.

Graphical abstract