Fuzzy Multicriteria Decision Aid Method for Conceptual Design

A general fuzzy multicriteria decision aid method for conceptual design is proposed. It is used for selecting the best compromise alternative, among a finite set of design concepts, considering environmental and economic performance. At the conceptual design phase most of the environmental impact is committed, whereas at that stage the design concepts are imprecisely defined and should be selected based on multiple, often conflicting criteria. Three vacuum cleaners, using different design principles for the dust storage, are analyzed. The best compromise design alternative is selected, considering trade offs between end-of-life profit and environmental criteria.     

Atmospheric Pressure Plasma Activation of Hydroxyapatite to Improve Fluoride Incorporation and Modulate Bacterial Biofilm

Despite the technological progress of the last decade, dental caries is still the most frequent oral health threat in children and adults alike. Such a condition has multiple triggers and is caused mainly by enamel degradation under the acidic attack of microbial cells, which compose the biofilm of the dental plaque. The biofilm of the dental plaque is a multispecific microbial consortium that periodically develops on mammalian teeth. It can be partially removed through mechanical forces by individual brushing or in specialized oral care facilities. Inhibition of microbial attachment and biofilm formation, as well as methods to strengthen dental enamel to microbial attack, represent the key factors in caries prevention. The purpose of this study was to elaborate a cold plasma-based method in order to modulate microbial attachment and biofilm formation and to improve the retention of fluoride (F⁻) in an enamel-like hydroxyapatite (HAP) model sample. Our results showed improved F retention in the HAP model, which correlated with an increased antimicrobial and antibiofilm effect. The obtained cold plasma with a dual effect exhibited through biofilm modulation and enamel strengthening through fluoridation is intended for dental application, such as preventing and treating dental caries and enamel deterioration.     

Microfluidic devices modulate tumor cell line susceptibility to NK cell recognition

This study aims to adoptively reduce the major histocompatibility complex class I (MHC-I) molecule surface expression of cancer cells by exposure to microfluid shear stress and a monoclonal antibody. A microfluidic system is developed and tumor cells are injected at different flow rates. The bottom surface of the microfluidic system is biofunctionalized with antibodies (W6/32) specific for the MHC-I molecules with a simple method based on microfluidic protocols. The antibodies promote binding between the bottom surface and the MHC-I molecules on the tumor cell membrane. The cells are injected at an optimized flow rate, then roll on the bottom surface and are subjected to shear stress. The stress is localized and enhanced on the part of the membrane where MHC-I proteins are expressed, since they stick to the antibodies of the system. The localized stress allows a stripping effect and consequent reduction of the MHC-I expression. It is shown that it is possible to specifically treat and recover eukaryotic cells without damaging the biological samples. MHC-I molecule expression on treated and control cell surfaces is measured on tumor and healthy cells. After the cell rolling treatment a clear reduction of MHC-I levels on the tumor cell membrane is observed, whereas no changes are observed on healthy cells (monocytes). The MHC-I reduction is investigated and the possibility that the developed system could induce a loss of these molecules from the tumor cell surface is addressed. The percentage of living tumor cells (viability) that remain after the treatment is measured. The changes induced by the microfluidic system are analyzed by fluorescence-activated cell sorting and confocal microscopy. Cytotoxicity tests show a relevant increased susceptibility of natural killer (NK) cells on microchip-treated tumor cells.     

UV‐curable nanocomposites containing zirconium vinylphosphonate or zirconia

UV‐cured nanocomposite films were prepared from acrylic monomer and two types of nanomaterial: zirconium vinylphosphonate and zirconia, in the presence of a photoinitiator. The films were characterized by FTIR, SEM, and AFM. FTIR spectra showed the disappearance of band assigned to the CC group both of monomer and zirconium vinylphosphonate by polymerization and the presence of the phosphonate group in polymer. The influence of zirconium vinylphosphonate and zirconia content on thermooxidative degradation of polymeric films was studied by thermogravimetry. SEM and AFM images showed that nanomaterials are dispersed in polymer matrix with no macroscopic phase separation. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

UV light copolymerization of dimethyl vinylphosphonate with bisphenol A ethoxylate dimethacrylate

Dimethyl vinylphosphonate (DMVP), a very promising monomer, was copolymerized with acrylic monomer bisphenol A ethoxylate dimethacrylate (BEMA), in different molar ratios, by radical photoinitiated polymerization in the presence of photoinitiator Darocur 4265 (3 wt%) and in the absence of solvent. The UV light polymerization was an efficient method to obtain polymers in a green procedure. The molar ratio between DMVP and acrylic monomer BEMA varied between 1:1 and 5:1. The copolymers were characterized by FTIR, thermal analysis, water uptake and conductivity. From the ATR-FTIR spectra of DMVP-BEMA copolymers at the molar ratios of 1:1–5:1, it was observed that the intensity of P-O-C aliphatic band increased with increases in DMVP content. The synthesized copolymers showed good thermal stability in the range of 335–390 °C. DMVP:BEMA copolymer at 1:1 molar ratio displayed the highest stability, with decomposition temperature above 390 °C, the highest temperature in the series. The water uptake decreased with increases in DMVP content and this behavior was correlated with the ionic conductivity. Based on the Bode diagrams, the ionic conductivity of DMVP:BEMA of 1:1 molar ratio was 6.15 × 10^?8 S cm^?1 and that of DMVP:BEMA of 2:1 molar ratio was 3.69 × 10^?8 S cm^?1 which were considered promising as valuable conducting materials.     

Preparation and in vitro,bulk, and surface investigation of chitosan/graphene oxide composite films

Chitosan/graphene oxide (GO) composite films were prepared by solution blending method. Intensive characterization of films, surface, and bulk, was performed by Fourier transmission infrared spectrometry, X‐ray diffraction, scanning and transmission electron microscopy, thermal gravimetric analysis, and mechanical test. The biocompatibility of chitosan/GO films was tested in vitro on the murine osteoblastic cell line MC3T3‐E1. By incorporating 6 wt% GO into chitosan, Young's modulus and tensile strength values exceed those of nacre by about 60 and 20%, respectively. Biocompatibility assays indicated a high cell proliferation rate for the composite films with high GO content. POLYM. COMPOS., 34:2116–2124, 2013. © 2013 Society of Plastics Engineers     

Evaluation of a functionalized copolymer as adsorbent on direct dyes removal process: Kinetics and equilibrium studies

Functionalized polymeric microbeads were investigated as adsorbent for the removal of three direct dyes from aqueous solutions. The effects of different experimental parameters, such as initial dye concentration, temperature, and solution pH on the adsorption process were investigated. The adsorption process can be conducted with very good result at normal working conditions: neutral pH and normal temperature. The maximum percentage removal obtained was 99.11% for the symmetrical disazo dye, 90.14% for asymmetrical disazo dye, and 98.53% for trisazo dye. The adsorption kinetics followed the pseudo‐second‐order equation for all three investigated dyes in all working conditions. The experimental data were fitted to Langmuir, Freundlich, Sips, and Redlich–Peterson isotherm models, and the best fit was obtained with Sips model. Thermodynamic parameters (ΔH°, ΔS°, and ΔG°) revealed that dye adsorption is an endothermic and spontaneous process. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Heme Oxygenase Inhibition by 1‐Aryl‐2‐(1H‐imidazol‐1‐yl/1H‐1,2,4‐triazol‐1‐yl)ethanones and Their Derivatives

Previous studies by our research group have been concerned with the design of selective inhibitors of heme oxygenases (HO‐1 and HO‐2). The majority of these were based on a four‐carbon linkage of an azole, usually an imidazole, and an aromatic moiety. In the present study, we designed and synthesized a series of inhibition candidates containing a shorter linkage between these groups, specifically, a series of 1‐aryl‐2‐(1H‐imidazol‐1‐yl/1H‐1,2,4‐triazol‐1‐yl)ethanones and their derivatives. As regards HO‐1 inhibition, the aromatic moieties yielding best results were found to be halogen‐substituted residues such as 3‐bromophenyl, 4‐bromophenyl, and 3,4‐dichlorophenyl, or hydrocarbon residues such as 2‐naphthyl, 4‐biphenyl, 4‐benzylphenyl, and 4‐(2‐phenethyl)phenyl. Among the imidazole‐ketones, five ( 36 – 39 , and 44 ) were found to be very potent (IC₅₀<5 μM ) toward both isozymes. Relative to the imidazole‐ketones, the series of corresponding triazole‐ketones showed four compounds ( 54 , 55 , 61 , and 62 ) having a selectivity index >50 in favor of HO‐1. In the case of the azole‐dioxolanes, two of them ( 80 and 85 ), each possessing a 2‐naphthyl moiety, were found to be particularly potent and selective HO‐1 inhibitors. Three non‐carbonyl analogues ( 87 , 89 , and 91 ) of 1‐(4‐chlorophenyl)‐2‐(1H‐imidazol‐1‐yl)ethanone were found to be good inhibitors of HO‐1. For the first time in our studies, two azole‐based inhibitors ( 37 and 39 ) were found to exhibit a modest selectivity index in favor of HO‐2. The present study has revealed additional candidates based on inhibition of heme oxygenases for potentially useful pharmacological and therapeutic applications.     

Optimization of synthesis parameters in interfacial polycondensation using design of experiments

The reaction of phenylphosphonic dichloride with 4,4′-cyclohexylidenebisphenol by a gas–liquid interfacial polycondensation was investigated. The design of experiments (DoE) method is used for determination of the best reaction conditions. The correlation of simultaneous influence of the parameters (reaction time, reaction temperature, alkaline medium, reagents molar ratio) on yield and inherent viscosity was studied.     

Comparative analysis of the processes of collagen concentration by ultrafiltration using different types of membranes

Tangential flow filtration of the collagen protein solutions with a molecular weight 12, 14, and 24 kDa is investigated using flat sheet membranes. The effects of tangential ultrafiltration (UF) on the permeate properties using two regenerated celluloses (RCs) and two polyethersulfone (PES) membranes with molecular weight cut-off (MWCO) of 5 and 10 kDa are reported. The permeate and concentrate obtained in the UF experiments are characterized from a physical–chemical point of view by determining the temperature, pH, electrical conductivity, nitrogen content, and protein concentration. In addition, the experimental data are modeled using Hermia's model. The UF experiments demonstrated that permeate flux declined with increasing molecular weight of collagen at constant concentration (1%). Regardless of the molecular weight of collagen, the rejections decrease in the following order: PES 5 kDa > RC5kDa > RC10kDa > PES10kDa. In case of membrane with higher MWCO, the clogging phenomenon is mainly due to the blockage of the internal pores of the membrane than the formation of a polarization layer. Morphologies and characteristics of the membranes are characterized using scanning electron microscopy.