UV light copolymerization of dimethyl vinylphosphonate with bisphenol A ethoxylate dimethacrylate

Dimethyl vinylphosphonate (DMVP), a very promising monomer, was copolymerized with acrylic monomer bisphenol A ethoxylate dimethacrylate (BEMA), in different molar ratios, by radical photoinitiated polymerization in the presence of photoinitiator Darocur 4265 (3 wt%) and in the absence of solvent. The UV light polymerization was an efficient method to obtain polymers in a green procedure. The molar ratio between DMVP and acrylic monomer BEMA varied between 1:1 and 5:1. The copolymers were characterized by FTIR, thermal analysis, water uptake and conductivity. From the ATR-FTIR spectra of DMVP-BEMA copolymers at the molar ratios of 1:1–5:1, it was observed that the intensity of P-O-C aliphatic band increased with increases in DMVP content. The synthesized copolymers showed good thermal stability in the range of 335–390 °C. DMVP:BEMA copolymer at 1:1 molar ratio displayed the highest stability, with decomposition temperature above 390 °C, the highest temperature in the series. The water uptake decreased with increases in DMVP content and this behavior was correlated with the ionic conductivity. Based on the Bode diagrams, the ionic conductivity of DMVP:BEMA of 1:1 molar ratio was 6.15 × 10^?8 S cm^?1 and that of DMVP:BEMA of 2:1 molar ratio was 3.69 × 10^?8 S cm^?1 which were considered promising as valuable conducting materials.     

Heme oxygenase inhibition by α-(1H-imidazol-1-yl)-ω-phenylalkanes: effect of introduction of heteroatoms in the alkyl linker

Several α-(1H-imidazol-1-yl)-ω-phenylalkanes were synthesized and evaluated as novel inhibitors of heme oxygenase (HO). These compounds were found to be potent and selective for the stress-induced isozyme HO-1, showing mostly weak activity toward the constitutive isozyme HO-2. The introduction of an oxygen atom in the alkyl linker produced analogues with decreased potency toward HO-1, whereas the presence of a sulfur atom in the linker gave rise to analogues with greater potency toward HO-1 than the carbon-containing analogues. The most potent compounds studied contained a five-atom linker between the imidazolyl and phenyl moieties, whereas the most HO-1-selective compounds contained a four-atom linker between these groups. The compounds with a five-atom linker containing a heteroatom (O or S) were found to be the most potent inhibitors of HO-2; 1-(N-benzylamino)-3-(1H-imidazol-1-yl)propane dihydrochloride, with a nitrogen atom in the linker, was found to be inactive.     

Corrosion of Mild Steel by Urban River Water

The corrosion processes of mild steel immersed in river water were investigated. The reaction of the Bahlui River on common steel used in domestic and industrial installations was studied. The corrosion of mild steel is an extensive topic approached in different media, yet little information about river water as a corrosive has been reported. The experimental determinations were performed for short term immersion of four alloys in the laboratory. By using Tafel extrapolation and electrochemical impedance spectroscopy, the corrosion of the alloys was investigated. Scanning electron microscopy coupled with energy dispersive X-ray analysis and Fourier-transform infrared spectroscopy were employed to characterize the morphology of corrosion products and identify their phases. The corrosive activity of river water leads to the formation of inner compact and outer porous layers. The differences between corrosion products formed in the presence of underground and surface waters are described.     

Evaluation of a functionalized copolymer as adsorbent on direct dyes removal process: Kinetics and equilibrium studies

Functionalized polymeric microbeads were investigated as adsorbent for the removal of three direct dyes from aqueous solutions. The effects of different experimental parameters, such as initial dye concentration, temperature, and solution pH on the adsorption process were investigated. The adsorption process can be conducted with very good result at normal working conditions: neutral pH and normal temperature. The maximum percentage removal obtained was 99.11% for the symmetrical disazo dye, 90.14% for asymmetrical disazo dye, and 98.53% for trisazo dye. The adsorption kinetics followed the pseudo‐second‐order equation for all three investigated dyes in all working conditions. The experimental data were fitted to Langmuir, Freundlich, Sips, and Redlich–Peterson isotherm models, and the best fit was obtained with Sips model. Thermodynamic parameters (ΔH°, ΔS°, and ΔG°) revealed that dye adsorption is an endothermic and spontaneous process. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Heme Oxygenase Inhibition by 1‐Aryl‐2‐(1H‐imidazol‐1‐yl/1H‐1,2,4‐triazol‐1‐yl)ethanones and Their Derivatives

Previous studies by our research group have been concerned with the design of selective inhibitors of heme oxygenases (HO‐1 and HO‐2). The majority of these were based on a four‐carbon linkage of an azole, usually an imidazole, and an aromatic moiety. In the present study, we designed and synthesized a series of inhibition candidates containing a shorter linkage between these groups, specifically, a series of 1‐aryl‐2‐(1H‐imidazol‐1‐yl/1H‐1,2,4‐triazol‐1‐yl)ethanones and their derivatives. As regards HO‐1 inhibition, the aromatic moieties yielding best results were found to be halogen‐substituted residues such as 3‐bromophenyl, 4‐bromophenyl, and 3,4‐dichlorophenyl, or hydrocarbon residues such as 2‐naphthyl, 4‐biphenyl, 4‐benzylphenyl, and 4‐(2‐phenethyl)phenyl. Among the imidazole‐ketones, five ( 36 – 39 , and 44 ) were found to be very potent (IC₅₀<5 μM ) toward both isozymes. Relative to the imidazole‐ketones, the series of corresponding triazole‐ketones showed four compounds ( 54 , 55 , 61 , and 62 ) having a selectivity index >50 in favor of HO‐1. In the case of the azole‐dioxolanes, two of them ( 80 and 85 ), each possessing a 2‐naphthyl moiety, were found to be particularly potent and selective HO‐1 inhibitors. Three non‐carbonyl analogues ( 87 , 89 , and 91 ) of 1‐(4‐chlorophenyl)‐2‐(1H‐imidazol‐1‐yl)ethanone were found to be good inhibitors of HO‐1. For the first time in our studies, two azole‐based inhibitors ( 37 and 39 ) were found to exhibit a modest selectivity index in favor of HO‐2. The present study has revealed additional candidates based on inhibition of heme oxygenases for potentially useful pharmacological and therapeutic applications.     

A numerical study of the unsteady heat/mass transfer inside a circulating sphere

Numerical methods are used to investigate the transient, forced convection heat/mass transfer inside circulating spheres at low to moderate Reynolds numbers. The heat/mass balance equations were solved numerically in spherical coordinates system by a finite difference method. The values considered for the sphere interior Reynolds number are Re_int ? 1000. The computations were focused on the influence of the sphere Peclet number, Pe, and Re_int on heat/mass transfer rate for Pe/(1 + μ) ? 10⁴.     

Template and template-free preparation of one-dimensional metallic nanostructures

In this article, we have studied and developed two approaches for organizing metallic nanoparticles into one-dimensional assemblies. The first uses DNA as a ‘template’ and allows the preparation of various silver nanostructures (‘beads-on-a-string’ or rod-like wires). The conductance of such nanostructures was demonstrated by employing a powerful technique, Electrostatic Force Microscopy (EFM). This technique gave us ‘contactless’ information about the electrical properties of silver nanostructures, aligned on a SiO₂/Si surface. Additionally, I–V characteristics of a single silver nanowire crossing two microelectrodes were recorded. The nanowire resistivity was estimated at 1.46 × 10⁻⁷ Ω m (at 300 K), which is one order of magnitude higher than that of bulk silver (1.6 × 10⁻⁸ Ω m). The second approach is a ‘template-free’ one, and exploits the binding ability of l-arginine, which favours the self-assembling of capped gold nanoparticles into gold nanochains. The results suggest that gold nanochains were formed due to dipole–dipole interaction between adjacent nanoparticles, which fuse together through an oriented attachment mechanism. Atomic force microscopy, TEM, UV–vis spectroscopy and X-ray diffraction were used to characterize the morphological, optical and structural properties of these metallic nanostructures.     

pH- and temperature-sensitive polymeric microspheres for drug delivery: the dissolution of copolymers modulates drug release

Most pH-/temperature-responsive polymers for controlled release of drugs are used as cross-linked hydrogels. However, the solubility properties of the linear polymers below and above the lower critical solution temperature (LCST) are not exploited. Here, the preparation and characterization of poly (N-isopropylacrylamide-co-methacrylic acid-co-methyl methacrylate) (poly (NIPAAm-co-MA-co-MM)) and poly (N-isopropylacrylamide-co-acrylamide) (poly (NIPAAm-co-AAm)), known as “smart” polymers (SP), is reported. Both poly (NIPAAm-co-MA-co-MM) and poly (NIPAAm-co-AAm) display pH- and temperature-responsive properties. Poly (NIPAAm-co-MA-co-MM) was designed to be insoluble in the gastric fluid (pH = 1.2), but soluble in the intestinal fluid (pH = 6.8 and 7.4), at the body temperature (37°C). Poly (NIPAAm-co-AAm) was designed to have a lower critical solution temperature (LCST) corresponding to 37°C at pH = 7.4, therefore it is not soluble above the LCST. The solubility characteristics of these copolymers were exploited to modulate the rate of release of drugs by changing pH and/or temperature. These copolymers were solubilized with hydrophobic cellulose acetate butyrate (CAB) and vitamin B₁₂ (taken as a water soluble drug model system) in an acetone/methanol mixture and dispersed in mineral oil. By a progressive evaporation of the solvent, the liquid droplets were transformed into loaded CAB/SP microspheres. Differential scanning calorimetric studies and scanning electron microscopy analysis demonstrated that the polymeric components of the microspheres precipitated separately during solvent evaporation forming small microdomains. Moreover, vitamin B₁₂ was found to be molecularly dispersed in both microdomains with no specific affinity for any polymeric component of microspheres. The release of vitamin B₁₂ was investigated as a function of temperature, pH, and the CAB/SP ratio.     

Investigation of carbon nanofibers as support for bioactive substances

In this paper we have studied the adsorption properties of various bio-active systems onto the surface of carbon nanofibers (CNF) synthesized by chemical vapor deposition (CVD). Amino acids (alanine, aspartic acid, glutamic acid) and glucose oxidase (GOx) were adsorbed on CNF and the results were compared with those obtained when activated carbon (AC) was used as support. CNF and AC properties (hydrophilic or hydrophobic properties) were characterized by the pH value, the concentration of acidic/basic sites and by naphthalene adsorption. CNF with immobilized GOx was additionally investigated as a highly sensitive glucose biosensor. An amperometric method was used in an original manner to detect the changes in the specific activity of GOx, immobilized longer time on CNF. The method demonstrates that not the whole enzyme adsorbed onto CNF can catalyze the oxidation of glucose from the solution.