Combined Treatment with Dif1stat<Superscript>®</Superscript> and Diet Reduce Plasma Lipid Indicators of Moderate Hypercholesterolemia More Effectively than Diet Alone: A Randomized Trial in Parallel Groups

An open-labeled randomized trial with parallel groups was carried out to study the effects of Dif1stat^® (Monascus purpureus–Linear aliphatic alcohols–Niacin) in the treatment of primary moderate hypercholesterolemia. The trial lasted 8 months. The patients, males and females, were assigned to two groups: A (#130), treated with diet, and B (#110) submitted to diet + Dif1stat^®. After 4 months, group A did not show significant changes in Total cholesterol (TC), LDL-cholesterol (LDLC), HDL-cholesterol (HDLC) or non-HDL-cholesterol (non-HDLC). The same group, showed a reduction in TC (–22%), LDLC (–30%) and non-HDLC (–27%) after 8 months (P ≤ 0.001). After 4 months, TC (–21.3%), LDLC (–29%), and non-HDLC (–26%) were significantly lowered in group B (P ≤ 0.001). In group B, TC, LDLC and non-HDLC showed a further reduction after 8 months: –29.4, –38 and –37%, respectively (P ≤ 0.001). Even triglycerides (TG) decreased significantly (–33%) (P ≤ 0.001). After 8 months, group B showed a significant reduction of TG (–33%) (P ≤ 0.001), when compared to group A. Some safety parameters were significantly reduced in both groups: AST and γ-GT in group A after 4 and 8 months, as well as ALT, AST and γ-GT in group B after 8 months (P ≤ 0.001). Dif1stat^®, given with a suitable diet, was well tolerated in the long-term and induced an anti-atherogenic plasma lipid and lipoprotein profile, in patients with moderate hypercholesterolemia.     

Azacrown Ethers with Naphthyl Branches. Fluorescence Properties,Protonation and Metal Coordination

Starting from 1,4,10,13-tetraoxa-7,16-diazacyclooctadecane, we have prepared two compounds by replacing the amine hydrogens with naphthyl or 3,5-bis(2′-oxymethylnaphthyl)benzyl units. The absorption and emission spectra of compounds 2 (N,N′-bis(2-naphthylmethyl)-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane) and 3 (N,N′-bis[3,5-bis(2′-oxymethylnaphthyl)benzyl]-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane) have been studied in CH₃CN:CH₂Cl₂ 1:1 (v/v) solution. For comparison purposes, the spectroscopic properties of N-methyl(2-methylnaphthalene)ethylamine (1) have also been investigated. For each compound, the absorption spectra are qualitatively very similar to that of naphthalene, with molar absorption coefficients as expected for the presence of one (1), two (2), and four (3) naphthyl chromophoric groups. The fluorescence spectra, however, are quite different from that of naphthalene. The naphthalene-type fluorescence (λ_max = 337 nm) is strongly quenched, particularly for compounds 1 and 2 which also exhibit a broad emission band in the visible region (λ_max ≈ 480 nm) assigned to a low lying charge-transfer excited state. In the case of compound 3, a quenched naphthalene-type band is accompanied by weak exciplex and excimer emissions. Upon titration with CF₃SO₃H, the charge transfer bands of 1 and 2 and the exciplex emission of 3 disappear and the naphthalene-type bands regain intensity. Titration plots show that in compounds 2 and 3 the protonation of the two nitrogens occurs stoichiometrically in two distinct steps. Titration with Zn²⁺ gives rise to 2.Zn²⁺ and 3.Zn²⁺ complexes. This article is dedicated to Professor Dedier Astruc.     

Vibrational analysis of functionalized polyolefins/poly(vinylchloride) blends

Polyolefins functionalized with diethylmaleate were mixed with poly(vinylchloride) (PVC) in different compositions. Intermolecular interactions involving the carbonyl groups of the side chains of the functionalized polyolefins and methine hydrogens of PVC were investigated by means of infrared spectroscopy. The major flexibility of the ester groups attached to the backbone chains, with respect to polyesters, seems to increase the capability of such groups to interact with groups of more polar polymers, thus allowing prediction of easier miscibility, which however also depends on the starting polyolefin structure and function-alization degree.     

The assessment of the damage probability of storage tanks in domino events triggered by fire

An approach aimed to the quantitative assessment of the risk caused by escalation scenarios triggered by fire was developed. Simplified models for the estimation of the vessel time to failure (ttf) with respect to the radiation intensity on the vessel shell were obtained using a multi-level approach to the analysis of vessel wall failure under different fire conditions. Each vessel “time to failure” calculated by this approach for the specific fire scenario of concern was compared to a reference time required for effective mitigation actions and related to the escalation probability. The failure probability of each vessel was correlated to the probability of scenarios involving multiple vessel failure as a consequence of the primary fire, thus allowing a comprehensive assessment of domino scenarios triggered by fire. The application of the methodology to the analysis of several case-studies allowed the estimation of the quantitative contribution of escalation events triggered by fire to the overall individual and societal risk indexes.     

Influence of mineral additions on the performance of 100% recycled aggregate concrete

A judicious use of resources, by using by-products and waste materials, and a lower environmental impact, by reducing carbon dioxide emission and virgin aggregate extraction, allow to approach sustainable building development. Recycled aggregate concrete (RAC) containing supplementary cementitious materials (SCM), if satisfactory concrete properties are achieved, can be an example of such sustainable construction materials.In this work concrete specimens were manufactured by completely replacing fine and coarse aggregates with recycled aggregates from a rubble recycling plant. Also RAC with fly ash (RA + FA) or silica fume (RA + SF) were studied.Concrete properties were evaluated by means of compressive strength and modulus of elasticity in the first experimental part. In the second experimental part, compressive and tensile splitting strength, dynamic modulus of elasticity, drying shrinkage, reinforcing bond strength, carbonation, chloride penetration were studied. Satisfactory concrete properties can be developed with recycled fine and coarse aggregates with proper selection and proportioning of the concrete materials.     

Study of metal protective hydrophobic coatings from waterborne polyurethane ionomers

A series of waterborne coatings obtained from aqueous dispersions of fluorinated polyurethane ionomers were characterized by Differential Scanning Calorimetry (DSC), Contact Angle measurements (CA), and Electrochemical Impedance Spectroscopy (EIS) with evaluation of water uptake and barrier properties at prolonged exposure. All the considered materials showed two glass transition temperatures and the formation of highly hydrophobic surfaces with CA values against water well above 100°. On the other hand the compositive parameters of the polymers—presence and concentration of cationic as well as anionic groups, linear or crosslinked molecular structure—showed a significant effect on the electrochemical behaviour. In particular it resulted that less water absorption is shown by coatings with lower ionic character, while crosslinked anionomer structures show excellent long-term barrier properties. The research offers useful indication towards the design of a new class of hydrophobic barrier coatings from aqueous dispersions.     

Combined Effects of Parallel and Series Detention Basins for Flood Peak Reduction

A simple analytical method is proposed that allows a preliminary evaluation of the overall efficiency of a detention basin system for flood risk reduction in a specific target section. Solutions are provided both for parallel and series systems, under some simplifying assumptions concerning the linearity of detention basin, river network and watershed responses. Further, for the series configuration a regressive model is proposed for the computation of the overall efficiency, because of the complexity of analytical solution. A case study is also presented, where the overall efficiency of a system of nine detention basins is computed by means of both the analytical and the regressive model. Results are discussed to assess the different influence of detention basins in parallel or in a series system.     

Hyperazeotropic ethanol salted-out by extractive distillation. Theoretical evaluation and experimental check

A distillation process for the production of hyperazeotropic ethanol from a dilute wine obtained from the fermentation of biomass has been studied. This process utilizes the coupling of a soft preconcentration stage and of a dehydration stage based on the salting-out effect produced by calcium chloride on the ethanol in an aqueous solution, with the disappearance of the azeotrope. The salt is employed in a close cycle, due to the presence of a regeneration stage, therefore no consumption of calcium chloride is noticed.

The distillation process utilizes one column consisting of two sections operating at different pressures in order to reach an efficient heat recovery.

In this paper, a simplified flow-sheet of the process and the principal operating conditions of the distillation column are illustrated. When compared with other processes, conventional or under development, this one is characterized by the promising reduction of the specific energy requirement.

The operating conditions chosen for the distillation with salt have been experimentally checked using a laboratory column running continuously with calcium chloride as salting-out agent. Moreover, the experiments confirmed the reliability of the mathematical model of the process. Further experiments are in progress with the aim of utilizing a mixture of salts which can be fed from the bottom of the dehydration section back to the fermentor, so that the salt regeneration stage can be reduced.     

Antioxidant activity,color chromaticity coordinates,and chemical characterization of monofloral honeys from Morocco

The bioprospecting of several monofloral Moroccan honeys was carried out. The antiradical activity expressed as mmol Trolox equivalents/kg of honey and evaluated by 2,2-diphenyl-1-picrylhydrazyl assay, ranged from 0.15 for euphorb honey to 1.08 for citrus honey. The antioxidant activity expressed as mmol Fe²⁺/kg and evaluated by ferric ion reducing antioxidant power assay, ranged from 0.96 for euphorb honey to 4.74 for orange honey. The total phenol content was evaluated by colorimetric assay, while the color attributes were evaluated as transmittance data. Significant Pearson correlation factors were found between total polyphenol amount and antioxidant activity and between color attributes and antioxidant activity. Furthermore the chemical composition of volatile organic compounds was determined. The volatile organic compounds chemical composition of the studied honeys was mainly represented by terpene and benzene derivatives, Maillard reaction products, isoprenoids, and hydrocarbons. The volatiles fingerprint, as well as a targeted high-performance liquid chromatography analysis of the polar components, was used to tentatively confirm the declared botanical origin of the samples studied.