Peptide-containing aggregates as selective nanocarriers for therapeutics

New nanocarriers are obtained by assembling two amphiphilic monomers: one containing the bioactive peptide CCK8 spaced, by a polydisperse poly(ethylene glycol), from two hydrophobic tails ((C18)2PEG2000CCK8), and the other containing a chelating agent able to give stable radiolabeled indium-111 complexes linked to the same hydrophobic moiety ((C18)2DTPAGlu). The size and shape of the supramolecular aggregates were structurally characterized by dynamic light scattering, small-angle neutron scattering, and cryogenic transmission electronic microscopy. Under the experimental conditions we investigated (pH 7.4 and molar ratio between monomers 30:70), there is the presence of high polydisperse aggregates: rod-like micelles with a radius of approximately 40 A and length >700 A, open bilayer fragments with thickness approximately 65 A, and probably vesicles. The presence of the bioactive peptide well exposed on the external surface of the aggregate allows selective targeting of nanocarriers towards the cholecystokinin receptors overexpressed by the cancerous cells. In vitro binding assays and in vivo biodistribution studies by nuclear medicine experiments using indium-111 are reported. Moreover, preliminary data concerning the drug loading capability of the aggregates and their drug efficiency on the target cells is reported by using the cytotoxic drug doxorubicin. Incubation of receptor-positive and control cells with peptide-containing aggregates filled with doxorubicin shows significantly lower cell survival in receptor-expressing cells relative to the control, for samples incubated in the presence of doxorubicin.     

Selective hydrogenation of benzene to cyclohexene using a suspended Ru catalyst in a mechanically agitated tetraphase reactor

The reactivity on unsupported Ru based catalyst in benzene selective hydrogenation to cyclohexene has been studied. The reaction has been carried out in a tetraphase slurry reactor at 423 K, at 5 MPa, in the presence of two liquid phases: benzene and an aqueous solution of ZnSO₄ 0.6 mol l⁻¹. A detailed study of the influence of the transport phenomena on the reactivity of the catalyst has been carried out. No correlation has been found between the characteristic numbers of Weeler–Weisz and of Carberry mass transport at external liquid/solid interface or into the catalyst pores for both benzene and hydrogen and the selectivity of the catalyst. The main features of the catalysts are the strong dependence between the catalysts preparation procedure and their activity and selectivity. In particular the influence of the alkaline or the earth alkaline hydroxide, employed in the precipitation of the Ru precursor, on the selectivity, has been studied. Hydrogen chemisorption measurements indicate that the amount of weakly adsorbed hydrogen depends on the nature of the base employed in the precipitation step.     

19-Azasqualene-2,3-epoxide and its N-oxide: Metabolic fate and inhibitory effect on sterol biosynthesis in Saccharomyces cerevisiae

19-Azasqualene-2,3-epoxide was more inhibitory than the corresponding N-oxide against 2,3-oxidosqualene cyclase (OSC) solubilized from Saccharomyces cerevisiae (IC₅₀ 7±2 and 25±5 μM, respectively). Both compounds showed a reversible, noncompetitive-type inhibition on solubilized OSC. Different inhibitory properties between the compounds were especially evident when measuring [¹⁴C]acetate incorporation into nonsaponifiable lipids extracted from treated cells. In cells treated with 19-azasqualene-2,3-epoxide at 30 μM, the radioactivity associated with the oxidosqualene fraction, which was negligible in the controls, rose to over 40% of the nonsaponifiable lipids, whereas it remained at a slightly appreciable level in cells treated with the N-oxide derivative under the same conditions. 19-Azasqualene-2,3-epoxide was also more effective than the N-oxide as a cell growth inhibitor (minimal concentration of compound needed to inhibit yeast growth: 45 and >100 μM, respectively). The two inhibitors underwent different metabolic fates in the yeast: while 19-azasqualene-2,3-epoxide did not undergo any transformation, its N-oxide was actively reduced to the corresponding amine in whole and in “ultrasonically stimulated” cells. The N-oxide reductases responsible for this transformation appear to be largely confined within the microsomal fractions and require NADPH for their activity. A possible relationship between the inhibitory properties of the two compounds and their metabolic fates is discussed.     

Casting process and comparison of the properties of adapted load-sensitive magnesium alloys

Magnetic magnesium alloys can be utilized as a load sensitive material, in which the inverse magnetostrictive effect is used in order to measure the actual loads in structural components manufactured from such lightweight sensor alloys. To achieve a material which exhibits magnetic properties, Mg is alloyed with ferromagnetic materials like cobalt or samarium-cobalt. Alloying elements commonly used with Mg are utilized to improve the mechanical properties of these alloys, which however may have a slight negative impact on the magnetic sensitivity. In this work, two separate magnetic Mg alloys are compared, each with properties matched to the opposing requirements: (a) high load sensitivity and (b) satisfactory mechanical properties, respectively. The precipitation behavior of the ferromagnetic constituent Co in Mg together with other alloying elements is shown on the basis of SEM images. In addition, the dissolving behavior of the Co powder during the casting process of a binary Mg–Co alloy is investigated. Cyclic loading tests employing harmonic analyses of eddy current signals are utilized in order to verify the alloys’ sensory properties. The mechanical properties are investigated using tensile tests.     

An effective multipurpose building block for 3D electropolymerisation: 2,2′-Bis(2,2′-bithiophene-5-yl)-3,3′-bithianaphthene

Novel thiophene-based oligomer, 2,2′-bis(2,2′-bithiophene-5-yl)-3,3′-bithianaphthene (TX), was designed and synthesized, and its electrochemical and spectral properties characterised. TX was readily polymerised electrochemically to form well organized conducting homopolymer films on various solid electrode substrates. Moreover, it was successfully used for deposition by electropolymerisation of electrochemically active thin films of co-polymers with three different monomers of functionalised bis(2,2′-bithienyl)methane derivatives. It appeared that TX was an effective crosslinker and 3D promoter in these electropolymerisations involving co-monomers intrinsically showing limited aptitude for the electropolymerisation or forming polymer films of low conductivity. This attractive TX ability stems from combination of its (i) high conjugation efficiency in each of the two planar moieties, (ii) intrinsic 3D structure on account of the presence of the central node, and (iii) intrinsic regioselectivity in electropolymerisation on account of the positions of the two available free α-thiophene sites.     

N-(Anilinoethyl)amide Melatonergic Ligands with Improved Water Solubility and Metabolic Stability

The MT₂-selective melatonin receptor ligand UCM765 (N-(2-((3-methoxyphenyl)(phenyl)amino)ethyl)acetamide), showed interesting sleep inducing, analgesic and anxiolytic properties in rodents, but suffers from low water solubility and modest metabolic stability. To overcome these limitations, different strategies were investigated, including modification of metabolically liable sites, introduction of hydrophilic substituents and design of more basic derivatives. Thermodynamic solubility, microsomal stability and lipophilicity of new compounds were experimentally evaluated, together with their MT₁ and MT₂ binding affinities. Introduction of a m-hydroxymethyl substituent on the phenyl ring of UCM765 and replacement of the replacement of the N,N-diphenyl-amino scaffold with a N-methyl-N-phenyl-amino one led to highly soluble compounds with good microsomal stability and receptor binding affinity. Docking studies into the receptor crystal structure provided a rationale for their binding affinity. Pharmacokinetic characterization in rats highlighted higher plasma concentrations for the N-methyl-N-phenyl-amino derivative, consistent with its improved microsomal stability and makes this compound worthy of consideration for further pharmacological investigation.     

Cold sintering of diatomaceous earth

Diatomite, a natural silicate-based sedimentary rock, was densified by cold sintering at room temperature and 150°C under various pressures (100, 200, and 300 MPa) and using different NaOH water solutions (0–3 M). The relative density of cold sintered diatomite can be as high as 90%, a condition that can be achieved by conventional firing only at 1200–1300°C. The cold sintered materials maintain the same mineralogical composition of the starting powder (quartz, glass, and illite) and are constituted by well-deformed and flattened grains oriented orthogonally to the applied pressure. Conversely, an evident phase evolution takes place upon conventional firing with the formation of cristobalite and mullite. The bending strength of cold sintered artifacts can exceed 40 MPa and increases to ≈80 MPa after post-annealing at 800°C, such mechanical strength is much larger than that of conventionally pressed samples sintered at 800°C, which is only ≈1 MPa.     

Film Blowing of Biodegradable Polymer Nanocomposites for Agricultural Applications

Films for agricultural applications, such as greenhouses films or mulching films are generally made of polyolefins such as linear low-density polyethylene (LLDPE) or low-density polyethylene. However, the use of biodegradable and/or compostable polymers is increasing, which enjoy the additional advantage that they can be left on the site since a fine life would be gradually assimilated to the underlying soil. Nevertheless, biodegradable polymeric films often do not have suitable mechanical performances. In this work, biodegradable polymer-based nanocomposite films are prepared by film blowing and compared with traditional LLDPE based nanocomposites. In particular, a biodegradable polymer blend and two different inorganic nanofillers (an organo-modified clay and a calcium carbonate with a hydrophobic coating) are used for the preparation of the nanocomposites. A detailed investigation of obtained materials is performed through rheological, mechanical, and optical characterizations. Adding nanofillers led to an increase of rigidity and tear strength of blown films without negatively affecting their ductility.     

Insights into the Action Mechanism of the Antimicrobial Peptide Lasioglossin III

Lasioglossin III (LL-III) is a cationic antimicrobial peptide derived from the venom of the eusocial bee Lasioglossum laticeps. LL-III is extremely toxic to both Gram-positive and Gram-negative bacteria, and it exhibits antifungal as well as antitumor activity. Moreover, it shows low hemolytic activity, and it has almost no toxic effects on eukaryotic cells. However, the molecular basis of the LL-III mechanism of action is still unclear. In this study, we characterized by means of calorimetric (DSC) and spectroscopic (CD, fluorescence) techniques its interaction with liposomes composed of a mixture of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-rac-phosphoglycerol (POPG) lipids as a model of the negatively charged membrane of pathogens. For comparison, the interaction of LL-III with the uncharged POPC liposomes was also studied. Our data showed that LL-III preferentially interacted with anionic lipids in the POPC/POPG liposomes and induces the formation of lipid domains. Furthermore, the leakage experiments showed that the peptide could permeabilize the membrane. Interestingly, our DSC results showed that the peptide-membrane interaction occurs in a non-disruptive manner, indicating an intracellular targeting mode of action for this peptide. Consistent with this hypothesis, our gel-retardation assay experiments showed that LL-III could interact with plasmid DNA, suggesting a possible intracellular target.