Cold Spray Deposition of Freestanding Inconel Samples and Comparative Analysis with Selective Laser Melting

Cold spray offers the possibility of obtaining almost zero-porosity buildups with no theoretical limit to the thickness. Moreover, cold spray can eliminate particle melting, evaporation, crystallization, grain growth, unwanted oxidation, undesirable phases and thermally induced tensile residual stresses. Such characteristics can boost its potential to be used as an additive manufacturing technique. Indeed, deposition via cold spray is recently finding its path toward fabrication of freeform components since it can address the common challenges of powder-bed additive manufacturing techniques including major size constraints, deposition rate limitations and high process temperature. Herein, we prepared nickel-based superalloy Inconel 718 samples with cold spray technique and compared them with similar samples fabricated by selective laser melting method. The samples fabricated using both methods were characterized in terms of mechanical strength, microstructural and porosity characteristics, Vickers microhardness and residual stresses distribution. Different heat treatment cycles were applied to the cold-sprayed samples in order to enhance their mechanical characteristics. The obtained data confirm that cold spray technique can be used as a complementary additive manufacturing method for fabrication of high-quality freestanding components where higher deposition rate, larger final size and lower fabrication temperatures are desired.     

Gas Sensing of NiO‐SCCNT Core–Shell Heterostructures: Optimization by Radial Modulation of the Hole‐Accumulation Layer

Hierarchical core–shell (C–S) heterostructures composed of a NiO shell deposited onto stacked‐cup carbon nanotubes (SCCNTs) are synthesized by atomic layer deposition (ALD). A film of NiO particles (0.80–21.8 nm in thickness) is uniformly deposited onto the inner and outer walls of the SCCNTs. The electrical resistance of the samples is found to increase of many orders of magnitude with the increasing of the NiO thickness. The response of NiO–SCCNT sensors toward low concentrations of acetone and ethanol at 200 °C is studied. The sensing mechanism is based on the modulation of the hole‐accumulation region in the NiO shell layer upon chemisorption of the reducing gas molecules. The electrical conduction mechanism is further studied by the incorporation of an Al₂O₃ dielectric layer at NiO and SCCNT interfaces. The investigations on NiO–Al₂O₃–SCCNT, Al₂O₃–SCCNT, and NiO–SCCNT coaxial heterostructures reveal that the sensing mechanism is strictly related to the NiO shell layer. The remarkable performance of the NiO–SCCNT sensors toward acetone and ethanol benefits from the conformal coating by ALD, large surface area of the SCCNTs, and the optimized p‐NiO shell layer thickness followed by the radial modulation of the space‐charge region.     

Poly(DL-lactide-co-ε-caprolactone) and poly(DL-lactide-co-glycolide) blends for biomedical application: Physical properties,cell compatibility,and in vitro degradation behavior

Poly(DL-lactide-co-ε-caprolactone) (PLCL) and poly(DL-lactide-co-glycolide) (PLGA) blends of various compositions were prepared. Fractured sections of PLCL/PLGA blends did not evidence phase separation and blend glass transition temperatures suggested some degree of blend compatibility. The elastic modulus showed a negative deviation from the additive law of mixture. Superior biocompatibility in terms of fibroblast NIH 3T3 cell adhesion and proliferation, better mechanical properties, and a more homogeneous phase were obtained with PLCL/PLGA 25/75 blend. Rapid degradation of PLCL phase (4–8 weeks) in PLCL/PLGA 25/75 blend led to a porous structure, which makes it a potential candidate for drug delivery systems.     

The underground cavity network of south-eastern Rome (Italy): an evolutionary geological model oriented to hazard assessment

There are many abandoned underground mines beneath the city of Rome, created in the Pleistocene pyroclastic deposits over thousands of years. These pose a serious public safety risk hence the study was undertaken to better assess the stability of the underground workings. The Villa de Sanctis public park was selected as a suitable test site, as in this area the cavity network can be inspected and the different steps of the progressive migration of voids toward the surface can be identified. In addition to an underground geological survey, geophysical investigations were undertaken to elucidate some key characteristics of the involved lithological units, including elastic stiffness and layer thickness. Recommendations are made for further studies of the accessible and inaccessible areas.     

An Adaptive Control System to Deliver Interactive Virtual Environment Content to Handheld Devices

Wireless communication advances have enabled emerging video streaming applications to mobile handheld devices. For example, it is possible to display and interact with complex 3D virtual environments on mobile devices that don’t have enough computational and storage capabilities (e.g. smart phones, PDAs) through remote rendering techniques, where a server renders 3D data and streams the corresponding image flow to the client. However, due to fluctuations in bandwidth characteristics and limited mobile device CPU capabilities, it is extremely challenging to design effective systems for streaming interactive multimedia over wireless networks. This paper presents a novel approach based on a controller that can automatically adjust streaming parameters basing on feedback measures from the client device. Experimental results prove the effectiveness of the proposed solution in coping with bandwidth changes, thus providing high Quality of Service (QoS) in remote visualizations.     

Fingerprint Clustering with Bounded Number of Missing Values

The problem of clustering fingerprint vectors with missing values is an interesting problem in Computational Biology that has been proposed in Figueroa et al. (J. Comput. Biol. 11(5):887–901, 2004). In this paper we show some improvements in closing the gaps between the known lower bounds and upper bounds on the approximability of variants of the biological problem. Moreover, we have studied two additional variants of the original problem proposed in Figueroa et al. (Proc. 11th Computing: The Australasian Theory Symposium (CATS), CRPIT, vol. 41, pp. 57–60, 2005). We prove that all such problems are APX-hard even when each fingerprint contains only two unknown positions and we present a greedy algorithm that has constant approximation factors for these variants. Despite the hardness of these restricted versions of the problem, we show that the general clustering problem on an unbounded number of missing values such that they occur for every fixed position of an input vector in at most one fingerprint is polynomial time solvable.     

Easy detectable isocyanate in the reaction with gelatin

Gelatin reactivity with isocyanate was studied by using the easy detectable 1-naphthyl-isocyanate (NphI). Four different NphI/gelatin feed ratios were investigated with NphI molar amount ranging between 1/10 and 1/1 with respect to the possible reactive groups of gelatin. The reactions were carried out at 45 °C in DMSO as solvent, under nitrogen atmosphere. Modified gelatin samples were characterized by IR, UV–VIS, fluorescence spectroscopies as well as by proton and DOSY NMR. Spectroscopy results allow to evidence the presence of both bonded and unbonded naphthyl derivatives in the gelatin samples. Unbonded species were present particularly at the highest NphI/gelatin feed ratio and their formation was correlated to the increasing competition of the reaction with water since the amount of available reactive groups on gelatin was comparable or smaller than the amount of residuum water in dry gelatin.     

A methodology for verification of digital items in fair exchange protocols with active trustee

Fair exchange constitutes a fundamental mechanism for electronic commerce. Fair exchange assumes that it is possible to verify the correctness of the digital items to be exchanged. However, when an item is indescribable , i.e., it cannot be formally specified, its verification becomes difficult, if not impossible. This hinders a practical deployment of fair exchange. We propose a methodology for the verification of indescribable digital items. The methodology allows a participant in a fair exchange protocol to personally verify the indescribable item without giving him any practical advantage over the other participant, and therefore without violating the fairness imposed by the protocol.