Influence of fluoride-containing solutions on the translucency of flowable composite resins

The aim of this study was to evaluate the influence of fluoride-containing solutions on the translucency of flowable composite resins, with respect the immersion time. Flow-It! (FI) and Natural Flow (NF) composite resins and three commercial brands of fluoride-containing solutions (Fluordent, Fluorgard and Oral B) were used. Specimens were prepared and stored in the solutions at 37°C, until the measurements were made after the following treatments: T1 - after 1 hour in relative humidity; T2 - after 1 h in solution; T3 - 24 h; T4 - 48 h; T5 - after a week; from T9, the measurements were accomplished weekly, up to 30-day immersion. To obtain translucency values an electrophoresis equipment was employed. Data were submitted to ANOVA and Tukey tests. The results disclosed that NF showed highest values of translucency and was statistically different from FI (p< 0.001). As regards the solutions, Fluordent and Oral B presented similar values and were statistically superior to Fluorgard (p< 0.05). Concerning the immersion time, similar results were observed for the different evaluation periods. It may be concluded that the fluoride-containing solutions affected the translucency of the composite resins, independently of the materials used. Among the tested resins, NF presented the best performance.     

A robustness result for stochastic control

The solution of a stochastic control problem depends on the underlying model. The actual real world model may not be known precisely and so one solves the problem for a hypothetical model, that is in general different but close to the real one; the optimal (or nearly optimal) control of the hypothetical model is then used as solution for the real problem.In this paper, we assume that, what is not precisely known, is the underlying probability measure that determines the distribution of the random quantities driving the model. We investigate two ways to derive a bound on the suboptimality of the optimal control of the hypothetical problem when this control is used in the real problem. Both bounds are in terms of the Radon–Nikodym derivative of the underlying real world measure with respect to the hypothetical one. We finally investigate how the bounds compare to each other.     

Antibacterial activity of glass ionomer cement modified by zinc oxide nanoparticles

This study evaluated the antibacterial activity of zinc oxide nanoparticles incorporated into self‐cured glass ionomer cement (GIC) and light‐cured resin‐reinforced GIC on Streptococcus mutans biofilm. The GICs, Fuji II (GC America) and Fuji II LC (GC America), were incorporated with nanoparticles at concentrations of 0%, 1%, and 2% by weight, and the biofilm maturation time was one and seven days. Circular specimens of each GIC type were prepared. The antibacterial activity was evaluated by determining the number of colony forming units of S. mutans strain per milliliter. Morphology of the biofilm was analyzed by scanning electron microscopy (SEM). The data obtained for each GIC were analyzed by two‐way ANOVA (α = 5%). For chemically activated GIC, no significant difference was observed in relation to the time of biofilm maturation (p = 0.744), concentration of nanoparticles (p = 0.966), and their interaction (p = 0.800). The results from analysis of GIC modified by light‐polymerized resin showed that only of the maturing time significantly affected the number of adhered cells on the biofilm (p = 0.034, F = 4.778). The more mature the biofilm, higher the number of cells. SEM analysis showed no change in cell morphology in relation to the type of GIC, maturation time, and nanoparticles concentration. We conclude that the inclusion of zinc oxide nanoparticles at concentrations of 1% and 2% by weight into the GICs evaluated here, did not promote their antimicrobial activity against S. mutans.     

Equivalent area nonlinear static and dynamic analysis of electrostatically actuated microstructures

Nonlinear dynamic investigation of electrostatically actuated micro-electro-mechanical-system (MEMS) microcantilever structures is presented. The nonlinear analysis aims to better quantify, than the linear model, the instability threshold associated with electrostatically actuated MEMS structures, where the pull-in voltage of the microcantilever is determined using a phase portrait analysis of the microsystem. The microcantilever is modeled as a lumped mass-spring system. The nonlinear electrostatic force is incorporated into the lumped microsystem through an equivalent area of the microcantilever for a given electrostatic potential. Electro-mechanical force balance plots are obtained for various electrostatic potentials from which the static equilibrium positions of the microcantilever are obtained and the respective conservative energy values are determined. Subsequently, phase portrait plots are obtained for the corresponding energy values from which the pull-in voltage is estimated for the microsystem. This pull-in voltage value is in good agreement with the previously published results for the same geometric and material parameters. The results obtained for linear electrostatic models are also presented for comparison.     

Visual Evaluation of Binding to Mucosal Cells of a Medical Device Against the Common Cold

The objective of this study was to investigate the possibility of visualizing the ability of hydroxypropylmethylcellulose (HPMC) and a nasal spray (First Defense), in which the bioadhesive is HPMC, to bind to human mucosal cells using inorganic (black carbon particles and Congo red dye) and organic markers (Escherichia coli). A significant reduction in the bacterial adhesiveness has been observed. Our findings indicate the possibility of counteracting the lock-and-key mechanism of microorganism adhesion using the bioadhesive properties of polymers, such as HPMC, in First Defense to prevent a possible contact between adhesins and complementary receptors.     

Spatial dependence of Raman frequencies in ordered and disordered monolayer graphene

A micro-Raman investigation was carried out on several flakes of monolayer (1 L) graphene obtained by the micro-mechanical exfoliation technique and, then, put on a c-Si wafer coated by a SiO₂ thin film. Some of the 1 L zones show a remarkable dispersion of the 2D-overtone wavenumber as a function of the position within the graphene sheet, and, in some case, a significant broadening of the E_2g phonon (G band) is associated to this wavenumber shift of 2D-band. Such effects were studied, in particular, for a 1 L zone characterized by a rather strong lattice disorder, as revealed by the strong D/G band intensity ratio, and for other zones quite ordered, showing a vanishing intensity of the D band. Moreover, by moving along different directions within 1 L graphene sheets, different trends for 2D wavenumber and E_2g phonon bandwidth vs. position were observed. All these reported behaviours are explained in terms of different distributions of intrinsic uniaxial strain occurring within the 1 L graphene sheets.     

Surface-enhanced Raman scattering study of nano-sized organic carbon particles produced in combustion processes

Surface-enhanced Raman scattering (SERS) has been employed for the first time to characterize nano-sized organic carbon (NOC) particles produced in ordinary combustion processes. Ag-coated glass microparticles, used as SERS substrate, provide a Raman scattering cross section enhancement up to five orders of magnitude, which allows sample investigation at low concentration level. The observed spectral features supply a deeper insight on the chemical properties of the investigated combustion product. In addition, the high sensitivity of the SERS technique might be useful to test and characterize the toxicity of NOC particles.     

Impact of SGLT2 Inhibitors on Heart Failure: From Pathophysiology to Clinical Effects

Heart failure (HF) affects up to over 20% of patients with type 2 diabetes (T2DM), even more in the elderly. Although, in T2DM, both hyperglycemia and the proinflammatory status induced by insulin resistance are crucial in cardiac function impairment, SGLT2i cardioprotective mechanisms against HF are several. In particular, these beneficial effects seem attributable to the significant reduction of intracellular sodium levels, well-known to exert a cardioprotective role in the prevention of oxidative stress and consequent cardiomyocyte death. From a molecular perspective, patients’ exposure to gliflozins’ treatment mimics nutrient and oxygen deprivation, with consequent autophagy stimulation. This allows to maintain the cellular homeostasis through different degradative pathways. Thus, since their introduction in the clinical practice, the hypotheses on SGLT2i mechanisms of action have changed: from simple glycosuric drugs, with consequent glucose lowering, erythropoiesis enhancing and ketogenesis stimulating, to intracellular sodium-lowering molecules. This provides their consequent cardioprotective effect, which justifies its significant reduction in CV events, especially in populations at higher risk. Finally, the updated clinical evidence of SGLT2i benefits on HF was summarized. Thus, this review aimed to analyze the cardioprotective mechanisms of sodium glucose transporter 2 inhibitors (SGLT2i) in patients with HF, as well as their clinical impact on cardiovascular events.