Design and characterization of a one‐compartment scale‐down system for simulating dissolved oxygen tension gradients

BACKGROUND: A laboratory scale one‐compartment scale‐down system (1‐CSDS), used to generate dissolved oxygen tension (DOT) gradients was designed and characterized. The system consists of a 1.5‐L stirred‐tank bioreactor coupled to an automatic DOT controller that changes the oxygen partial pressure in the inlet gas through a feedback proportional–integral–derivative algorithm, while maintaining the hydrodynamic conditions constant. Oscillatory control of DOT was achieved by employing time‐dependent square wave or sinusoidal setpoints. RESULTS: The 1‐CSDS can be modeled as a first‐order dynamic system, but showing a permanent lag between the system response and the setpoint. The 1‐CSDS had a faster response rate for generating oscillating DOT when a square wave setpoint was used rather than a sinusoidal setpoint. The 1‐CSDS generated symmetric DOT oscillations at periods above of 100 s. CONCLUSION: The 1‐CSDS is suited to investigate the responses of microorganisms and cells, of biotechnological importance, to oscillatory DOT conditions. It was found that the response of the 1‐CSDS was limited by the k_La. Copyright © 2010 Society of Chemical Industry     

Effects of thermal annealing on the optical characteristics of k -na + waveguides

We present a systematic study of the changes induced in the refractive-index profile of different sets of K -Na + ion-exchanged waveguides on soda-lime and BK7 substrates because of thermal annealing in the presence or absence of salt vapors. The concentration of potassium is recovered by secondary ion mass spectrometry, and the propagation losses are measured by means of the three-prism configuration.     

A pilot study on the content and the release of Ni and other allergenic metals from cheap earrings available on the Italian market

The capability of alloys used in cheap jewellery to release metal ions on contact with the skin causing allergic contact dermatitis (ACD) is generally acknowledged. To reduce the diffusion of the Ni-induced ACD the Council Directive 94/27/EC [Council Directive 94/27/EC of 30 June 1994. Official Journal L 188, 22/07/1994, 1.] limited the total Ni content in alloys and its release rate in artificial sweat. In this work, three different aspects were explored: i) the frequency of skin sensitization to Ni-containing earrings in patients before and after the introduction of the Directive's limit; ii) metal composition of alloys by X-ray analysis; iii) metal leaching in artificial sweat followed by Sector Field Inductively Coupled Plasma Mass Spectrometry (SF-ICP-MS) quantification. Well-known allergenic metals, as Ni, Cr and Co, and possible emergent allergens, as Al, Ag, Au, Cd, Cu, Fe, Ir, Mn, Pb, Pd, Pt, Rh, Sn, V and Zn, were studied. Results showed that the frequency of allergy due to earrings did not decrease after the introduction of the Ni limit: in 1994 and in 2005 patients positive to Ni patch tests were 54.3% and 53.5%, respectively. The earring components analyzed were Fe-based or alloys of Cu/Zn or Fe/Cr/Ni, plated with a thin film of precious metal (Ag, Au) which, in several cases, was combined with a Ni layer beneath. Five out of 10 items were not in compliance with the Ni Directive 94/27/EC having a total Ni content >0.05%. In three cases the release of Ni concentrations was higher than the safe sensitizing limit given by the above mentioned Regulation (i.e., <0.5 microg/cm(2)/week). The release of Cu and Zn was very variable among the different pieces (Cu: 0.134-30.9 microg/cm(2)/week; Zn: 0.141-160 microg/cm(2)/week); two objects released high amounts of Fe (358 and 586 microg/cm(2)/week) and one released considerable Mn (21 microg/cm(2)/week). Lead was released from 70% of the objects, while Ag, Al, Cd, Co, Cr and Sn from ca. 30% of the items and concentrations of these elements were well below 0.5 microg/cm(2)/week. Vanadium was released by only one item whereas Au, Ir, Pd, Pt and Rh were never leached.     

我国省会城市势力圈划分及与其行政范围的叠合分析

用HAP软件对全国省会城市(含直辖市)势力圈进行划分,比较势力圈的面积大小及分布情况,并在势力圈基础上叠加省域行政范围,揭示省会城市势力圈与省域行政范围的相互关系,研究成果可为全国行政区划调整等提供参考。     

Study of modeling and simulation of full digital controlled PMIG／MAG welding system based on Matlab／Simulink

This paper presents an integrated simulation model for full digital controlled PMIG/MAG welding system with Matlab/Simulink, and it consists of power inverter, digital control system and dynamic arc-load model. An integrated simulation study was done for fuU digital PMIG/MAG welding, and a method of connecting dynamic arc-load model to the system with controlled current source was presented, in addition, the simulation results were utilized to study the issues of digital control PMIG/MAG welding in this paper. The experimental results validated the developed simulation model, and this simulation study can be applied in implementation of the full digital PMIG/MAG welding and analysis of system dynamic process.     

Microstructure and properties of TiB/Ti-6Al-4V coatings produced with laser treatments

TiB/Ti-6Al-4V metal-matrix composite (MMC) layers were produced on Ti-6Al-4V substrates by laser cladding. A TiB₂/Ti powder mixture was used as a precursor to obtain a dispersion of TiB needles in the Ti alloy matrix, with the aid of an exothermic reaction between TiB₂ and Ti. A eutectic microstructure was obtained that consisted of an extremely homogeneous dispersion of TiB eutectic needles in the Ti alloy matrix, having a volume fraction as high as 0.33. Also, an equilibrium-like microstructure was found, consisting of a dispersion of both primary and eutectic TiB needles inside the Ti alloy matrix. An analysis of the geometry of the layers was performed and proved successful in determining the percentage of B. Further, it correctly predicted the variation of atomic B content as a function of laser power. The relative wear resistance coefficient, defined as the wear coefficient of the uncoated matrix divided by that of coating, shows an improvement by a factor as high as 1500 for the eutectic microstructure. This paper was presented at the 2nd International Surface Engineering Congress sponsored by ASM International, on September 15–17, 2003, in Indianapolis, Indiana, and appeared on pp. 411–18 of the Proceedings.     

Role of environmental variables on the stress corrosion cracking of sensitized AISI type 304 stainless steel (SS304) in thiosulfate solutions

The stress corrosion cracking (SCC) behavior of sensitized AISI type 304 stainless steel (SS304) has been studied in dilute thiosulfate solutions as a function of thiosulfate concentrations and applied potentials. The susceptibility to SCC was observed to increase with thiosulfate concentrations and applied potentials. The addition of boric acid produced the reverse effect. A critical potential was found to exist, below which no SCC took place. Potential fluctuations, as recorded in the tests under open circuit conditions, appeared to be correlated with crack initiation and propagation during SCC. Current fluctuations observed in the controlled potential tests also gave indications of crack nucleation; however, at higher applied potentials such fluctuations were absent. The formation and presence of martensite in the specimens seemed to have a minor role in the overall SCC process. The aggressiveness of the thiosulfate concentration was also an important factor in determining the degree of susceptibility to SCC. The results obtained in the slow strain rate tests under open circuit as well as under potential-controlled conditions suggested a film ruptureanodic dissolution type of mechanism operative during SCC of sensitized SS304 in thiosulfate solutions.     

利用有机硅高沸物制备乳化硅油及脱膜剂

实验主要利用有机硅副产物高沸物生产系列有价值的下游产品乳化硅油及脱膜剂.介绍了实验的基本原理、主要工艺操作步骤、所使用原材料及产品质量标准,此产品在一些工业装置上使用效果较佳,有一定应用价值.