Mechanical properties of virgin and recycled polyolefin‐based composite laminates reinforced with jute fabric

Polyolefin‐based composite laminates reinforced with jute fabric were prepared by compression molding and investigated in terms of flexural properties and impact behavior. The use of a virgin polypropylene as the matrix was compared with two polyolefin matrices coming from discarded car bumpers and selected packaging wastes, respectively, and mainly constituted by mixtures of polyethylene and polypropylene resins. The influence of a coupling agent (maleated polypropylene) was always considered in order to improve the interfacial adhesion and, consequently, the composite strength. The effect of this coupling agent, clearly dependent on the amount of polypropylene phase in the overall mixture, was found to be satisfactory only in the case of virgin polypropylene‐based systems. These latter, in presence of maleated polypropylene, have shown higher flexural parameters, lower propagation energy and higher breaking impact load with respect to uncompatibilized ones. Results were supported by morphological observations of impact surfaces, always highlighting a poor adhesion at the reinforcement–matrix interface except in compatibilized virgin polypropylene‐based laminates. POLYM. COMPOS., 36:2022–2029, 2015. © 2014 Society of Plastics Engineer     

Straightforward modeling of dynamic I–V characteristics for microwave FETs

This work presents a straightforward approach aimed at modeling the dynamic I–V characteristics of microwave active solid‐state devices. The drain‐source current generator represents the most significant source of nonlinearity in a transistor and, therefore, its correct modeling is fundamental to predict accurately the current and voltage waveforms under large‐signal operation. The proposed approach relies on using a small set of low‐frequency time‐domain waveform measurements combined with numerical optimization‐based estimation of the nonlinear model parameters. The procedure is applied to a gallium nitride HEMT and silicon FinFET. The effectiveness of the modeling procedure in terms of prediction accuracy and generalization capability is demonstrated by validation of the extracted models under operating conditions different than the ones used for the parameters estimation. Good agreement between measurements and model simulations is achieved for both technologies and in both low‐ and high‐frequency range. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:109–116, 2014.     

Cycling reliability of RF-MEMS switches with Gold–Platinum multilayers as contact material

Microsystem Technologies - Contact resistance is the main parameter used for assessing the high cycling reliability of RF microelectromechanical (RF-MEMS) switches. In this paper the use of a...     

FMS for Unmanned Aerial Systems: HMI Issues and New Interface Solutions

To integrate UASs in the NAS, an improvement in navigation, planning, communication and 4D trajectory control capabilities is mandatory. A way to obtain this enhance is to adopt a Flight Management System. A FMS for an UAS has some differences with respect to one for a manned aircraft, in terms of architecture and performed functions. In particular, from HMI point of view, the specific UAS human factor issues shall be added to the current manned FMS interface lacks. Starting from these considerations, a new FMS HMI for the Alenia Aeronautica TCS has been developed, using as data entry devices two touch screens.     

Joint attack detection and secure state estimation of cyber‐physical systems

This paper deals with secure state estimation of cyber‐physical systems subject to switching (on/off) attack signals and injection of fake packets (via either packet substitution or insertion of extra packets). The random set paradigm is adopted in order to model, via random finite sets (RFSs), the switching nature of both system attacks and the injection of fake measurements. The problem of detecting an attack on the system and jointly estimating its state, possibly in the presence of fake measurements, is then formulated and solved in the Bayesian framework for systems with and without direct feedthrough of the attack input to the output. This leads to the analytical derivation of a hybrid Bernoulli filter (HBF) that updates in real time the joint posterior density of a Bernoulli attack RFS and of the state vector. A closed‐form Gaussian mixture implementation of the proposed HBF is fully derived in the case of invertible direct feedthrough. Finally, the effectiveness of the developed tools for joint attack detection and secure state estimation is tested on two case studies concerning a benchmark system for unknown input estimation and a standard IEEE power network application.     

Introducing QoS awareness in distributed programming: QTcl

A number of distributed applications require communication services with quality of service (QoS) guarantees. Building global‐scale distributed systems with predictable properties is one of the great challenges for computer systems engineering in the new century. Work undertaken within the Internet Engineering Task Force has led to the definition of novel architectural models for the Internet with QoS support. According to these models, the network has to be appropriately configured in order to provide applications with the required performance guarantees. In next‐generation networks, enabling applications to interact with the underlying QoS services is of primary importance. Hence, several special‐purpose application programming interfaces (APIs) have been defined to let applications negotiate QoS parameters across QoS‐capable networks. However, so far, none of these APIs are available in different operating environments. We believe that such features should be embedded in programming environments for distributed applications. In this work we present how we included QoS control features in Tcl, a programming language that has been widely adopted for the development of distributed multimedia applications. Our work has led to the implementation of QTcl, an extended Tcl interpreter that provides programmers with a new set of primitives, in full compliance with the standard SCRAPI programming interface for the RSVP protocol. QTcl in highly portable, in that it enables standard QoS negotiation to be performed in a seamless fashion on the most common operating systems. Copyright © 2003 John Wiley & Sons, Ltd.     

Integration of XML Schemas at various “severity” levels

This paper presents a novel approach for the integration of a set of eXtensible Markup Language (XML) Schemas. The proposed approach is specialized for XML, almost automatic, semantic and “light”. Further, an original peculiarity is that it is parametric w.r.t. a “severity” level against which the integration task is performed. The paper describes the approach in all details, illustrates various theoretical results, presents the experiments we have performed for testing it and, finally, compares it with various related approaches already proposed in the literature.