Straightforward modeling of dynamic I–V characteristics for microwave FETs

This work presents a straightforward approach aimed at modeling the dynamic I–V characteristics of microwave active solid‐state devices. The drain‐source current generator represents the most significant source of nonlinearity in a transistor and, therefore, its correct modeling is fundamental to predict accurately the current and voltage waveforms under large‐signal operation. The proposed approach relies on using a small set of low‐frequency time‐domain waveform measurements combined with numerical optimization‐based estimation of the nonlinear model parameters. The procedure is applied to a gallium nitride HEMT and silicon FinFET. The effectiveness of the modeling procedure in terms of prediction accuracy and generalization capability is demonstrated by validation of the extracted models under operating conditions different than the ones used for the parameters estimation. Good agreement between measurements and model simulations is achieved for both technologies and in both low‐ and high‐frequency range. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:109–116, 2014.     

Assessment of weld line performance of PP/Talc moldings produced in hot runner injection molds

Weld lines are weak regions in thermoplastic injection moldings caused by low molecular entanglement and unfavorable orientation. Their occurrence may lead to a significantly reduced mechanical performance of the products. Therefore, when weld lines are likely to occur in molded products, they must be taken into account during the mechanical and technological design processes. The weld lines become more critical when particulate fillers are compounded with the polymer. The performance of weld lines in talc‐filled polypropylene box moldings produced with a double‐gated hot runner mold is assessed in this work. The processing conditions were varied in order to cause morphology and tensile‐impact resistance changes. The weld performance at room temperature was assessed in terms of the energy absorbed in the impact tests. It was found that the performance depends on the injection temperature, the injection rate, and the orientation of the talc particles in the weld‐line plane. J. VINYL ADDIT. TECHNOL., 13:159–165, 2007. © 2007 Society of Plastics Engineers     

Ceramic Microtubes from Preceramic Polymers

A novel process for the production of ceramic microtubes involving the microextrusion of preceramic polymers was studied. Microtubes with a wide range of inner and outer diameters and several centimeters long were produced from two silicone resins. A coextrusion approach was also used to extend the forming capability of the technique. The addition of carbon black resulted in electrically conductive silicon oxycarbide (SiOC) ceramic microtubes. SiOC microtubes possessed a high bending strength, ranging from ∼30–1100 MPa.     

Traffic analysis of peer-to-peer IPTV communities

The Internet is currently experiencing one of the most important challenges in terms of content distribution since its first uses as a medium for content delivery: users from passive downloaders and browsers are moving towards content producers and publishers. They often distribute and retrieve multimedia contents establishing network communities. This is the case of peer-to-peer IPTV communities.In this work we present a detailed study of P2P IPTV traffic, providing useful insights on both transport- and packet-level properties as well as on the behavior of the peers inside the network. In particular, we provide novel results on the (i) ports and protocols used; (ii) differences between signaling and video traffic; (iii) behavior of the traffic at different time scales; (iv) differences between TCP and UDP traffic; (v) traffic generated and received by peers; (vi) peers neighborhood and session duration. The knowledge gained thanks to this analysis is useful for several tasks, e.g. traffic identification, understanding the performance of different P2P IPTV technologies and the impact of such traffic on network nodes and links, and building more realistic models for simulations.¹     

Fibroblast protein profile analysis highlights the role of oxidative stress and vitamin K recycling in the pathogenesis of pseudoxanthoma elasticum

Pseudoxanthoma elasticum (PXE) is a genetic disorder associated to mutations in the ABCC6 gene; however, the pathogenetic mechanisms leading to elastic fibre calcifications and to clinical manifestations are still unknown. Dermal fibroblasts, directly involved in the production of the extracellular milieu, have been isolated from healthy subjects and from patients affected by PXE, cultured in vitro and characterized for their ability to produce reactive oxygen species, for structural and functional properties of their cell membranes, for changes in their protein profile. Data demonstrate that oxidative stress has profound and endurable consequences on PXE fibroblast phenotype being responsible for: reduced levels of global DNA methylation, increased amount of carbonylated proteins and of lipid peroxidation products, altered structural properties of cell membranes, modified protein expression. Data shed new light on the pathogenetic pathways in PXE, by identifying a network of proteins affecting elastic fibre calcification through inefficient vitamin K recycling, and highlight the role of differentially expressed proteins as targets for validating the efficacy of future therapeutic strategies aiming to delay and/or revert the pathologic phenotype of PXE fibroblasts. Moreover, data open new perspectives for investigating PXE-like phenotypes in the absence of ABCC6 mutations.     

Temporal intensity noise characteristics and discrete numeric accuracy of analog liquid-crystal-based spatial light modulators

We investigate the temporal intensity noise characteristics of analog liquid-crystal-based spatial light modulators and how they affect the device's achievable discrete numeric accuracies in an optical computing system. First we present an analytical development that defines the concept of precision in analog computing systems, then we define a noise metric and a precision-optimal quantizer for determining the discrete numeric characteristics of the devices. Second we present an experimental discussion in which a low-noise test facility constructed for this investigation is described, and the noise characteristics of three commercially available liquid-crystal-based modulators are measured and analyzed. The accuracy implications of this measured noise are then discussed within the context of the analytical model for each modulator.     

Black‐box position and attitude tracking for underwater vehicles by second‐order sliding‐mode technique

In this work we address the tracking control problems for autonomous underwater vehicles (AUVs). The proposed solution is based on the variable structure systems (VSS) theory and, in particular, on the second‐order sliding‐mode (2‐SM) methodology. The tuning of the controller is carried out via black‐box approach, dispensing with the knowledge of the actual AUV parameters, by simply progressively increasing a single gain parameter. The presented stability analysis includes explicitly the unmodelled actuator dynamics and the presence of external uncertain disturbances. The good performance of the proposed scheme is verified by means of simulations on a 6‐DOF AUV. Copyright © 2009 John Wiley & Sons, Ltd.     

Understanding user requirements and preferences for a digital library Web portal

This article reports the findings of a user study conducted in the context of the TELplus project to gain insights about user needs and preferences for the digital library services offered by The European Library Web portal. The user requirements collection for the Web portal was designed by adopting a comprehensive survey approach. This combined explicit user feedback with implicit usage data so as to provide a more in-depth analysis of user experience with the portal. The analysis conducted shed light on likely motivations for both participant usage and reluctance to use the services provided, leading to more informed decisions on how to refine, improve, and present Web portal services to their future users. The lessons learnt from this case study also contributed to the development of an integrated methodological framework which provided insights for the future design and evaluation of digital library Web portals and services.     

A Survey of Airworthiness and Certification for UAS

The Italian SMAT project is a civilian program supported by Piemonte Region developed for the territorial monitoring and surveillance and for the prevention of natural hazards. In a different way from the previous surveillance programs, the SMAT project is based on the use of several unmanned platforms that are able to cooperate through ground coordination and control station. The flight in non-segregated airspace, needed in order to accomplish the territorial monitoring mission, is a main issue to be investigated and defined, because of the current lack of a common consensus and agreement on the regulations of UAS. The present work outlines the international initiatives that deal with the development of the regulatory framework on airworthiness and certification of UAS and their potential impact on the SMAT project.