Investigation on the non‐quasi‐static effect implementation for millimeter‐wave FET models

The present article analyzes in detail different intrinsic small‐signal models for transistors. Particular attention is devoted to the non‐quasi‐static effects, which play a crucial role at microwave and millimeter‐wave frequencies. The advantages and disadvantages of these different equivalent circuit topologies are analyzed from both theoretical and experimental standpoints. This study clearly proves that best choice among these model representations depends on the specific device technology besides the investigated frequency range. © 2009 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

Web accessibility guideline aggregation for older users and its validation

Web site-evaluation methodologies and validation engines take the view that all accessibility guidelines must be met to gain compliance. Problems exist in this regard, as contradictions within the rule set may arise, and the type of impairment or its severity is not isolated. The Barrier Walkthrough (BW) method goes someway to addressing these issues, by enabling barrier types derived from guidelines to be applied to different user categories such as motor or visual impairment, etc. However, the problem remains of combinatorial explosion of possibilities when one has to consider users with multiple disabilities. In this paper, a simple set theory operation is used to create a validation scheme for older users by aggregating barrier types specific to motor impaired and low-vision users, thereby creating a new “older users” category from the results of this set union. To evaluate the feasibility and validity of this aggregation approach, two BW experiments were conducted. The first experiment evaluated the aggregated results by focusing on quality attributes and showed that aggregation generates data whose quality is comparable to the original one. However, this first experiment could not test for validity, as the older users category was not included. To remedy this deficiency, another BW experiment was conducted with expert judges who evaluated a web page in the context of older users. In this second experiment, it was found that there is no significant difference between the aggregated and the manually evaluated (by experts) barrier scores, and that the same barriers are identified using experts and aggregation, even though there are differences in how severity scores are distributed. From these results, it is concluded that the aggregation of barriers is a viable alternative to expert evaluation, when the target of that aggregation could not be evaluated manually or it would not be feasible to do so. It is also argued that aggregation is a technique that can be used in combination with other evaluation methods, like user testing or subjective assessments.     

One and the same pathogenetic process for cognitive therapy and experiential dynamic therapy?

Cognitive therapy and experiential dynamic therapy show quite many similarities but they diverge in their initial approach to the patient (aiming respectively at cognitions and at emotions) and in their assumptions about core pathogenetic processes. According to cognitive therapy patients suffer because of a negative unrealistic inner representation of self and world, whereas for experiential dynamic therapy problems arise from conflictual experience and expression of healthy feelings and needs. A synthetic model of the pathogenetic core process, embracing both a conflict about healthy needs and emotions, and a negative self-image, is outlined and discussed. In particular, the model's congruence with new knowledge emerging from infant and attachment research, emotion theory, and cognitive neurosciences is illustrated. Assuming an identity of their basic pathogenetic theory, the two therapies can be thought of as two initially different approaches, the one focusing more on cognitions, the other on emotions, but converging toward the change of a common pathogenetic core. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Improved Thermoelectric Properties in Ga2Te3-GaSb Vacancy Compounds

Thermoelectric materials with high figure of merit, which requires large Seebeck coefficient, large electrical conductivity, and low thermal conductivity, are of great importance in solid-state cooling and power generation. Solid-solution formation is one effective method to achieve low thermal conductivity by phonon scattering due to mass and strain field fluctuations. This type of scattering is maximized in structures containing vacancies. The thermoelectric properties of Ga₂Te₃-GaSb vacancy compounds were studied in this work. We find that the lattice thermal conductivity is reduced by over an order of magnitude with the addition of only very moderate amounts of Ga₂Te₃. Additionally, both the carrier type and concentration can be modified. While the vacancy structure induced by Ga₂Te₃ addition to GaSb can effectively reduce phonon conductivity, carrier mobility is also degraded, and optimized thermoelectric properties require careful control of the vacancy content in these solid solutions.     

A GC-EI-MS/MS Method for the Determination of 15 Polybrominated Diphenyl Ethers (PBDEs) in Fish and Shellfish Tissues

This paper describes the development and validation of an analytical method to determine 15 polybrominated diphenyl ethers (PBDEs) in fish and shellfish tissues with gas chromatography coupled to triple quadrupole mass spectrometry using electron impact source (GC-EI-MS/MS). A QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe)-like procedure was applied; the extract was cleaned up on an acidic Extrelut-NT3 column connected on top of a silica cartridge and further purified with gel permeation chromatography (GPC). The SIM acquisition proved to yield better results than traditional MRM approach for octa-, nona-, and deca-brominated congeners. The validation study was carried out in inter-laboratory conditions. The average recoveries were in the range 66–118%, with relative standard deviations generally lower than or equal to 22%. Quality assurance and quality control practices were thoroughly described and highlighted. These long and tedious practices are fundamental to obtain reliable quantitative data during food monitoring programs and, therefore, to support daily intake assessments. Finally, the procedure was applied to the analysis of marine fish samples collected in local markets. Mackerel and mullet were the most contaminated species.     

Design and characterization of a current sensing platform for silicon-based nanopores with integrated tunneling nanoelectrodes

Solid-state nanopores have been gaining popularity in nano-biotechnology for single molecule detection, in particular for label-free high-throughput DNA sequencing. In order to address the improvement of the resolution/speed trade-off critical in this application, here we present a new two-channel current amplifier tailored for solid-state nanopore devices with integrated tunneling electrodes. The simultaneous detection of ion and tunneling currents provides enhanced molecule tracking capability. We describe the system design starting from a detailed noise analysis and device modeling, highlighting the detrimental role of the conductive silicon substrate and of all the stray capacitive couplings between the electrodes. Given the high input capacitance (0.1–1 nF), the input voltage noise has been carefully minimized choosing a discrete couple of matched low-noise JFETs as input stage, thus achieving an equivalent input noise of 1.5 nV/√Hz (corresponding to a current noise floor of 15 fA/√Hz at 10 kHz). Low-noise performance (11 pA rms noise integrated over a 75 kHz bandwidth) is preserved at a wide bandwidth (300 kHz) and high gain (100 MΩ) thanks to the adoption of an improved integrator/differentiator cascade topology. Furthermore, along with biasing networks and selectable low-pass filters, an AC-coupled channel providing additional gain has been introduced in order to “zoom” in the current signature during pore blockade events. Together with an experimental characterization of the system (and comparison with the noise performance of other instruments), the platform is validated by demonstrating the detection of λ-DNA with 20 nm pores.     

On measuring the accuracy of SLAM algorithms

In this paper, we address the problem of creating an objective benchmark for evaluating SLAM approaches. We propose a framework for analyzing the results of a SLAM approach based on a metric for measuring the error of the corrected trajectory. This metric uses only relative relations between poses and does not rely on a global reference frame. This overcomes serious shortcomings of approaches using a global reference frame to compute the error. Our method furthermore allows us to compare SLAM approaches that use different estimation techniques or different sensor modalities since all computations are made based on the corrected trajectory of the robot. We provide sets of relative relations needed to compute our metric for an extensive set of datasets frequently used in the robotics community. The relations have been obtained by manually matching laser-range observations to avoid the errors caused by matching algorithms. Our benchmark framework allows the user to easily analyze and objectively compare different SLAM approaches.     

Synthesis of Indole Derivatives from 2-Alkynylanilines by Means of Gold Catalysis

The peculiar features of gold(III) and gold(I) species include exceptional carbophilicity and, at the same time, lone pair affinity. Such a combination offers many advantages for the development of more sustainable approaches to the synthesis of indole derivatives from readily available 2-alkynylanilines. This mini-review critically summarizes the literature reports in this field, with the aim to encourage further research activities in this promising area.