Reactive Compatibilizer Precursors for LDPE/PA6 Blends, 4

Summary: The effectiveness of some thermoplastic elastomers grafted with maleic anhydride (MA) or with glycidyl methacrylate (GMA) as compatibilizer precursors (CPs) for blends of low density polyethylene (LDPE) with polyamide‐6 (PA) has been studied. The CPs were produced by grafting different amounts of MA or GMA onto a styrene‐block‐(ethylene‐co‐1‐butene)‐block‐styrene copolymer (SEBS) (KRATON G 1652), either in the melt or in solution. A commercially available SEBS‐g‐MA copolymer with 1.7 wt.‐% MA (KRATON FG 1901X) was also used. The effect of the MA concentration and of other characteristics of the SEBS‐g‐MA CPs was also studied. The specific interactions between the CPs and the blends components were investigated through characterizations of the binary LDPE/CP and PA/CP blends, in the whole composition range. It was demonstrated that the SEBS‐g‐GMA copolymers display poor compatibilizing effectiveness due to cross‐linking resulting from reactions of the epoxy rings of these CPs with both the amine and the carboxyl end groups of PA. On the contrary, the compatibilizing efficiency of the MA‐grafted elastomers, as revealed by the thermal properties and the morphology of the compatibilized blends, was shown to be excellent. The results of this study confirm that the anhydride functional groups possess considerably higher efficiency, for the reactive compatibilization of LDPE/PA blends, than those of the ethylene‐acrylic acid and ethylene‐glycidyl methacrylate copolymers investigated in previous works.

SEM micrograph of the 75/25 LD08/PA blend (with 2 phr SEBSMA1).     

Toward the discovery of novel anti-HIV drugs. Second-generation inhibitors of the cellular ATPase DDX3 with improved anti-HIV activity: synthesis, structure-activity relationship analysis, cytotoxicity studies, and target validation

A hit optimization protocol applied to the first nonnucleoside inhibitor of the ATPase activity of human DEAD-box RNA helicase DDX3 led to the design and synthesis of second-generation rhodanine derivatives with better inhibitory activity toward cellular DDX3 and HIV-1 replication. Additional DDX3 inhibitors were identified among triazine compounds. Biological data were rationalized in terms of structure-activity relationships and docking simulations. Antiviral activity and cytotoxicity of selected DDX3 inhibitors are reported and discussed. A thorough analysis confirmed human DDX3 as a valid anti-HIV target. The compounds described herein represent a significant advance in the pursuit of novel drugs that target HIV-1 host cofactors.     

Modeling the Interaction between Dendrimers and Nucleic Acids: a Molecular Perspective through Hierarchical Scales

Cationic dendrimers are promising nanocarriers for gene delivery thanks to their ability to establish strong interactions with oppositely charged strands of DNA and siRNA and to promote their aggregation. The binding between dendrimers and nucleic acids is typically a complex process that involves various types of interactions at different scales. To design efficient dendrimer candidates for DNA and siRNA binding it is necessary to have a detailed understanding of their interactions with oligonucleotides in the solvent. Molecular simulation can support experimental work, providing a privileged point of view on the aggregation process. This Minireview discusses recent computational efforts to unravel dendrimer–oligonucleotide binding, and proposes a perspective of the multiscale aggregation process based on hierarchy and on the transformations of the interacting “molecular units” following intermolecular interactions.     

Discordance Rate of HER2 Status in Primary Gastric Carcinomas and Synchronous Lymph Node Metastases: A Multicenter Retrospective Analysis

Background: The assessment of human epidermal growth factor receptor 2 (HER2) gene amplification is essential in order to identify those patients affected by advanced gastric cancer who may benefit from Trastuzumab targeted therapy. Materials and Methods: With the aim to investigate the concordance rate in HER2 status between primary gastric carcinoma (GC) and synchronous lymphnode metastases, we investigated HER2 status in a cohort of 108 surgical formalin-fixed paraffin-embedded specimens of GC and matched synchronous metastatic lymph nodes collected from three different units of Anatomic Pathology in southern of Italy. Fleiss-Cohen weighted k statistics were used to assess the concordance rate of HER2 status. Results: HER2 amplification was observed in 17% of primary GCs and the overall concordance rate with corresponding nodal metastases was 90.74%. Changes in HER2 status between primary GC and matched synchronous metastases were evidenced in 10 (9.26%) cases. Of these, 6 cases were HER2 amplified in the primary GC and not amplified in the metastases, while 4 were HER2 not amplified in the primary tumour and amplified in the lymph node metastases. Conclusions: Although at present the simultaneous determination of HER2 in advanced gastric cancer and corresponding metastatic lymph nodes is not mandatory, the possibility that the synchronous metastases of GC have a different HER2 status from that of the primary tumour is of remarkable significance; Indeed this may have influence on the therapeutic management and prognosis of the patients.     

Potent,Metabolically Stable 2‐Alkyl‐8‐(2H‐1,2,3‐triazol‐2‐yl)‐9H‐adenines as Adenosine A2A Receptor Ligands

Inhibition of adenosine A_2A receptors has been shown to elicit a therapeutic response in preclinical animal models of Parkinson’s disease (PD). We previously identified the triazolo‐9H‐purine, ST1535, as a potent A_2AR antagonist. Studies revealed that ST1535 is extensively hydroxylated at the ω‐1 position of the butyl side chain. Here, we describe the synthesis and evaluation of derivatives in which the ω‐1 position has been substituted (F, Me, OH) in order to block metabolism. The stability of the compounds was evaluated in human liver microsomes (HLM), and the affinity for A_2AR was determined. Two compounds, (2‐(3,3‐dimethylbutyl)‐9‐methyl‐8‐(2H‐1,2,3‐triazol‐2‐yl)‐9H‐purin‐6‐amine ( 3 b ) and 4‐(6‐amino‐9‐methyl‐8‐(2H‐1,2,3‐triazol‐2‐yl)‐9H‐purin‐2‐yl)‐2‐methylbutan‐2‐ol ( 3 c ), exhibited good affinity against A_2AR (K_i=0.4 nM and 2 nM , respectively) and high in vitro metabolic stability (89.5 % and 95.3 % recovery, respectively, after incubation with HLM for two hours).     

Oncogenic MicroRNAs Characterization in Clear Cell Renal Cell Carcinoma

A key challenge for the improvement of clear cell renal cell carcinoma (ccRCC) management could derive from a deeper characterization of the biology of these neoplasms that could greatly improve the diagnosis, prognosis and treatment choice. The aim of this study was to identify specific miRNAs that are deregulated in tumor vs. normal kidney tissues and that could impact on the biology of ccRCC. To this end we selected four miRNAs (miR-21-5p, miR-210-3p, miR-185-5p and miR-221-3p) and their expression has been evaluated in a retrospective cohort of formalin-fixed paraffin-embedded (FFPE) tissues from 20 ccRCC patients who underwent surgical nephrectomy resection. miR-21-5p and miR-210-3p resulted the most significantly up-regulated miRNAs in this patient cohort, highlighting these onco-miRNAs as possible relevant players involved in ccRCC tumorigenesis. Thus, this study reports the identification of specific oncogenic miRNAs that are altered in ccRCC tissues and suggests that they might be useful biomarkers in ccRCC management.     

Hydrogen Production by the Thermophilic Bacterium Thermotoga neapolitana

As the only fuel that is not chemically bound to carbon, hydrogen has gained interest as an energy carrier to face the current environmental issues of greenhouse gas emissions and to substitute the depleting non-renewable reserves. In the last years, there has been a significant increase in the number of publications about the bacterium Thermotoga neapolitana that is responsible for production yields of H₂ that are among the highest achievements reported in the literature. Here we present an extensive overview of the most recent studies on this hyperthermophilic bacterium together with a critical discussion of the potential of fermentative production by this bacterium. The review article is organized into sections focused on biochemical, microbiological and technical issues, including the effect of substrate, reactor type, gas sparging, temperature, pH, hydraulic retention time and organic loading parameters on rate and yield of gas production.     

Gas chromatographic study on high-temperature thermal degradation products of methyl linoleate hydroperoxides

Chromatographic techniques were used to separate secondary products generated by thermal degradation of methyl linoleate hydroperoxides (MLHP). The MLHP were obtained by oxidation, selected, and concentrated by solid-phase extraction (SPE) and thin-layer chromatography (TLC). The purified MLHP were then thermo-degraded in the gas-chromatographic glass liner and analyzed on-line by gas chromatography-mass spectrometry (GC-MS). The MLHP were also thermodegraded and collected in a short silicic acid-packed column, eluted, separated by TLC, and then analyzed by GC. By considering the elution in TLC, the GC retention times and the GC-MS analyses, it was possible to characterize the mono- and the dioxygenated secondary products, particularly those having a boiling point higher than methyl linoleate. The peaks that corresponded to the mono-oxygenated products (epoxy, hydroxy, and keto) were identified, and, on the basis of their MS spectra, molecular structures were proposed. A specific elution order was suggested for keto derivatives: 9-keto,Δ^10,12- and 13-keto,Δ^9,11-octadecadienoate. The hydroxy derivatives, which show the typical fragmentations of 9-hydroxy,Δ^10,12- and 13-hydroxy,Δ^9,11-octadecadienoate, were also identified. On the other hand, identification of the di-oxygenated compounds was more difficult, and, therefore, it was not possible to indicate each positional isomer; however, their elution order could be epoxy-hydroxy and epoxy-keto derivatives.     

Effects of fiber orientation on strain concentrations in glass reinforced polyamides

Orientation of reinforcement fibers in injection molded parts is a key factor in determining their strength and stiffness: therefore stress-strain analyses based on isotropic material models produce only rough results. We present a flow/strain analysis methodology that accounts for the actual anisotropic material properties and fiber orientation. Material properties are determined by experiment, fiber orientation is inferred from flow simulation results (velocity vectors). Stress/strain fields are calculated by means of finite element analysis. Results show that for notched parts molded from short glass reinforced polyamide resin, there is a significant dependence of the strain concentration on the local fiber orientation resulting from different injection molding conditions.