High‐capacity resource sharing schemes for broadband wireless networks

The unique capabilities of new cellular systems are expected to provide users with integrated multimedia services. Since the air interface still represents the system bottleneck, this paper proposes novel scheduling techniques to integrate efficiently the support of real‐time traffic (i.e. voice and video) and data bursty traffic under quality of service (QoS) guarantees. Prioritization among traffic classes is adopted and a polling service discipline is employed within a class, where the permission rights of each traffic source are determined on the basis of token bucket regulators. Two polling‐based approaches are compared to serve the sources of a class: (i) when a source is enabled to transmit, a burst of packets is sent at once; (ii) within the time interval destined to a traffic class, a cyclic service of the sources is allowed on a packet basis. With realistic assumptions on both radio channel conditions and protocol signaling overhead, this paper compares these two different approaches and the dynamic slot assignment++ (DSA++) scheme appeared in the literature. The obtained results highlight that our second scheme (case ii) allows increasing the number of supported video traffic sources of many units with respect to DSA++. Finally, an analytical approach has been proposed for our second polling scheme. Copyright © 2004 John Wiley & Sons, Ltd.     

Gas Sensing of NiO‐SCCNT Core–Shell Heterostructures: Optimization by Radial Modulation of the Hole‐Accumulation Layer

Hierarchical core–shell (C–S) heterostructures composed of a NiO shell deposited onto stacked‐cup carbon nanotubes (SCCNTs) are synthesized by atomic layer deposition (ALD). A film of NiO particles (0.80–21.8 nm in thickness) is uniformly deposited onto the inner and outer walls of the SCCNTs. The electrical resistance of the samples is found to increase of many orders of magnitude with the increasing of the NiO thickness. The response of NiO–SCCNT sensors toward low concentrations of acetone and ethanol at 200 °C is studied. The sensing mechanism is based on the modulation of the hole‐accumulation region in the NiO shell layer upon chemisorption of the reducing gas molecules. The electrical conduction mechanism is further studied by the incorporation of an Al₂O₃ dielectric layer at NiO and SCCNT interfaces. The investigations on NiO–Al₂O₃–SCCNT, Al₂O₃–SCCNT, and NiO–SCCNT coaxial heterostructures reveal that the sensing mechanism is strictly related to the NiO shell layer. The remarkable performance of the NiO–SCCNT sensors toward acetone and ethanol benefits from the conformal coating by ALD, large surface area of the SCCNTs, and the optimized p‐NiO shell layer thickness followed by the radial modulation of the space‐charge region.     

Design of Engineered Elastomeric Substrate for Stretchable Active Devices and Sensors

In the field of flexible electronics, emerging applications require biocompatible and unobtrusive devices, which can withstand different modes of mechanical deformation and achieve low complexity in the fabrication process. Here, the fabrication of a mesa‐shaped elastomeric substrate, supporting thin‐film transistors (TFTs) and logic circuits (inverters), is reported. High‐relief structures are designed to minimize the strain experienced by the electronics, which are fabricated directly on the pillars' surface. In this design configuration, devices based on amorphous indium‐gallium‐zinc‐oxide can withstand different modes of deformation. Bending, stretching, and twisting experiments up to 6 mm radius, 20% uniaxial strain, and 180° global twisting, respectively, are performed to show stable electrical performance of the TFTs. Similarly, a fully integrated digital inverter is tested while stretched up to 20% elongation. As a proof of the versatility of mesa‐shaped geometry, a biocompatible and stretchable sensor for temperature mapping is also realized. Using pectin, which is a temperature‐sensitive material present in plant cells, the response of the sensor shows current modulation from 13 to 28 °C and functionality up to 15% strain. These results demonstrate the performance of highly flexible electronics for a broad variety of applications, including smart skin and health monitoring.     

Capacitance DNA bio-chips improved by new probe immobilization strategies

Label-free DNA detection plays a crucial role in developing point-of-care biochips. Capacitance detection is a promising technology for label-free detection. However, data published in literature often show evident time drift, large standard deviation, scattered data points, and poor reproducibility. To address these problems, mercapto-hexanol or similar alkanethiols are usually considered as blocking agents. The aim of the present paper is to investigate new blocking agents to further improve DNA probe surfaces. Data from AFM, SPR, florescence microscopy, and capacitance measurements are used to investigate new lipoate and ethylene-glycol molecules. The new surfaces offer further improvements in terms of diminished detection errors. Film structures are investigated at the nano-scale to justify the detection improvements in terms of probe surface quality. This study demonstrates the superiority of lipoate and ethylene-glycol molecules as blocking candidates when immobilizing molecular probes onto spot surfaces in label-free DNA biochip.     

Top down fabrication of long silicon nanowire devices by means of lateral oxidation

The process for the fabrication of devices based on a single silicon nanowire with a triangular section is presented and discussed. The top down fabrication process exploits the properties of silicon anisotropic etching for the realization of very regular trapezoidal structures, that can be uniformly reduced in controlled way by means of lateral oxidation. This allows the reproducible realization of nanowires smaller than 20 nm, and with a length of several micrometers, starting from relatively big structures that, even if electron beam lithography has been used in the present work, could be realized also by other (as optical) lithographic techniques. Nanowires are already placed between silicon contacts for electrical transport characterization. The process, compatible with the actual MOS technology, is suitable for a massive, large-scale production of silicon nanowire based devices and it allows a flexible platform for multigate and more complex structures and devices. The nanowire triangular section is a step toward the integration of three-dimensional devices. Electrical characteristics of silicon nanowire FETs, both p- and n-doped, will be reported and discussed.     

Shallow and Undoped Germanium Quantum Wells: A Playground for Spin and Hybrid Quantum Technology

Buried‐channel semiconductor heterostructures are an archetype material platform for the fabrication of gated semiconductor quantum devices. Sharp confinement potential is obtained by positioning the channel near the surface; however, nearby surface states degrade the electrical properties of the starting material. Here, a 2D hole gas of high mobility (5 × 10⁵ cm² V^?1 s^?1) is demonstrated in a very shallow strained germanium (Ge) channel, which is located only 22 nm below the surface. The top‐gate of a dopant‐less field effect transistor controls the channel carrier density confined in an undoped Ge/SiGe heterostructure with reduced background contamination, sharp interfaces, and high uniformity. The high mobility leads to mean free paths ≈ 6 µm, setting new benchmarks for holes in shallow field effect transistors. The high mobility, along with a percolation density of 1.2 × 10¹¹cm^?2, light effective mass (0.09m_e), and high effective g‐factor (up to 9.2) highlight the potential of undoped Ge/SiGe as a low‐disorder material platform for hybrid quantum technologies.     

Phase-Sensitive Reflective Imaging Device in the mm-wave and Terahertz Regions

Two Free Electron Laser sources have been developed at ENEA-Frascati for a variety of applications: A Compact Free Electron Laser (C-FEL) that provides coherent radiation in the frequency range between 90 and 150 GHz Gallerano et al. (Infrared Phys. and Techn. 40:161, 1999), and a second source, FEL-CATS, which utilizes a peculiar radio-frequency structure to generate coherent emission in the range 0.4 to 0.7 THz Doria et al. (Phys. Rev. Lett 93:264801, 2004). The high peak power of several kW in 15 to 50 ps pulses, makes these sources particularly suitable for the assessment of exposure limits in biological systems and for long range detection. In this paper we present a phase-sensitive reflective imaging device in the mm-wave and THz regions, which has proven to be a valuable tool in the biological Ramundo-Orlando et al. (Bioelectromagnetics 28:587–598, 2007), environmental Doria et al. (2005) and art conservation fields Gallerano et al. (2008). Different setups have been tested at different levels of spatial resolution to image objects from a few centimeter square to larger sizes. Images have been compared to identify and characterize the contrast mechanism.     

CMOS-Compatible Room-Temperature Rectifier Toward Terahertz Radiation Detection

In this paper, we present a new rectifying device, compatible with the technology of CMOS image sensors, suitable for implementing a direct-conversion detector operating at room temperature for operation at up to terahertz frequencies. The rectifying device can be obtained by introducing some simple modifications of the charge-storage well in conventional CMOS integrated circuits, making the proposed solution easy to integrate with the existing imaging systems. The rectifying device is combined with the different elements of the detector, composed of a 3D high-performance antenna and a charge-storage well. In particular, its position just below the edge of the 3D antenna takes maximum advantage of the high electric field concentrated by the antenna itself. In addition, the proposed structure ensures the integrity of the charge-storage well of the detector. In the structure, it is not necessary to use very scaled and costly technological nodes, since the CMOS transistor only provides the necessary integrated readout electronics. On-wafer measurements of RF characteristics of the designed junction are reported and discussed. The overall performances of the entire detector in terms of noise equivalent power (NEP) are evaluated by combining low-frequency measurements of the rectifier with numerical simulations of the 3D antenna and the semiconductor structure at 1 THz, allowing prediction of the achievable NEP.     

Toward Stretchable Self‐Powered Sensors Based on the Thermoelectric Response of PEDOT:PSS/Polyurethane Blends

The development of new flexible and stretchable sensors addresses the demands of upcoming application fields like internet‐of‐things, soft robotics, and health/structure monitoring. However, finding a reliable and robust power source to operate these devices, particularly in off‐the‐grid, maintenance‐free applications, still poses a great challenge. The exploitation of ubiquitous temperature gradients, as the source of energy, can become a practical solution, since the recent discovery of the outstanding thermoelectric properties of a conductive polymer, poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate) (PEDOT:PSS). Unfortunately the use of PEDOT:PSS is currently constrained by its brittleness and limited processability. Herein, PEDOT:PSS is blended with a commercial elastomeric polyurethane (Lycra), to obtain tough and processable self‐standing films. A remarkable strain‐at‐break of ≈700% is achieved for blends with 90 wt% Lycra, after ethylene glycol treatment, without affecting the Seebeck voltage. For the first time the viability of these novel blends as stretchable self‐powered sensors is demonstrated.