Modeling video sources for real-time scheduling

What is the impact of the autocorrelation of variable-bit-rate (VBR) sources on real-time scheduling algorithms? Our results show that the impact of long term, or interframe, autocorrelation is negligible, while the impact of short term, or intraframe, autocorrelation can be significant. Such results are essentially independent of the video coding scheme employed. To derive these results, video sequences are modeled as a collection of stationary subsequences called scenes. Within a scene, a statistical model is derived for both the sequence of frames and of slices. The model captures the distribution and the autocorrelation function of real-time video data. In previous work, the pseudoperiodicity of the slice level auto-correlation function made it difficult to develop a simple yet accurate model. We present a generalization of previous methods that can easily capture this pseudoperiodicity and is suited for modeling a greater variety of autocorrelation functions. By simply tuning a few parameters, the model reproduces the statistic behavior of sources with different types and levels of correlation on both the frame and the slice level.     

包含热模型的大功率MOSFET新型电路模型

功率转换器的功率密度越来越高，发热问题越来越严重，这种功率转换器的设计对现代大功率半导体技术提出了新的挑战；因而，热问题的优化设计和核实变得比大功率器件的电模型更加重要，本文提出一种新的PSPICE模型，可以利用它计算MOSFET芯片在瞬变过程中的温度。其中的热阻可以从制造商提供的产品使用说明书得到。本文介绍的模型提供发热和电气参数之间的动态关系。它建立了与许可的热环境的关系，例如，栅极驱动电路、负载、以及散热器的分析与优化设计。利用这个模型可以改善散热器的设计。由于决定功率损耗的参数是分布在一定范围内，受生产制造的影响很大，因而散热器的设计往往由于无法预先知道功率损耗而无法进行。     

3-D gust effect factor for slender vertical structures

Original studies on gust factor buffeting dealt with the alongwind displacement of structures. Research on this topic carried out since the nineties followed two distinct lines: the first determines the maximum effects due to the alongwind response; the second extends the original method from the alongwind response to crosswind and torsional responses. This paper represents the junction point of these research lines with reference to cantilever slender vertical structures. It derives the most relevant effects associated with the three-dimensional (3-D) wind-excited response of this structural type and shows that a suitable definition of one non-dimensional quantity, referred to as the 3-D gust effect factor, provides such effects at any level through a wide set of experimental, numerical and analytical procedures. A new definition of a 3-D equivalent static force consistent with this method is also introduced and critically compared with previous analogous statements.     

Convolution profiles for right inversion of multivariable non-minimum phase discrete-time systems

The problem of the non-causal inversion of linear multivariable discrete-time systems is analyzed in the geometric approach framework and is solved through the computation of convolution profiles which guarantee perfect tracking under the assumption of infinite-length preaction and postaction time intervals. It is shown how the shape of the convolution profiles is related to both the relative degree and the invariant zeros of the plant. A computational setting for the convolution profiles is derived by means of the standard geometric approach tools. Feasibility constraints are also taken into account. A possible implementation scheme, based on a finite impulse response system acting on a stabilized control loop, is provided.     

Global adaptive output feedback controllers with application to non‐linear friction compensation

In this paper, we consider a class of non‐linear systems in which a set of constant parameters is unknown and some state variables are not available for measurement. For such systems we provide a constructive procedure for the solution of the global adaptive tracking problem with dynamic partial state feedback. We illustrate an application of the control strategy to the adaptive non‐linear friction compensation of a DC motor servomechanism. We improve previous results in tow directions: we allow for a subset of the unmeasurable states to enter in a system non‐linearly; we consider systems which are linearly parametrized with respect to a set of unknown constant parameters. Copyright © 2002 John Wiley & Sons, Ltd.     

Stability analysis of an adaptive packet access scheme for mobile communication systems with high propagation delays

In this paper, we investigate a packet access scheme that is able to support mixed traffics in the presence of high propagation delays. Referring to a Time‐Code Division Multiple Access air interface, we propose a Medium Access Control (MAC) protocol based on a random access scheme. A successful attempt grants the use of a slot‐code resource. This protocol is named Adaptive Time Code‐Packet Reservation Multiple Access (ATC‐PRMA), since the access parameters are changed, depending on the traffic load conditions, so as to fulfil Quality of Service requirements. Numerical examples are carried out for the Low Earth Orbit (LEO)‐Mobile Satellite System (MSS) scenario, but all these considerations could be applied to High‐Altitude Platform Stations (HAPSs) as well. In both cases, high propagation delays prevent an immediate feedback to users. An analytical approach is proposed to study the stability of our MAC scheme. Accordingly, we define a criterion for optimizing system performance. The predicted ATC‐PRMA behaviour is supported by simulation results. Finally, we show the performance improvement of ATC‐PRMA with respect to a MAC protocol not employing adaptive parameters. Copyright © 2003 John Wiley & Sons, Ltd.     

Relation between microstructure, properties and spark plasma sintering (SPS) parameters of pure ultrafine WC powder

A combined experimental/numerical methodology is developed to fully consolidate pure ultrafine WC powder under a current-control mode. Three applied currents, 1900, 2100 and 2700 A, and a constant pressure of 20 MPa were employed as process conditions. The developed spark plasma sintering (SPS) finite-element model includes a moving-mesh technique to account for the contact resistance change due to sintering shrinkage and punch sliding. The effects of the heating rate on the microstructure and hardness were investigated in detail along the sample radius from both experimental and modeling points of view. The maximum hardness (2700 HV10) was achieved for a current of 1900 A at the core sample, while the maximum densification was achieved for 2100 and 2700 A. A direct relationship between the compact microstructure and both the sintering temperature and the heating rate was established.     

On the Use of the Flickermeter to Limit Low-Frequency Interharmonic Voltages

The possibility of using the IEC flickermeter for the assessment of the limits of low frequency interharmonic voltages is critically analyzed. The response of flickermeters to interharmonic components is analytically investigated, obtaining approximation formulas for the calculation of Pst in the presence of couples of components at frequencies that are symmetric with reference to the fundamental and in the presence of one or more single components. The instrument characteristics and limitations are also highlighted, using the results obtained from a numerical implementation of the IEC flickermeter. Finally, the general problem of the limits of low frequency interharmonic voltages is discussed and practical solutions are proposed.     

EGF/EGF-R system and benign breast disease during and following the treatment of gynaecological pathologies with an analogue of LH-RH

Clinical and pathological changes of the mammary gland have been studied in 64 women affected by symptomatic Benign Breast Disease (BBD) coexisting with endometriosis or uterine leiomyomata. These patients were rendered hypoestrogenic by subcutaneous administration of the LH-RH analogue Goserelin depot [D-ser (tBu)6 Aza-Gly10-GnRH (ICI118630)] performed every 28 days, for six months. They were evaluated clinically and ultrasonographically before and after treatment to find possible changes of BBD as well as of endometriosis or uterine leiomyomata. Mammary biopsies were performed before and after treatment in all the patients to study the changes of EGF-R expression. Results showed that clinical improvement is accompanied with a reduction of EGF-R expression.