The report presents an innovative solar barometric distillation technology for seawater desalting (SW-SBD) which has several attractive features such as: (1) efficient vacuum solar collectors of simple construction; (2) a barometric layout for quasi-steady operation at subatmospheric pressure; (3) a demister system of simple mechanical construction; and (4) an electronic control system regulating plant productivity parameters on available solar radiation flux. The proposed seawater desalting technology consists of single-effect distillation with water vapor produced and heated at subatmospheric pressure in a solar collector loop; the basic layout, operational features, and energy efficiency are presented and analysed in detail. Subsequent reports will provide technico-economical data from prototype desalting plants in view of industrial implementation. A promising specific electric energy consumption,∼2 kWm3 offresh water produced, was found by estimating pumping power requirements of major SW-SBD plant pumps. A sizable reduction in produced water cost with respect to an existing solar seawater desalting plant in Abu Dhabi is expected on the basis of a preliminary economic evaluation for a ∼100 m3/d plant prototype. 相似文献
Alumina (Al2O3) coatings of different thickness were deposited on OT59 brass substrate (BS) using the metal organic chemical vapour deposition (MOCVD) technique to evaluate the corrosion performance by EIS measurements. The used precursor was dimethyl-aluminium-isopropoxide. Electrochemical characterizations of the deposited films were performed in a standard very aggressive acidic solution (aerated 1N H2SO4 at 25 °C up to 168 h of immersion time) by means of direct current method (Tafel curves) and electrochemical impedance spectroscopy (EIS). The Rutherford backscattering spectroscopy (RBS) indicated that the films are very pure with the correct Al2O3 stoichiometry, while the IR absorption spectra showed that the films did not contain any OH groups. The surface film morphology was investigated by atomic force microscopy (AFM) and displayed a globular texture. The films were very smooth, with a maximum root mean square roughness, for example, of 14 nm for a 0.96 μm thick coating. The EIS data confirmed, as expected, that a 2.40 μm Al2O3 layer ensures the best corrosion protection after 168 h of immersion in the very acidic environment used. 相似文献
The dynamic-mechanical properties of some fluoroelastomers were determined as a function of composition at low frequency (≈ 1 Hz), by means of a free oscillation torsion pendulum, between −180°C and the softening point. Vinylidenefluoride (VDF)-hexafluoropropene (HFP) copolymers of molar composition 0–39% HFP and terpolymers of VDF and HFP with up to 30mol% tetrafluoroethylene (TFE) and a constant VDF to HFP molar ratio of 3.4 were considered. Two relaxation processes typical of the amorphous phase were found. The first, located at about −87°C, is related to local motions and the transition temperature was found to be independent of composition for copolymers, while it depends on TFE molar content for terpolymers. The second is related to the glass transition and the transition temperature depends on the composition. However, for semicrystalline copolymers the double glass transition phenomenon was observed. When crystallinity goes to zero at about 20 mol% HFP, only one transition is observed. It was also found that ordered structures can take place for terpolymers when TFE molar concentration exceeds 20%. The crystal disorder transition of pure PVDF (75°C) is observed also for low HFP concentrations but the transition temperature is strongly reduced. Analogies between the VDF-HFP and E-P systems are also discussed. 相似文献
Summary: The effectiveness of some thermoplastic elastomers grafted with maleic anhydride (MA) or with glycidyl methacrylate (GMA) as compatibilizer precursors (CPs) for blends of low density polyethylene (LDPE) with polyamide‐6 (PA) has been studied. The CPs were produced by grafting different amounts of MA or GMA onto a styrene‐block‐(ethylene‐co‐1‐butene)‐block‐styrene copolymer (SEBS) (KRATON G 1652), either in the melt or in solution. A commercially available SEBS‐g‐MA copolymer with 1.7 wt.‐% MA (KRATON FG 1901X) was also used. The effect of the MA concentration and of other characteristics of the SEBS‐g‐MA CPs was also studied. The specific interactions between the CPs and the blends components were investigated through characterizations of the binary LDPE/CP and PA/CP blends, in the whole composition range. It was demonstrated that the SEBS‐g‐GMA copolymers display poor compatibilizing effectiveness due to cross‐linking resulting from reactions of the epoxy rings of these CPs with both the amine and the carboxyl end groups of PA. On the contrary, the compatibilizing efficiency of the MA‐grafted elastomers, as revealed by the thermal properties and the morphology of the compatibilized blends, was shown to be excellent. The results of this study confirm that the anhydride functional groups possess considerably higher efficiency, for the reactive compatibilization of LDPE/PA blends, than those of the ethylene‐acrylic acid and ethylene‐glycidyl methacrylate copolymers investigated in previous works.
SEM micrograph of the 75/25 LD08/PA blend (with 2 phr SEBSMA1). 相似文献
Summary: The success of the use of layered silicates in polymer nanocomposites, to improve physical and chemical properties is strictly related to a deeper knowledge of the mechanistic aspects on which the final features are grounded. This work shows the temperature induced structural rearrangements of nanocomposites based on poly[ethylene‐co‐(vinyl acetate)] (EVA) intercalated‐organomodified clay (at 3–30 wt.‐% silicate addition) which occur in the range between 75 and 350 °C. In situ high temperature X‐ray diffraction (HT‐XRD) studies have been performed under both nitrogen and air to monitor the modifications of the nanocomposite structure at increasing temperatures under inert/oxidative atmosphere. Heating between 75 and 225 °C, under nitrogen or air, causes the layered silicate to migrate towards the nanocomposite surface and to increase its interlayer distance. The degradation of both the clay organomodifier and the VA units of the EVA polymer seems to play a key role in driving the evolution of the silicate phase in the low temperature range. The structural modifications of the nanocomposites in the high temperature range (250–350 °C), depended on the atmosphere, either inert or oxidizing, in which the samples were heated. Heating under nitrogen led to deintercalation and thus a decrease of the silicate interlayer space, whereas exfoliation was the main process under air leading to an increase of the silicate interlayer space.
Heat induced structural modification of EVA‐clay nanocomposite under nitrogen and air. 相似文献
Digital cameras, new generation phones, commercial TV sets and, in general, all modern devices for image acquisition and visualization can benefit from algorithms for image enhancement suitable to work in real time and preferably with limited power consumption. Among the various methods described in the scientific literature, Retinex-based approaches are able to provide very good performances, but unfortunately they typically require a high computational effort. In this article, we propose a flexible and effective architecture for the real-time enhancement of video frames, suitable to be implemented in a single FPGA device. The video enhancement algorithm is based on a modified version of the Retinex approach. This method, developed to control the dynamic range of poorly illuminated images while preserving the visual details, has been improved by the adoption of a new model to perform illuminance estimation. The video enhancement parameters are controlled in real time through an embedded microprocessor which makes the system able to modify its behavior according to the characteristics of the input images, and using information about the surrounding light conditions. 相似文献