Bacterial composition of commercial probiotic products as evaluated by PCR-DGGE analysis

The use of Polymerase Chain Reaction-Denaturing Gradient Gel Electrophoresis (PCR-DGGE) technique in identifying the microorganisms present in commercial probiotic yoghurts and lyophilised products was evaluated. Two reference ladders were assembled constituted by PCR-amplified V2-V3 regions of 16S rDNA from bacterial species generally used as probiotics. Identification was achieved comparing the PCR-DGGE patterns obtained from the analysed products with the ladder bands. Bands from members of the same species showed the same migration distance in denaturing gel, hence supporting the identificative value of the method. The validity of the technique was also proven confirming the PCR-DGGE identification results by sequence data analysis and by species-specific PCR. General congruence between microorganisms declared on the label and those revealed by PCR-DGGE was found for probiotic yoghurts. Conversely, some discrepancies were observed for probiotic lyophilised preparations, i.e. the incorrect identification of some Bifidobacterium and Bacillus species and the presence of not declared microorganisms. PCR-DGGE turned out to be an appropriate culture-independent approach for a rapid detection of the predominant species in mixed probiotic cultures.     

Garlic (Allium sativum L.) fed to dairy cows does not modify the cheese-making properties of milk but affects the color,texture, and flavor of ripened cheese

Garlic and garlic components have recently been proposed as ruminal activity modulators to reduce the enteric methane emissions of ruminants, but little is known of their influence on milk coagulation properties, nutrient recovery, cheese yield, and sensorial and rheological characteristics of milk and cheese. The present study assessed the effects of garlic and diallyl sulfide supplements on dry matter intake (DMI), productive performance, milk coagulation properties, cheese yield, milk and cheese sensory profiles, and rheological characteristics. Four dairy cows were fed a total mixed ration either alone (control) or supplemented with 100 or 400 g/d of garlic cloves or 2 g/d of diallyl sulfide in 4 consecutive experimental periods in a 4 × 4 Latin square design. The diallyl sulfide dose was established to provide approximately the same amount of allyl thiosulfinate compounds as 100 g of fresh garlic cloves. The total mixed ration was composed of 0.29 corn silage, 0.23 corn-barley mixture, 0.17 sunflower-soybean mixture, 0.12 alfalfa hay, 0.12 grass hay, 0.04 sugar beet pulp, and 0.02 other additives, and contained 0.253 starch, 0.130 crude protein, and 0.375 neutral detergent fiber, on a dry matter basis. Each experimental period consisted of 7 d of transition and 14 d of treatment. On d 18 and 21 of each period, milk samples (10 L) were collected from each cow for chemical analysis and cheese-making. The organoleptic properties of the milk and 63-d-ripened cheeses were assessed by a panel of 7 trained sensory evaluators. The experimental treatments had no effects on DMI, milk yield, feed efficiency (milk yield/DMI), milk coagulation properties, nutrient recovery, or cheese yield. Garlic-like aroma, taste, and flavor of milk and cheese were significantly influenced by the treatments, particularly the highest dose of garlic cloves, and we found close exponential relationships between milk and cheese for garlic-like aroma (R² = 0.87) and garlic-like flavor (R² = 0.79). Diallyl sulfide and 400 g/d of garlic cloves resulted in lower pH, shear force, and shear work of ripened cheeses compared with the other treatments. Garlic cloves and diallyl sulfide had opposite effects on cheese color indices. We conclude that adding 400 g/d of garlic to the feed of lactating dairy cows highly influences the sensory and rheological characteristics of cheese.     

Development and validation of a quantitative UHPLC-MS/MS method for selected brominated flame retardants in food

An ultra-high performance liquid chromatography – tandem mass spectrometry (UHPLC-MS/MS) method was developed and validated (in-house) for the quantification of selected brominated flame retardants (BFRs), including tetrabromobisphenol A (TBBPA), hexabromocyclododecanes (HBCDs), tetrabromobisphenol S (TBBPS) and bromophenols (BPs), in various food matrices. The sample preparation consisted of extraction of TBBPS with acidified acetonitrile followed by a fast dispersive solid-phase extraction (dSPE) clean-up and extraction of the other BFRs with a mixture of hexane and dichloromethane (1:1, v/v) with subsequent clean-up using acidified silica (44%, w/w). The limits of quantification of the method varied widely for the types of food matrices and the different classes of BFRs from 4 pg g^?1 wet weight (ww) to 8 ng g^?1 ww. For most of the analytes the apparent recovery was in the range 70–120%, and the method precision (under repeatability conditions) was below 20%. The method was successfully applied in proficiency testing exercises as well as for analysis of various food items. Only 25% of the collected food samples contained BFRs, with 4-bromophenol and α-HBCD as the only detected compounds. The contaminated foodstuffs were fish and eggs with concentrations in the range from 48 to 305 pg g^?1 ww.     

Grappa quality from the Chianti and Montepulciano areas (Tuscany,Italy): monitoring the leaching of copper from distillation columns

The main aim of this work was to evaluate the leaching of copper in grappa from distillation plant that treats Cabernet and Sangiovese marcs (Montepulciano and Chianti, Tuscany). Copper content (determined by atomic absorption spectrometry, AAS) was 1.05 ± 0.03 mg L^?1 in industrial distillates (Cabernet marc, 82.3% alcohol, v/v), and 3.7 ± 0.2 μg L^?1 in artificial grappa (62.0%, Cabernet) obtained by distilling marc in a laboratory‐scale glassware plant. The artificial grappa distillate was refluxed over copper shavings, and copper content, C_Cu, was analysed in relation to reflux time and wear of the copper bell. The results showed that C_Cu trend was almost linear with increasing alcohol concentration and constant reflux time, and vice versa. The ratios of selected volatile components were not influenced by reflux on the shavings.     

Effects of aw at packaging time and atmosphere composition on aroma profile,biogenic amine content and microbiological features of dry fermented sausages

The aim was to evaluate the effects of different water contents (corresponding to a_w 0.940, 0.914, 0.895 and 0.875) of sausages at different times on the characteristics of typical Italian dry fermented sausages packaged under two different modified atmospheres (MAP) (100%N₂ or 30%CO₂/70%N₂). During ripening and storage, samples were analyzed to evaluate pH and a_w changes, microbial population, biogenic amine (BA) accumulation and aroma profile.     

Monitoring of a Best Management Practice Wetland before and after Maintenance

The U.S. Environmental Protection Agency’s (USEPA) Urban Watershed Management Branch monitored a best management practice (BMP) wetland in the Richmond Creek (RC) watershed. This BMP, designated Richmond Creek #5 (RC-5), is owned and operated by the New York City Department of Environmental Protection’s as part of the Bluebelt program. During monitoring performed in 2003 and 2004, RC-5 was monitored for several water quality parameters including suspended solids (SS), chemical oxygen demand (COD), and phosphorous. Calculated SS loads demonstrated a 61% removal which is in line with the anticipated removals of 55%–57%, however, COD was not being removed from RC-5. Due to visible accumulation of sediment in the forebay and leaves throughout the BMP, maintenance activity was performed in the spring of 2005, to remove the sediment and organic matter (leaves) by vactor truck and physical labor. About four truck loads of sediment and leaf litter, estimated at 35?m3 (46 cubic yards), was removed from the site. Monitoring during the fall of 2005 measured the effects of this maintenance activity. The effluent concentrations of COD were significantly less and less variable after maintenance, and calculated influent and effluent COD loading indicated removals. The reduction in COD effluent coincided with drops in effluent phosphorous levels. Effluent SS concentrations were not significantly altered, implying RC-5 still had capacity to remove sediments before maintenance occurred. Indications are that the maintenance activity significantly reduced the COD effluent and may help communities manage phosphorous loadings.     

Preparation of recoverable Ru catalysts for liquid-phase oxidation and hydrogenation reactions

We here report the synthesis, characterization and catalytic performance of new supported Ru(III) and Ru(0) catalysts. In contrast to most supported catalysts, these new developed catalysts for oxidation and hydrogenation reactions were prepared using nearly the same synthetic strategy, and are easily recovered by magnetic separation from liquid phase reactions. The catalysts were found to be active in both forms, Ru(III) and Ru(0), for selective oxidation of alcohols and hydrogenation of olefins, respectively. The catalysts operate under mild conditions to activate molecular oxygen or molecular hydrogen to perform clean conversion of selected substrates. Aryl and alkyl alcohols were converted to aldehydes under mild conditions, with negligible metal leaching. If the metal is properly reduced, Ru(0) nanoparticles immobilized on the magnetic support surface are obtained, and the catalyst becomes active for hydrogenation reactions.     

Performance of laser-treated AISI-M2 cutting tools for peeling beech

For many wood machining processes, the interest of tool steels remains very important because of their good tool edge accuracy and easy grinding. The main problem is their low resistance to wearing and corrosion. In order to increase their performance, a laser melting and cladding applied on the tool edges is presented in this paper. Firstly, annealed AISI-M2 bar was melted, and M2 powder was cladded onto the AISI L2 substrate by a laser beam. The microstructure and microhardness of the M2 melted and M2 clad were characterised. Secondly, their wear resistance was tested for peeling beech wood. The experimental results show that metallurgical structure obtained by conventional heat treatment for the M2 was ferritic polycrystalline with coarse primary carbides, and the microstructure of the M2 melted and M2 clad, in which whole primary carbides were completely dissolved during laser melting and cladding, was observed to reveal fine iron dendritic structure. The M2 melted and M2 clad, which were almost the same in microhardness, had larger microhardness compared to the M2 conventional. The wear resistance and wear pattern of the M2 melted and M2 clad cutting tools in peeling beech were better than those of the M2 conventional cutting tool. Also the M2 melted and M2 clad cutting tools produced better surface quality of veneer and retained better cutting edges roughness compared to the M2 conventional.     

Hydroxyapatite-alginate biocomposite promotes bone mineralization in different length scales in vivo

Tissue engineering is a multidisciplinary research area that aims to develop new techniques and/or biomaterials for medical applications. The objective of the present study was to evaluate the osteogenic potential of a composite of hydroxyapatite and alginate in bone defects with critical sizes, surgically made in the calvaria region of rats. The rats (48 adult males), Rattus norvegicus Wistar, were divided into two groups: control (without composite implantation) and experimental (with composite implantation) and analyzed by optical microscopy at the biological time points 15, 45, 90 and 120 d, and transmission electron microscopy 120 d after the implantation of the biomaterial. It was observed that the biomaterial presented a high degree of fragmentation since the first experimental points studied, and that the fragments were surrounded by new bone after the duration of the project. These areas were studied by analytical transmission electron microscopy using an energy dispersive X-ray spectrometer. Three regions could be distinguished: (1) the biomaterial rich in hydroxyapatite; (2) a thin contiguous region containing phosphorus but without calcium; (3) a region of initial ossification containing mineralizing collagen fibrils with a calcium/phosphorus ratio smaller than the particles of the composite. The intermediate region (without calcium or containing very low amounts of calcium), which just surrounded the composite had not been described in the literature yet, and is probably associated specifically to the biocomposite used. The high performance of the biomaterial observed may be related to the fact that alginate molecules form highly anionic complexes and are capable of adsorbing important factors recognized by integrins from osteoblasts. Regions of fibrotic tissue were also observed mainly in the initial experimental points analyzed. However, it did not significantly influence the final result. In conclusion, the biomaterial presents a great potential for application as bone grafts in the clinical area.     

The ion photon emission microscope on SNL’s nuclear microprobe and in LBNL’s cyclotron facility

Radiation effects microscopy (REM) has evolved into an essential tool for the study, diagnostics and remedy of single event effects (SEE) in microelectronics devices, However, we are entering an era where the ion energies of the current systems are becoming inadequate for diagnosing SEE problems in modern ICs due to the great thickness of interlevel dielectric, metallization and passivation layers found on top of the active radiation-sensitive Si. Our solution is the ion photon emission microscope (IPEM), which eliminates the need to focus several GeV heavy ions. A tabletop IPEM is currently in use at Sandia National Laboratories (SNL), operating with alpha particles, and showing 4 μm resolution. We have recently developed a second system, and installed it on one of the SNL nuclear microprobe lines to demonstrate the principle and prove its potential as a portable radiation effects microscope that can be installed at the LBNL GeV cyclotron facility. The microprobe system is currently operating with ～2 μm resolution. The determined advantages of installing a similar system at the LBNL cyclotron facility will be discussed, in addition to recently measured optical characteristics of the various phosphor materials being investigated.