High‐tuning‐range CMOS band‐pass IF filter based on a low‐Q cascaded biquad optimization technique

A design procedure for high‐order continuous‐time intermediate‐frequency band‐pass filters based on the cascade of low‐Q biquadratic cells is presented. The approach is well suited for integrated‐circuit fabrication, as it takes into account the maximum capacitance spread dictated by the available technology and maximum acceptable sensitivity to component variations. A trade‐off between noise and maximum linear range is also met. A novel, wide‐tuning‐range transconductor topology is also described. Based on these results, a 10‐pole band‐pass filter for a code division multiple‐access satellite receiver has been designed and tested. The filter provides tunable center frequency (f₀) from 10 to 70 MHz and exhibits a 28‐MHz bandwidth around f₀ = 70 MHz with more than 39‐dB attenuation at f₀/2 and 2f₀. Third‐order harmonic rejection is higher than 60 dB for a 1‐Vpp 70‐MHz input, and equivalent output noise is lower than 1 mV_rms. The circuit is fabricated in a 0.25‐µm complementary metal oxide semiconductor process, and the core consumes 12 mA from a 2.5‐V supply, offering the best current/pole ratio figure. The die area resulted to be 0.9 × 1.1 mm². Copyright © 2014 John Wiley & Sons, Ltd.     

Platelet lysate and adipose mesenchymal stromal cells on silk fibroin nonwoven mats for wound healing

In this work platelet lysate (PL) and adipose‐derived mesenchymal stromal cells (ASCs) seeded on nonwoven fibroin mats were in vitro and in vivo evaluated for tissue regenerative applications. Nonwoven mats obtained by a large scale water entanglement technique were characterized for their physico‐chemical properties. Results indicated a high purity of fibroin fibers, their stability after sterilization process and appropriate technological properties suitable for tissue engineering. Moreover, the scaffolds in vitro supported adhesion and migration of ASCs and the presence of PL improved the cell proliferation. The products were then applied on epithelial/dermal wounds carried out on the dorsal surface of rabbit: the skin reparative process was solved in 9 days, with a completely restitutio ad integrum of the epithelium in animals treated with PL alone; ASCs did not further improve the wound healing. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42942.     

Co-Expression and Co-Localization of Cartilage Glycoproteins CHI3L1 and Lubricin in Osteoarthritic Cartilage: Morphological,Immunohistochemical and Gene Expression Profiles

Osteoarthritis is the most common human arthritis characterized by degeneration of articular cartilage. Several studies reported that levels of human cartilage glycoprotein chitinase 3-like-1 (CHI3L1) are known as a potential marker for the activation of chondrocytes and the progression of Osteoarthritis (OA), whereas lubricin appears to be chondroprotective. The aim of this study was to investigate the co-expression and co-localization of CHI3L1 and lubricin in normal and osteoarthritic rat articular cartilage to correlate their modified expression to a specific grade of OA. Samples of normal and osteoarthritic rat articular cartilage were analyzed by the Kellgren–Lawrence OA severity scores, the Kraus’ modified Mankin score and the Histopathology Osteoarthritis Research Society International (OARSI) system for histomorphometric evaluations, and through CHI3L1 and lubricin gene expression, immunohistochemistry and double immuno-staining analysis. The immunoexpression and the mRNA levels of lubricin increased in normal cartilage and decreased in OA cartilage (normal vs. OA, p < 0.01). By contrast, the immunoexpression and the mRNA levels of CHI3L1 increased in OA cartilage and decreased in normal cartilage (normal vs. OA, p < 0.01). Our findings are consistent with reports suggesting that these two glycoproteins are functionally associated with the development of OA and in particular with grade 2/3 of OA, suggesting that in the future they could be helpful to stage the severity and progression of the disease.     

Effect of lithium intercalation on the photovoltaic performances of photovoltachromic cells

In the last few years, a new class of smart multifunctional photoelectrochemical devices has been attracting the interest of several academic institutions and industrial companies: photovoltachromic cells, combining the features of photoelectrochromic cells with those of dye‐sensitized solar cells. Here, we report the results of a detailed electrochemical analysis aiming at investigating the electrochemical behavior of these complex photoelectrochemical devices. In particular, we have been focused on the effect of Li⁺ ions displacement during the coloration of the electrochromic tungsten oxide on the performances of the photovoltaic unit. As we had previously observed striking differences between the performances of the barely photovoltaic mode (with the tungsten oxide in the bleached state) and the photovoltachromic mode (with the tungsten oxide in the colored state), we thus attempted to provide a reasonable physical interpretation to the observed phenomena. Copyright © 2013 John Wiley & Sons, Ltd.     

Self-nucleation of isotactic poly(1-butene) in the trigonal modification

Isotactic poly(1-butene) (i-PBu) is a polyolefin of industrial relevance which exhibits an interesting polymorphism. Upon cooling from the relaxed melt at atmospheric pressure, a tetragonal phase (Form II) develops. However, being metastable, this structure slowly evolves upon aging in the stable trigonal modification (Form I). Another trigonal modification, denoted Form I′, can also crystallize directly from the melt if proper conditions are met, e.g., high pressure, low tacticity, ultrathin samples etc. In this work, we aim to verify whether, by acting on the nucleation stage via a proper thermal history, the direct formation of the trigonal polymorph from the melt in a bulk sample is possible. Nucleation of i-PBu has been tailored by means of the self-nucleation technique, imposed on previously aged samples (Form I). DSC and temperature-resolved WAXS show that different crystallization pathways can be observed, depending on the residual concentration of Form I self-nuclei. With decreasing self-nucleation temperature we first encounter “cross-nucleation” of the tetragonal crystal on trigonal nuclei, followed by concomitant crystallization of Form II and Form I′ and eventually the sole formation of the trigonal modification (Form I′).     

A global approach to the design of discrete-time cellular neural networks for associative memories

In this paper a global design method for associative memories using discrete-time cellular neural networks (DTCNNs) is presented. The proposed synthesis technique enables to realize associative memories with several advantageous features. First of all, grey-level as well as bipolar images can be stored. Moreover, the proposed approach generates networks with learning and forgetting capabilities. Finally, it is possible to design networks with any kind of predetermined interconnection structure. In particular, neighbourhoods without line crossings can be chosen, greatly simplifying the VLSI implementation of the designed DTCNNs. In the first part of this work a model of a multilevel threshold network is presented and a stability analysis is carried out using basic notions deriving from non-linear dynamical system theory. The synthesis procedure is then developed by means of a pseudoinversion technique, assuring learning and forgetting capabilities of the designed DTCNN. The use of a neighbourhood without line crossings is also discussed. Simulation results are reported to show the capability of the proposed approach.     

Physical,dynamic-mechanical and thermogravimetric analysis of aromatic and cycloaliphatic-based poly(urethaneurea)s

Experimental batches of linear rubber-like polyurethanes characterized by the presence of chemically different hard segments are studied and their thermal and dynamic-mechanical properties are related to the differences in chemical compositions. Interesting correlations are found between the development of crystallinity in such elastomeric poly(urethaneurea)s and the aromatic or alicyclic nature of the diisocyanate. Moreover, for a fixed ratio between hard and soft segments, and for a given composition of the soft segment, the results seem to indicate a better degree of phase separation in cycloaliphatic-based hard segment poly(urethaneurea)s than in aromatic-based hard segment poly(urethaneurea)s.