Effect of sourdough fermentation on stabilisation,and chemical and nutritional characteristics of wheat germ

Lactic acid bacteria strains were identified from wheat germ by 16S rRNA partial sequencing, subjected to RAPD-PCR typing and screened. Lactobacillus plantarum LB1 and Lactobacillus rossiae LB5 were used as starters to produce sourdough fermented wheat germ (SFWG). The chemical and nutritional characteristics of SFWG were compared to those of the raw wheat germ (RWG). Lipase activity in SFWG was ca. 2.6-fold lower than that found in RWG. As shown by SPME/GC/MS analysis, most of the volatile compounds derived from lipid oxidation during storage (40 days) were at markedly lower levels in SFWG compared to RWG. Fermentation of wheat germ increased of ca. 50% the concentration of free amino acids. Glu markedly decreased in SFWG, due to its conversion in GABA. The concentration of the anti-nutritional factor raffinose also decreased in SFWG. The in vitro protein digestibility, the concentration of total phenols, phytase and antioxidant activities were increased by fermentation.     

Validation of a 1-Day Analytical Diagnostic Real-Time PCR for the Detection of Salmonella in Different Food Meat Categories

Foodborne disease caused by Salmonella represents a worldwide public health problem. In Europe, salmonellosis is still the second most commonly recorded zoonosis. Since the standard culture method for detecting Salmonella (ISO 6579:2002) requires up to 5 days to produce results, the need to develop rapid methods represents an important issue for the authorities and the producers. The aim of the present study was the in-house validation, according to ISO 16140, of an open-formula diagnostic real-time PCR for the detection of Salmonella in all the different meat categories reported in the EU Regulations relative to microbiological criteria for food safety. The assay employed specific primers and a probe target within the ttrRSBCA locus, which allows the tetrathionate respiration in Salmonella. Selectivity, relative accuracy, relative sensitivity and relative specificity were established by testing 110 bacterial strains and 175 various edible meat samples. Results showed 100 % selectivity, 100 % relative accuracy, 100 % relative sensitivity and 100 % relative specificity of the real-time PCR when compared to the standard culture method used as reference. In addition, in order to minimize the effect of the competitive micro-flora naturally present on meat samples, a highly nutritious and selective commercial medium (ONE Broth Salmonella, Oxoid) was evaluated in comparison with the classical non-selective pre-enrichment broth (buffered peptone water). Results demonstrated that the ONE Broth Salmonella medium increases the growth of Salmonella in the presence of competitive micro-flora.     

Effect of Vacuum and Modified Atmosphere Packaging on the Shelf-life of Liquid-smoked Swordfish (Xiphias gladius) Slices

ABSTRACT: Swordfish fillets, dry-salted and treated with liquid smoke, were sliced and packed in vacuum conditions and under modified atmosphere (MA) (5% O₂,45% CO₂, 50% N₂) and stored at chilled temperature (4°C) to determine the effect of different packaging on shelf-life. Sensory attributes, total volatile basic nitrogen (TVB-N), pH, lipid oxidation by thiobarbituric acid test, and microbiological counts were monitored during 45 d of storage. The TVB-N increased to levels recommended by European regulation at the time of sensory rejection, resulting as the most reliable parameter of quality decay. Lipid oxidation was low and microbial counts could not be correlated with quality decay. Sensory rejection (at least 50% of the assessors scoring =5 in a scale from 1 to 9) was sooner for MA-packed samples (12d) than for vacuum-packed ones (42d).     

Pd/Ce0.6Zr0.4O2/Al2O3 as advanced materials for three-way catalysts: Part 1. Catalyst characterisation, thermal stability and catalytic activity in the reduction of NO by CO

Pd-loaded Ce_0.6Zr_0.4O₂ solid solutions supported on Al₂O₃ are investigated as catalysts for the reduction of NO by CO. The attention is focused on the role of the Ce_0.6Zr_0.4O₂ and of the Pd dispersion on the catalytic activity. The system shows a very high activity below 500 K, which is almost independent on the Pd dispersion. The high activity is attributed to a promoting effect of the Ce_0.6Zr_0.4O₂ on the NO conversion. Investigation of the influence of high temperature treatments disclosed a thermal stabilisation of both Ce_0.6Zr_0.4O₂ and Al₂O₃ in the Ce_0.6Zr_0.4O₂/Al₂O₃ system.     

Microstructural Evolution in Liquid-Phase-Sintered SiC: Part III, Effect of Nitrogen-Gas Sintering Atmosphere

Effects of N₂ sintering atmosphere and the starting SiC powder on the microstructural evolution of liquid-phase-sintered (LPS) SiC were studied. It was found that, for the β-SiC starting powder case, there was complete suppression of the β→α phase transformation, which otherwise goes to completion in Ar atmosphere. It was also found that the microstructures were equiaxed and that the coarsening was severely retarded, which was in contrast with the Ar-atmosphere case. Chemical analyses of the specimens sintered in N₂ atmosphere revealed the presence of significant amounts of nitrogen, which was believed to reside mostly in the intergranular phase. It was argued that the presence of nitrogen in the LPS SiC helped stabilize the β-SiC phase, thereby preventing the β→α phase transformation and the attendant formation of elongated grains. To investigate the coarsening retardation, internal friction measurements were performed on LPS SiC specimens sintered in either Ar or N₂ atmosphere. For specimens sintered in N₂ atmosphere, a remarkable shift of the grain-boundary sliding relaxation peak toward higher temperatures and very high activation energy values were observed, possibly due to the incorporation of nitrogen into the structure of the intergranular liquid phase. The highly refractory and viscous nature of the intergranular phase was deemed responsible for retarding the solution–reprecipitation coarsening in these materials. Parallel experiments with specimens sintered using α-SiC starting powders further reinforce these arguments. Thus, processing of LPS SiC in N₂ atmosphere open the possibility of tailoring their microstructures for room-temperature mechanical properties and for making high-temperature materials that are highly resistant to coarsening and creep.     

Well defined CuI(NO), CuI(NO)2 and CuII(NO)X (X = O− and/or NO 2 − ) complexes in CuI-ZSMS prepared by interaction of H-ZSM5 with gaseous CuCl

In this note an exchange procedure of the acidic protons of H-ZSM5 by Cu^I ions through reaction with CuCl in the gas phase is described. In the so obtained Cu^I-ZSM5 exchanged zeolite the Cu^I ions are in well defined configuration and form with NO mono and di-nitrosyl complexes of high structural and spectroscopic quality. The Cu^I(NO)₂ species are transformed at RT into Cu^II(NO)X (X=O^– and/or NO ₂ ^– ) species which could represent an intermediate in NO decomposition.     

A global approach to the physics validation of simulation codes for future nuclear systems

This paper presents a global approach to the validation of the parameters that enter into the neutronics simulation tools for advanced fast reactors with the objective to reduce the uncertainties associated to crucial design parameters. This global approach makes use of sensitivity/uncertainty methods; statistical data adjustments; integral experiment selection, analysis and “representativity” quantification with respect to a reference system; scientifically based cross-section covariance data and appropriate methods for their use in multigroup calculations. This global approach has been applied to the uncertainty reduction on the criticality of the Advanced Burner Reactor (both metal and oxide core versions) presently investigated in the frame of the GNEP initiative. The results obtained are very encouraging and allow to indicate some possible improvements of the ENDF/B-VII data file.     

Chitosan Functionalized with Carboxyl Groups as a Recyclable Biomaterial for the Adsorption of Cu (II) and Zn (II) Ions in Aqueous Media

The modification of chitosan represents a challenging task in obtaining biopolymeric materials with enhanced removal capacity for heavy metals. In the present work, the adsorption characteristics of chitosan modified with carboxyl groups (CTS-CAA) towards copper (II) and zinc (II) ions have been tested. The efficacy of the synthesis of CTS-CAA has been evaluated by studying various properties of the modified chitosan. Specifically, the functionalized chitosan has been characterized by using several techniques, including thermal analyses (differential scanning calorimetry and thermogravimetry), spectroscopies (FT-IR, XRD), elemental analysis, and scanning electron microscopy. The kinetics and the adsorption isotherms of CTS-CAA towards both Cu (II) and Zn (II) have been determined in the aqueous solvent under variable pH. The obtained results have been analyzed by using different adsorption models. In addition, the experiments have been conducted at variable temperatures to explore the thermodynamics of the adsorption process. The regeneration of CTS-CAA has been investigated by studying the desorption process using different eluents. This paper reports an efficient protocol to synthesize chitosan-based material perspective as regenerative adsorbents for heavy metals.     

An Empirical Study on the Impact of Automation on the Requirements Analysis Process

Requirements analysis is an important phase in a software project. The analysis is often performed in an informal way by specialists who review documents looking for ambiguities, technical inconsistencies and incomplete parts. Automation is still far from being applied in requirements analyses, above all since natural languages are informal and thus difficult to treat automatically. There are only a few tools that can analyse texts. One of them, called QuARS, was developed by the Istituto di Scienza e Tecnologie dell＇Informazione and can analyse texts in terms of ambiguity. This paper describes how QuARS was used in a formal empirical experiment to assess the impact in terms of effectiveness and efficacy of the automation in the requirements review process of a software company.     

Biological Effects of Cyclin-Dependent Kinase Inhibitors Ribociclib,Palbociclib and Abemaciclib on Breast Cancer Bone Microenvironment

The CDK4/6 inhibitors (CDKi) palbociclib, ribociclib, and abemaciclib are currently approved in combination with anti-estrogen therapy for the treatment of advanced and/or metastatic hormone receptor-positive/HER2-neu-negative breast cancer patients. Given the high incidence of bone metastases in this population, we investigated and compared the potential effects of palbociclib, ribociclib, and abemaciclib on the breast cancer bone microenvironment. Primary osteoclasts (OCs) and osteoblasts (OBs) were obtained from human monocyte and mesenchymal stem cells, respectively. OC function was evaluated by tartrate-resistant acid phosphatase assay and real-time PCR; OB activity was assessed by an alizarin red assay. OB/breast cancer co-culture models were generated via the seeding of MCF-7 cells on a layer of OBs, and tumor cell proliferation was analyzed using flow cytometry. Here, we showed that ribociclib, palbociclib, and abemaciclib exerted similar inhibitory effects on the OC differentiation and expression of bone resorption markers without affecting OC viability. On the other hand, the three CDKi did not affect the ability of OB to produce bone matrix, even if the higher doses of palbociclib and abemaciclib reduced the OB viability. In OB/MCF-7 co-culture models, palbociclib demonstrated a lower anti-tumor effect than ribociclib and abemaciclib. Overall, our results revealed the direct effects of CDKi on the tumor bone microenvironment, highlighting differences potentially relevant for clinical practice.