Boron removal from aqueous solutions by activated carbon impregnated with salicylic acid

In this study, the removal of boric acid from aqueous solution by activated carbon impregnated with salicylic acid was studied in batch system. pH, adsorbent amount, initial boron concentration, temperature, shaking rate and salicylic acid film thickness were chosen as parameters. Boron removal efficiencies increased with increasing adsorbent amount, temperature and pH, decreasing initial boron concentration. As thickness of salicylic acid film on activated carbon becomes thin up to 0.088nm, the efficiency increased, and then, the efficiency decreased with becoming thinner than 0.088nm of salicylic acid film. Shaking rate was no effect on removal efficiency. In result, it was determined that the use of salicylic acid as an impregnant for activated carbon led to the increase of the amount of boron adsorbed. A lactone ring, being the most appropriate conformation, forms between boric acid and -COOH and -OH groups of salicylic acid.     

RGS14 Regulation of Post-Synaptic Signaling and Spine Plasticity in Brain

The regulator of G-protein signaling 14 (RGS14) is a multifunctional signaling protein that regulates post synaptic plasticity in neurons. RGS14 is expressed in the brain regions essential for learning, memory, emotion, and stimulus-induced behaviors, including the basal ganglia, limbic system, and cortex. Behaviorally, RGS14 regulates spatial and object memory, female-specific responses to cued fear conditioning, and environmental- and psychostimulant-induced locomotion. At the cellular level, RGS14 acts as a scaffolding protein that integrates G protein, Ras/ERK, and calcium/calmodulin signaling pathways essential for spine plasticity and cell signaling, allowing RGS14 to naturally suppress long-term potentiation (LTP) and structural plasticity in hippocampal area CA2 pyramidal cells. Recent proteomics findings indicate that RGS14 also engages the actomyosin system in the brain, perhaps to impact spine morphogenesis. Of note, RGS14 is also a nucleocytoplasmic shuttling protein, where its role in the nucleus remains uncertain. Balanced nuclear import/export and dendritic spine localization are likely essential for RGS14 neuronal functions as a regulator of synaptic plasticity. Supporting this idea, human genetic variants disrupting RGS14 localization also disrupt RGS14’s effects on plasticity. This review will focus on the known and unexplored roles of RGS14 in cell signaling, physiology, disease and behavior.     

Synthesis of ZnO: Ge nanocomposite thin films by plasma gas condensation

In this work, we introduce a new method for the synthesis of Ge nanoparticles embedded ZnO thin films that are considered to be a potential candidate for photovoltaic applications. As opposed to current techniques, for the independent preparation of Ge nanoparticles, we propose using Cluster Deposition Source (CDS), which utilizes gas condensation of sputtered Ge atoms. For the synthesis of ZnO thin film host material conventional sputtering technique is employed. In the proposed technique independently synthesized Ge nanoparticles and ZnO thin films are combined into a composite structure on (100) oriented Si substrates. X-ray diffraction (XRD) patterns of the samples have revealed that Ge nanoparticles preferentially settle on (113) planes on top of the (002) oriented ZnO layer. It is realized that Ge nanoparticles with sizes ranging from 16 nm to 20 nm could be embedded into a well-defined ZnO matrix. In fact, transmission electron microscopy (TEM) studies performed on Ge nanoparticles captured on a Cu grids placed just above the substrate during deposition for about 60 s have manifested that Ge nanoparticles reach to ZnO matrix as clusters composed of particles with sizes of about 7–8 nm and then eventually grow larger due to substrate heating implemented during capping layer deposition. Optical absorption measurements have revealed that Ge nanoparticle inclusion lead to an additional absorption edge at about 2.75 eV along with 3.17 eV edge resulting from ZnO host.     

Influence of residual elements in lead on oxygen- and hydrogen-gassing rates of lead-acid batteries

Raw lead materials contain many residual elements. With respect to setting ‘safe’ levels for these elements, each country has its own standard, but the majority of the present specifications for the lead used to prepare battery oxide apply to flooded batteries that employ antimonial grids. In these batteries, the antimony in the positive and negative grids dominates gassing characteristics so that the influence of residual elements is of little importance. This is, however, not the case for valve-regulated lead-acid (VRLA) batteries, which use antimony-free grids and less sulfuric acid solution. Thus, it is necessary to specify ‘acceptable’ levels of residual elements for the production of VRLA batteries. In this study, 17 elements are examined, namely: antimony, arsenic, bismuth, cadmium, chromium, cobalt, copper, germanium, iron, manganese, nickel, selenium, silver, tellurium, thallium, tin, and zinc. The following strategy has been formulated to determine the acceptable levels: (i) selection of a control oxide; (ii) determination of critical float, hydrogen and oxygen currents; (iii) establishment of a screening plan for the elements; (iv) development of a statistical method for analysis of the experimental results. The critical values of the float, hydrogen and oxygen currents are calculated from a field survey of battery failure data. The values serve as a base-line for comparison with the corresponding measured currents from cells using positive and negative plates produced either from the control oxide or from oxide doped with different levels of the 17 elements in combination. The latter levels are determined by means of a screening plan which is based on the Plackett-Burman experimental design. Following this systematic and thorough exercise, two specifications are proposed for the purity of the lead to be used in oxide production for VRLA technology.     

Effect of Microstructure on Exhaust Manifold Cracks Produced From SiMo Ductile Iron

Ductile cast irons are used as high temperature materials in internal combustion engines,because they are microstructurally stable at high operating temperatures.SiMo granular graphite cast irons contain Fe2 MoC and M6C carbide precipitates due to their higher concentration of both silicon and molybdenum.The microstructure of these cast irons consists of carbides dispersed within the ferrite matrix.The microstructural change and the crack formation mechanism in manifolds produced from SiMo ductile iron are studied.Chemical analysis,optical and scanning electron microscope studies have been completed and evaluated.     

Bend‐bend‐twist vibrations of a wind turbine blade

Dynamics of a wind turbine blade under bend‐bend‐twist coupled vibrations is investigated. The potential and kinetic energy expressions for a straight nonuniform blade are written in terms of beam parameters. Then, the energies are expressed in terms of modal coordinates by using the assumed mode method, and the equations of motion are found by applying Lagrange's formula. The bend‐bend‐twist equations are coupled with each other and have stiffness variations due to centrifugal effects and gravitational parametric terms, which vary cyclicly with the hub angle. To determine the natural frequencies and mode shapes of the system, a modal analysis is applied on the linearized coupled equations of constant angle snapshots of a blade with effects of constant speed rotation. Lower modes of the coupled bend‐bend‐twist model are dominantly in‐plane or out‐of‐plane modes. To investigate the parametric effects, several blade models are analyzed at different angular positions. The stiffness terms involving centrifugal and gravitational effects can be significant for long blades. To further see the effect of blade length on relative parametric stiffness change, the blade models are scaled in size and analyzed at constant rotational speeds, at horizontal and vertical orientations. These studies show that the parametric stiffness effects should be taken into account when designing long blades.     

Cadmium and lead contamination in vegetables collected from industrial, traffic and rural areas in Bursa Province, Turkey

Cadmium and lead contamination of vegetables produced in rural areas of Bursa Province, Turkey, was found to be less contaminated than vegetables grown close to heavy traffic and industrial activities. The highest levels of cadmium and lead were found in lettuce; the lowest levels in vegetables were found in leeks. The lead levels in spinach grown in traffic areas were at least twofold higher than those found in industrial areas. For other vegetables, the results from industrial and traffic areas were almost identical. Lettuce grown in traffic areas had the highest amount of cadmium (0.81 +/- 0.25 mg kg(-1)) and lead (1.59 +/- 0.45 mg kg(-1)), whilst leeks grown in rural areas had the lowest levels of lead (0.10 +/- 0.03 mg kg(-1)) and cadmium (0.05 +/- 0.01 mg kg(-1)) compared with other vegetables. This study shows that people and animals living in the same area in Bursa are always exposed to metallic pollution and in turn the consumption of contaminated vegetables could lead to increased dietary intake.