Stimulating Biological Nitrification via Electrolytic Oxygenation

The feasibility of electric current prompted aerobic biodegradation of NH4+–N in an attached growth bioreactor system is demonstrated. Nitrification was induced at electric current densities of 1.25 and 2.5?mA/cm2 and with pure oxygen supplied at a rate equivalent to 1.25?mA/cm2 when the bioreactor was operated in batch mode at 6 days detention time. About 84% (27?mg/L)?NH4+–N loss was observed at the end of each detention period during all three experimental conditions, indicating that the electric current did not negatively impact the rate of nitrification. Nitrite accumulation was observed during the initial stages of nitrification experiments with 1.25?mA/cm2 current intensity, but nitrite did not accumulate during the other two sets of nitrification experiments. A mathematical model formulated to obtain the rates of biological reactions showed that rates of NH4+–N removal are similar for all aeration conditions. Abiotic experiments showed that NH4+–N was not removed electrolytically and via stripping, confirming that NH4+–N disappearance is due to biological activity.     

Kinetics of the Hydrolysis of some alkyl halides in aqueous ethyl alcohol

A comparison of the rates of substitution and elimination reactions occuring simultaneously in alkaline hydrolysis of n-amyl chloride, isoamyl chloride, n-amyl iodide and n-hexyl iodide at different temperatures and in varying alcohol-water mixtures, has been made. Under the same conditions the rates of solvolysis of these halides have also been reported. In the case of n-amyl halides there is a much larger rate difference between chloride and bromide than between bromide and iodide.     

An Adaptive Role for DNA Double-Strand Breaks in Hippocampus-Dependent Learning and Memory

DNA double-strand breaks (DSBs), classified as the most harmful type of DNA damage based on the complexity of repair, lead to apoptosis or tumorigenesis. In aging, DNA damage increases and DNA repair decreases. This is exacerbated in disease, as post-mortem tissue from patients diagnosed with mild cognitive impairment (MCI) or Alzheimer’s disease (AD) show increased DSBs. A novel role for DSBs in immediate early gene (IEG) expression, learning, and memory has been suggested. Inducing neuronal activity leads to increases in DSBs and upregulation of IEGs, while increasing DSBs and inhibiting DSB repair impairs long-term memory and alters IEG expression. Consistent with this pattern, mice carrying dominant AD mutations have increased baseline DSBs, and impaired DSB repair is observed. These data suggest an adaptive role for DSBs in the central nervous system and dysregulation of DSBs and/or repair might drive age-related cognitive decline (ACD), MCI, and AD. In this review, we discuss the adaptive role of DSBs in hippocampus-dependent learning, memory, and IEG expression. We summarize IEGs, the history of DSBs, and DSBs in synaptic plasticity, aging, and AD. DSBs likely have adaptive functions in the brain, and even subtle alterations in their formation and repair could alter IEGs, learning, and memory.     

Analysis of PC6 window function using fractional Fourier transform

Fractional Fourier transform (FRFT) is a linear transform generalizing Fourier transform (FT) that plays an important role in the field of signal processing and analysis. FRFT contains an adjustable parameter α, which it rotates the signal in the time frequency plane and represents the signal in an intermediate domain between time and frequency. FRFT provides a measure about the angular distribution of signal's energy in time frequency plane. FT is a special case of FRFT when angle α is equal to π/2. This paper presents mathematical model for obtaining FRFT of PC6 window function. The different parameters of this window function are also obtained with the help of simulation results. A comparison of window function parameters is presented using FT and FRFT. Also comparison of this window function with Hanning window function is presented in terms of Side Lobe Fall off Rate (SLFOR). For different values of FRFT order, PC6 window function shows variation in different parameters. Thus by changing the FRFT order, the minimum stop band attenuation of the resulting window function can be controlled.     

Chemical composition and inhibitory parameters of essential oil and extracts of Nandina domestica Thunb. to control food-borne pathogenic and spoilage bacteria

The aim of this study was to examine the chemical composition of the essential oil isolated from the floral parts of Nandina domestica Thunb. by hydrodistillation, and to test the efficacy of essential oil and various organic extracts against a panel of food-borne pathogenic and spoilage bacteria such as Bacillus subtilis ATCC6633, Listeria monocytogenes ATCC19166, Staphylococcus aureus KCTC1916, S. aureus ATCC6538, Pseudomonas aeruginosa KCTC2004, Salmonella typhimurium KCTC2515, Salmonella enteridis KCCM12021, Escherichia coli 0157-Human, E. coli ATCC8739, E. coli 057:H7 ATCC43888 and Enterobacter aerognes KCTC2190. The chemical composition of essential oil was analysed by GC-MS. It was determined that 79 compounds, which represented 87.06% of total oil, were present in the oil. The oil contained mainly 1-indolizino carbazole (19.65%), 2-pentanone (16.4%), mono phenol (12.1%), aziridine (9.01%), methylcarbinol (4.6%), ethanone (3.3%), furfural (2.96%), 3,5-dimethylpyrazole (1.29%) and 2(5H)-furanone (1.32%). The oil (1000 ppm/disc), and various organic extracts of hexane, chloroform, ethyl acetate and methanol (1500 ppm/disc) exhibited promising antibacterial effect as a diameter of zones of inhibition (9-18 and 7-13 mm) and MIC values (62.5 to 1000 and 250 to 2000 microg/ml), respectively against the tested bacteria. Also the oil had strong detrimental effect on the viable count of the tested bacteria. These results indicate the potential efficacy of plant-based natural products such as essential oil and organic extracts of N. domestica to control food-borne pathogenic and spoilage bacteria.     

Sliding eigenvalue decomposition-based cross-term suppression in Wigner–Ville distribution

Journal of Computational Electronics - In this paper, a new method for the cross-term-free Wigner–Ville distribution (WVD) is proposed. The proposed method is based on sliding...     

x-index: Identifying core competency and thematic research strengths of institutions using an NLP and network based ranking framework

Scientometrics - The currently prevailing international ranking systems for institutions are limited in their assessment as they only provide assessments either at an overall level or at very broad...     

Cavitation Erosion Characteristics of Nitrocarburized and HPDL-Treated Martensitic Stainless Steels

This article deals with plasma ion-nitrocarburising and high power diode laser (HPDL) surface treatment of 13Cr4Ni and X10CrNiMoV1222 martensitic stainless steels to enhance their cavitation erosion resistance. These steels are commonly used in hydro turbines and boiler feed pumps. These treated steels have been evaluated for cavitation erosion resistance and it has been observed that the plasma ion-nitrocarburising process has significantly enhanced the cavitation erosion resistance as compared to untreated steel whereas HPDL-treated steels have shown marginal improvement. This is due to formation of high hardness nitrides during nitrocarburising and formation of moderate hardness martensitic phase due to rapid heating and cooling rates involved in HPDL treatment. The cavitation erosion and micro-hardness data of plasma ion-nitrocarburized as well as HPDL-treated steel samples and their comparison with hard deposits such as stellite and HVOF coating form the main part of the article.     

On the polymeric foams: modeling and properties

Polymeric foams are now widely used and researched. The physical properties of polymeric foam can be related to a set of independent structural parameters or variables of the foam. Study of these variables and correlation with commercial FE packages is essential for reliable and faster product development. Some aspects of foam behavior are widely studied while some are little less, like correlation of physical unloading behavior. For example, a lot of work in the area of phenomenological constitutive modeling of uniaxial loading was done, though research in areas of unloading–reloading and their correlation still demands more attention. Increasing number of OEMs and suppliers are moving to computer simulations in the design phase to assess their future products. Hence, different parameters within FE packages play a significant role and also affect the results. Appropriate use of these parameters will narrow down error band and automatically reduce the cycle time and development cost. This brief review is expected to set the perspective for major research work done so far in terms of FE modeling correlation and constitutive modeling of polymeric foam vis-a-vis to its properties.